HVG-100-54A MEANWELL AC-DC Single output LED driver Mix mode (CV+CC), Output 1770mA. 95,5W, 27-54V. IP65. Ad..

LED driver with phase input.

Specially designed for powering LEDs directly in a steady stream.

Format in metal boxIP65.

Input range180-528Vca47-63Hz.

Output in constant current1770mA.Adjustable by external potentiometer (970-1770mA).

Range of output voltage with current mode constant27 to 54Vccaccording to demand load.

The output voltage in voltage mode constant54Vcc. Adjustable by external potentiometer (49-58Vcc).

Power:To 95.5 W.

Efficiency typical:91%.

Potentiometers:This model incorporates 2 external potentiometers that allows us to regulate the output voltage and the maximum output current.

Input class I with grounding.

Factor corrector, power>0,98to 230vac at full load.

Operating temperature range of caseTcfrom-40ºCup+90ºC.

Dimensions (Length x Width x Height):236 x 68 x 38,8 mm

5 years of warranty.

Manufacturer: MEAN WELL.

This source is designed to work directly with leds (plates LED or COBs), not with LED strips. Must be equipment that is fed in a steady stream.

This source works on a constant current when we connect the LEDs directly to have a voltage within the range of output voltage mode constant current and a working current equal to the output current. The output current and the output voltage can be adjusted byexternal potentiometerslocated in the housing of the source.

The series HVG are LED drivers, class I grounded.

You can also work in voltage mode constant giving a fixed voltage of 54V if the load is powered at constant voltage and does not overcome the maximum output power.

With metal housing IP65. The series HVG has a high efficiency designed for applications of public lighting, exterior, interior, or any application of LED lighting. Approved HL Class I Division 2 for ex-zones in the US. Complies with the requirements of security at the global level for lighting.

If you want to regulate the LED strips we recommend the series PWM.