ELN-30-9P MEANWELL AC-DC Single output LED driver Mix mode (CV+CC), Output 9VDC / 3.4A, Dimming with PWM

30W Single Output switching Power supply 30W Single Output switching Power supply
30W Single Output switching Power supply ELN-30series ELN-30series
ELN-30seriesFeatures : Features :
Features : UniversalAC input / Full range UniversalAC input / Full range
UniversalAC input / Full range Protections: short circuit / Over current/ Over voltage Protections: short circuit / Over current/ Over voltage
Protections: short circuit / Over current/ Over voltage Cooling by free air convection Cooling by free air convection
Cooling by free air convection Built-in constant currentlimiting circuit with level adjustment OCP Built-in constant currentlimiting circuit with level adjustment OCP
Built-in constant currentlimiting circuit with level adjustment OCP Optional dimming function : 1.1<10VDC(D type) or PWM (P type) controlled Optional dimming function : 1.1<10VDC(D type) or PWM (P type) controlled
Optional dimming function : 1.1<10VDC(D type) or PWM (P type) controlled Fully isolated plastic case with IP64 level Fully isolated plastic case with IP64 level
Fully isolated plastic case with IP64 level Classpower unit, no FG Classpower unit, no FG
Classpower unit, no FG Class 2 power unit Class 2 power unit
Class 2 power unit Pass LPS Pass LPS
Pass LPS Suitable for LED lighting and moving sign applications (Note.8) Suitable for LED lighting and moving sign applications (Note.8)
Suitable for LED lighting and moving sign applications (Note.8) 100% full load burn-in test 100% full load burn-in test
100% full load burn-in test Low-cost Low-cost
Low-cost 2 years warranty 2 years warranty
2 years warrantySPECIFICATION SPECIFICATION
SPECIFICATIONLPS LPS
LPSIP64 IP64
IP64( for 48V only) ( except for 48V ) ( for 48V only) ( except for 48V )
( for 48V only) ( except for 48V ) MODEL ELN-30-5 ELN-30-9 ELN-30-12 ELN-30-15 ELN-30-24 ELN-30-27 ELN-30-48 MODEL ELN-30-5 ELN-30-9 ELN-30-12 ELN-30-15 ELN-30-24 ELN-30-27 ELN-30-48
MODEL ELN-30-5 ELN-30-9 ELN-30-12 ELN-30-15 ELN-30-24 ELN-30-27 ELN-30-48 THE DC VOLTAGE THE DC VOLTAGE
THE DC VOLTAGE 5V 9V 5V 9V
5V 9V 12V 12V
12V 15V 15V
15V 24V 24V
24V 27V 27V
27V 48V 48V
48V LED OPERATION VOLTAGE Note.7 3 ~ 5V LED OPERATION VOLTAGE Note.7 3 ~ 5V
LED OPERATION VOLTAGE Note.7 3 ~ 5V 3 ~ 9V 3 ~ 9V
3 ~ 9V 3 ~ 12V 3 ~ 12V
3 ~ 12V 3 ~ 15V 3 ~ 15V
3 ~ 15V 3 ~ 24V 3 ~ 24V
3 ~ 24V 3 ~ 27V 3 ~ 27V
3 ~ 27V 3 ~ 48V 3 ~ 48V
3 ~ 48V RATED CURRENT CURRENT RANGE RATED POWER RATED CURRENT CURRENT RANGE RATED POWER
RATED CURRENT CURRENT RANGE RATED POWER 5A 3.4 A 2.5 A 2A 1.25 A 1.12 A 0.63 A 5A 3.4 A 2.5 A 2A 1.25 A 1.12 A 0.63 A
5A 3.4 A 2.5 A 2A 1.25 A 1.12 A 0.63 A 0 ~ 5A0 ~ 3.4 0 ~ 2.5 0 ~ 2A0 ~ 1.25 A 0 ~ 1.12 A 0 ~ 0.63 A 0 ~ 5A0 ~ 3.4 0 ~ 2.5 0 ~ 2A0 ~ 1.25 A 0 ~ 1.12 A 0 ~ 0.63 A
0 ~ 5A0 ~ 3.4 0 ~ 2.5 0 ~ 2A0 ~ 1.25 A 0 ~ 1.12 A 0 ~ 0.63 A 25W 30.6W30W 30W 30W 30.24W30.24W 25W 30.6W30W 30W 30W 30.24W30.24W
25W 30.6W30W 30W 30W 30.24W30.24W RIPPLE & NOISE (max.) Note.2 80mVp-p100mVp-p120mVp-p120mVp-p150mVp-p150mVp-p250mVp-p RIPPLE & NOISE (max.) Note.2 80mVp-p100mVp-p120mVp-p120mVp-p150mVp-p150mVp-p250mVp-p
RIPPLE & NOISE (max.) Note.2 80mVp-p100mVp-p120mVp-p120mVp-p150mVp-p150mVp-p250mVp-pOUTPUT VOLTAGE ADJ. RANGE of OUTPUT VOLTAGE ADJ. RANGE of
OUTPUT VOLTAGE ADJ. RANGE of 4.5 ~ 5.5 V 4.5 ~ 5.5 V
4.5 ~ 5.5 V 8.7 ~ 10.5V10.8 ~ 13.2V13.5 ~ 16.5V21.6 ~ 26.4V24.3 ~ 29.7V43.2 ~ 52.8 V 8.7 ~ 10.5V10.8 ~ 13.2V13.5 ~ 16.5V21.6 ~ 26.4V24.3 ~ 29.7V43.2 ~ 52.8 V
8.7 ~ 10.5V10.8 ~ 13.2V13.5 ~ 16.5V21.6 ~ 26.4V24.3 ~ 29.7V43.2 ~ 52.8 VCURRENT ADJ. RANGE of CURRENT ADJ. RANGE of
CURRENT ADJ. RANGE of Can be adjusted by internal potentiometer SVR1 Can be adjusted by internal potentiometer SVR1
Can be adjusted by internal potentiometer SVR1 -25% ~3%. Can be adjusted by internal potentiometer SVR2 -25% ~3%. Can be adjusted by internal potentiometer SVR2
-25% ~3%. Can be adjusted by internal potentiometer SVR2 VOLTAGE TOLERANCE Note.35.0% VOLTAGE TOLERANCE Note.35.0%
VOLTAGE TOLERANCE Note.35.0% LINE REGULATION LOAD REGULATION LINE REGULATION LOAD REGULATION
LINE REGULATION LOAD REGULATION 1.0% 1.0%
1.0% 2.0% 2.0%
2.0% SETUP, RISE TIME Note.6500ms, 80ms / 230VAC1000ms, 80ms / 115VAC at full load SETUP, RISE TIME Note.6500ms, 80ms / 230VAC1000ms, 80ms / 115VAC at full load
SETUP, RISE TIME Note.6500ms, 80ms / 230VAC1000ms, 80ms / 115VAC at full load HOLD TIME (Typ.) HOLD TIME (Typ.)
HOLD TIME (Typ.) 50ms/230VAC16ms/115VAC at full load 50ms/230VAC16ms/115VAC at full load
50ms/230VAC16ms/115VAC at full load VOLTAGE RANGE Note.4 90 ~ 264VAC127 ~ 370VDC VOLTAGE RANGE Note.4 90 ~ 264VAC127 ~ 370VDC
VOLTAGE RANGE Note.4 90 ~ 264VAC127 ~ 370VDC INPUT INPUT
INPUTPROTECTION PROTECTION
PROTECTION FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT (Typ.) FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT (Typ.)
FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) INRUSH CURRENT (Typ.)
INRUSH CURRENT (Typ.) MAX. No. of the power systems on the 16A CIRCUIT BREAKER of LEAKAGE CURRENT MAX. No. of the power systems on the 16A CIRCUIT BREAKER of LEAKAGE CURRENT
MAX. No. of the power systems on the 16A CIRCUIT BREAKER LEAKAGE CURRENTOVER CURRENT MORE CURRENT
MORE CURRENT OVER VOLTAGE OVER VOLTAGE
OVER VOLTAGE 47 ~ 63Hz 47 ~ 63Hz
47 ~ 63Hz 75%80%82%82%85%85%87% 75%80%82%82%85%85%87%
75%80%82%82%85%85%87% 0.75 A/115VAC 0.48 A/230VAC 0.75 A/115VAC 0.48 A/230VAC
0.75 A/115VAC 0.48 A/230VAC COLD start 55A(twidth=465s measured at 50% Ipeak) at 230VAC COLD start 55A(twidth=465s measured at 50% Ipeak) at 230VAC
COLD start 55A(twidth=465s measured at 50% Ipeak) at 230VAC4 units (circuit breaker type B) / 8 units (circuit breaker type C) 230VAC 4 units (circuit breaker type B) / 8 units (circuit breaker type C) 230VAC
4 units (circuit breaker type B) / 8 units (circuit breaker type C) in 230VAC0.25mA / 240VAC 0.25 mA / 240VAC
0.25 mA / 240VAC 95 ~ 110% 95 ~ 110%
95 ~ 110% Protection type : Constant current limiting, recovers automatically after fault condition is removed Protection type : Constant current limiting, recovers automatically after fault condition is removed
Protection type : Constant current limiting, recovers automatically after fault condition is removed 5.75 ~ 6.75V11 ~ 13.5 13.8 V ~ 16V 17.5 ~ 21V 28 ~ 32V31 ~ 36.4 V 54 ~ 60V 5.75 ~ 6.75V11 ~ 13.5 13.8 V ~ 16V 17.5 ~ 21V 28 ~ 32V31 ~ 36.4 V 54 ~ 60V
5.75 ~ 6.75V11 ~ 13.5 13.8 V ~ 16V 17.5 ~ 21V 28 ~ 32V31 ~ 36.4 V 54 ~ 60V Protection type : Shut down o/p voltage, re-power on to recover Protection type : Shut down o/p voltage, re-power on to recover
Protection type : Shut down o/p voltage, re-power on to recover THE FUNCTION DIMMING CONTROL (OPTIONAL) THE FUNCTION DIMMING CONTROL (OPTIONAL)
THE FUNCTION DIMMING CONTROL (OPTIONAL) WORKING TEMP. WORKING HUMIDITY WORKING TEMP. WORKING HUMIDITY
WORKING TEMP. WORKING HUMIDITY 1.1 ~ 10VDC or PWM signal : 100Hz ~ 3KHz 1.1 ~ 10VDC or PWM signal : 100Hz ~ 3KHz
1.1 ~ 10VDC or PWM signal : 100Hz ~ 3KHz -20 ~ +60 (Refer to "Reduction Curve") -20 ~ +60 (Refer to "Reduction Curve")
-20 ~ +60 (Refer to "Reduction Curve") 20 ~ 90% RH non-condensing 20 ~ 90% RH non-condensing
20 ~ 90% RH non-condensing ENVIRONMENT ENVIRONMENT
ENVIRONMENT SAFETY AND EMC SAFETY AND EMC
SECURITY AND EMCOTHERS OTHER
OTHER STORAGE TEMP., THE HUMIDITY TEMP. COEFFICIENT VIBRATION STORAGE TEMP., THE HUMIDITY TEMP. COEFFICIENT VIBRATION
STORAGE TEMP., THE HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION SAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION
SAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF DIMENSION EMC IMMUNITY MTBF DIMENSION
EMC IMMUNITY MTBF DIMENSION PACKAGING PACKAGING
PACKAGING -40 ~ +80, 10 ~ 95% RH -40 ~ +80, 10 ~ 95% RH
-40 ~ +80, 10 ~ 95% RH 0.03%/ (0 ~ 50) 0.03%/ (0 ~ 50)
0.03%/ (0 ~ 50) 10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes 10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes
10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes UL1310, CAN/CSA C22.2 No. 223-M91(except for 48V), IP64 approved ; design refer to TUV EN60950-1 UL1310, CAN/CSA C22.2 No. 223-M91(except for 48V), IP64 approved ; design refer to TUV EN60950-1
UL1310, CAN/CSA C22.2 No. 223-M91(except for 48V), IP64 approved ; design refer to TUV EN60950-1 I/P-O/P:3KVAC I/P-O/P:3KVAC
I/P-O/P:3KVAC I/P-O/P:>100m Ohms / 500VDC / 25/ 70% RH I/P-O/P:>100m Ohms / 500VDC / 25/ 70% RH
I/P-O/P:>100m Ohms / 500VDC / 25/ 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2 Class a, EN61000-3-3 Compliance to EN55022 (CISPR22) Class B, EN61000-3-2 Class a, EN61000-3-3
Compliance to EN55022 (CISPR22) Class B, EN61000-3-2 Class a, EN61000-3-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level,criteria A Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level,criteria A
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level,criteria A 628.3 Khrs min.MIL-HDBK-217F (25) 628.3 Khrs min.MIL-HDBK-217F (25)
628.3 Khrs min.MIL-HDBK-217F (25) 145*47*30 mm (L*W*H) 145*47*30 mm (L*W*H)
145*47*30 mm (L*W*H) 0.26 Kg; 60pcs/16.6 Kg/1.25 CUFT 0.26 Kg; 60pcs/16.6 Kg/1.25 CUFT
0.26 Kg; 60pcs/16.6 Kg/1.25 CUFTNOTE NOTE
NOTE 1. All the parameters are NOT speciallymentioned are measured at 230vac input, ratedload and 25 of ambient temperature. 1. All the parameters are NOT speciallymentioned are measured at 230vac input, ratedload and 25 of ambient temperature.
1. All the parameters are NOT speciallymentioned are measured at 230vac input, ratedload and 25 of ambient temperature. 2. Curly and noiseare measured at 20 mhz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 2. Curly and noiseare measured at 20 mhz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.
2. Curly and noiseare measured at 20 mhz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 3. Tolerance : includes setup tolerance, line regulation and load regulation. 3. Tolerance : includes setup tolerance, line regulation and load regulation.
3. Tolerance : includes setup tolerance, line regulation and load regulation. 4. Deratingmay be necessary underlow of the input voltage.Please checkthe static characteristics for more details. 4. Deratingmay be necessary underlow of the input voltage.Please checkthe static characteristics for more details.
4. Deratingmay be necessary underlow of the input voltage.Please checkthe static characteristics for more details. 5. The supply is considered a component which will be operated in combination with final equipment. SinceEMC the performance will be affected by the complete installation,the final equipment manufacturers must re-qualify EMC Directive on the complete installationagain. 5. The supply is considered a component which will be operated in combination with final equipment. SinceEMC the performance will be affected by the complete installation,the final equipment manufacturers must re-qualify EMC Directive on the complete installationagain.
5. The supply is considered a component which will be operated in combination with final equipment. SinceEMC the performance will be affected by the complete installation,the final equipment manufacturers must re-qualify EMC Directive on the complete installationagain. 6. Lengthof installation time is measured at first cold start.Turn on/OFF the supply can lead to the increase of the setup time. 6. Lengthof installation time is measured at first cold start.Turn on/OFF the supply can lead to the increase of the setup time.
6. Lengthof installation time is measured at first cold start.Turn on/OFF the supply can lead to the increase of the setup time. 7. Constant currentoperation region is within the specified output voltagerange up. This is the suitable operation region for LED related applications. 7. Constant currentoperation region is within the specified output voltagerange up. This is the suitable operation region for LED related applications.
7. Constant currentoperation region is within the specified output voltagerange up. This is the suitable operation region for LED related applications. 8. The unit may not be suitable for lighting applications in EU countries. Please checkwith the local authorities for the possible use of the unit. 8. The unit may not be suitable for lighting applications in EU countries. Please checkwith the local authorities for the possible use of the unit.
8. The unit may not be suitable for lighting applications in EU countries. Please checkwith the local authorities for the possible use of the unit.File name:ELN-30-SPEC2015-05-28 File name:ELN-30-SPEC2015-05-28
File name:ELN-30-SPEC2015-05-28