LPS-75-3.3 MEANWELL AC-DC Single output Open frame power supply, Output 3.3VDC / 15A

7 5 W S i n g l e O u t p u t S w i t c h i n g P o w e r S u p p l i 7 5 W S i n g l e O u t p u t S w i t c h i n g P o w e r S u p p l i
7 5 W S i n g l e O u t p u t S w i t c h i n g P o w e r S u p p l i L P S - 7 5 s e r i e s L P S - 7 5 s e r i e s
L P S - 7 5 s e r i e s Features : Features :
Features : Universal AC input / Full range Universal AC input / Full range
Universal AC input / Full range Protections: short circuit / Overload / Over voltage Protections: short circuit / Overload / Over voltage
Protections: short circuit / Overload / Over voltage Cooling freeair convection PWM control and regulated Small and compact size Cooling freeair convection PWM control and regulated Small and compact size
Cooling freeair convection PWM control and regulated Small and compact size Built-in remote ON-OFFcontrol Built-in remote ON-OFFcontrol
Built-in remote ON-OFFcontrol LED indicator for power on LED indicator for power on
LED indicator for power on 100% full load burn-in test 100% full load burn-in test
100% full load burn-in test 2 yearswarranty 2 yearswarranty
2 yearswarrantySPECIFICATION SPECIFICATION
SPECIFICATION MODEL MODEL
MODEL LPS-75-3.3 LPS-75-3.3
LPS-75-3.3 LPS-75-5 LPS-75-12 LPS-75-15 LPS-75-24 LPS-75-48 LPS-75-5 LPS-75-12 LPS-75-15 LPS-75-24 LPS-75-48
LPS-75-5 LPS-75-12 LPS-75-15 LPS-75-24 LPS-75-48 DC VOLTAGE RATED CURRENT RANGE RATED POWER DC VOLTAGE RATED CURRENT RANGE RATED POWER
DC VOLTAGE RATED CURRENT RANGE RATED POWER 3.3 V 3.3 V
3.3 V 15A 15A
15A 0 - 16.5 A 0 - 16.5 A
0 - 16.5 A 49.5 W 49.5 W
49.5 W 5V 5V
5V 15A 15A
15A 0 - 16.5 A 0 - 16.5 A
0 - 16.5 A 75W 75W
75W 12V 12V
12V 6.2 6.2
6.2 0 - 6,8 0 - 6,8
0 - 6,8 74.4 W 74.4 W
74.4 W 15V 15V
15V 5A 5A
5A 0 - 5.5 A 0 - 5.5 A
0 - 5.5 A 75W 75W
75W 24V 24V
24V 3.2 3.2
3.2 0 - 3.5 a 0 - 3.5 a
0 - 3.5 a 76.8 W 76.8 W
76.8 W 48V 48V
48V 1.56 A 1.56 A
1.56 A 0 - 1.7 0 - 1.7
0 - 1.7 75W 75W
75W OUTPUT OUTPUT
OUTPUT Maximum LOAD(10 sec.)Note.454.45 W Maximum LOAD(10 sec.)Note.454.45 W
Maximum LOAD(10 sec.)Note.454.45 W RIPPLE & NOISE (max.) Note.280mVp-p RIPPLE & NOISE (max.) Note.280mVp-p
RIPPLE & NOISE (max.) Note.280mVp-p 82.5 W 82.5 W
82.5 W 80mVp-p 80mVp-p
80mVp-p 81.6 W 81.6 W
81.6 W 100mVp-p 100mVp-p
100mVp-p 82.5 W 82.5 W
82.5 W 100mVp-p 100mVp-p
100mVp-p 84W 84W
84W 120mVp-p 120mVp-p
120mVp-p 74.88 W 74.88 W
74.88 W 120mVp-p 120mVp-p
120mVp-p VOLTAGE ADJ. RANGE of VOLTAGE ADJ. RANGE of
VOLTAGE ADJ. RANGE of 3 -3.5 V 3 -3.5 V
3 -3.5 V 4.75 - 5.5 V 4.75 - 5.5 V
4.75 - 5.5 V 11 - 13.5 V 11 - 13.5 V
11 - 13.5 V 13.5 - 16.5 V 13.5 - 16.5 V
13.5 - 16.5 V 22 - 27V 22 - 27V
22 - 27V 45 - 54V 45 - 54V
45 - 54V VOLTAGE TOLERANCENote.33.0%3.0%2.0%2.0%2.0%2.0% LINE REGULATION 1.0%1.0%1.0%1.0%1.0%1.0% LOAD REGULATION 3.0%3.0%2.0%2.0%1.0%1.0% VOLTAGE TOLERANCENote.33.0%3.0%2.0%2.0%2.0%2.0% LINE REGULATION 1.0%1.0%1.0%1.0%1.0%1.0% LOAD REGULATION 3.0%3.0%2.0%2.0%1.0%1.0%
VOLTAGE TOLERANCENote.33.0%3.0%2.0%2.0%2.0%2.0% LINE REGULATION 1.0%1.0%1.0%1.0%1.0%1.0% LOAD REGULATION 3.0%3.0%2.0%2.0%1.0%1.0% SETUP, RISE TIME HOLD TIME (Typ.) VOLTAGE RANGE SETUP, RISE TIME HOLD TIME (Typ.) VOLTAGE RANGE
SETUP, RISE TIME HOLD TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE FREQUENCY RANGE
FREQUENCY RANGE 100ms, 35ms/230VAC100ms, 35ms/115VAC at full load 100ms, 35ms/230VAC100ms, 35ms/115VAC at full load
100ms, 35ms/230VAC100ms, 35ms/115VAC at full load 60ms/230VAC12ms/115VAC at full load 60ms/230VAC12ms/115VAC at full load
60ms/230VAC12ms/115VAC at full load 90 - 264VAC127 - 370VDC 90 - 264VAC127 - 370VDC
90 - 264VAC127 - 370VDC 47 - 63Hz 47 - 63Hz
47 - 63HzINPUT INPUT
INPUT EFFICIENCY(Typ.) EFFICIENCY(Typ.)
EFFICIENCY(Typ.) 69% 69%
69% 77% 80% 81% 83% 83% 77% 80% 81% 83% 83%
77% 80% 81% 83% 83%THE FUNCTION OF PROTECTION THE FUNCTION OF PROTECTION
PROTECTION FUNCTIONENVIRONMENT ENVIRONMENT
ENVIRONMENT AC CURRENT (Typ.) AC CURRENT (Typ.)
AC CURRENT (Typ.) INRUSH CURRENT (Typ.) THE LEAKAGE CURRENT INRUSH CURRENT (Typ.) THE LEAKAGE CURRENT
INRUSH CURRENT (Typ.) THE LEAKAGE OF CURRENTOVERLOAD The OVERHEAD of
OVERLOADOVER VOLTAGE REMOTE ON/OFF OVER VOLTAGE REMOTE ON/OFF
OVER VOLTAGE REMOTE ON/OFF WORKING TEMP. WORKING HUMIDITY WORKING TEMP. WORKING HUMIDITY
WORKING TEMP. WORKING HUMIDITY STORAGE TEMP., The MOISTURE STORAGE TEMP., The MOISTURE
STORAGE TEMP., The MOISTURE 1.9 A/115VAC1.1A/230VAC 1.9 A/115VAC1.1A/230VAC
1.9 A/115VAC1.1A/230VAC COLD START 18A/115VAC 36A/230VAC COLD START 18A/115VAC 36A/230VAC
COLD START 18A/115VAC 36A/230VAC <1mA / 240VAC <1mA / 240VAC
<1mA / 240VAC 115 - 150% rated output power 115 - 150% rated output power
115 - 150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed Protection type : Hiccup mode, recovers automatically after fault condition is removed
Protection type : Hiccup mode, recovers automatically after fault condition is removed 3.8 - 4.45 V 5.75 - 6.75 V 13.8 - 16.2 V 17.25 - 20.25 V 27.6 - 32.4 V 57.6 - 67.2 V Protection type : Hiccup mode, recovers automatically after fault condition is removed 3.8 - 4.45 V 5.75 - 6.75 V 13.8 - 16.2 V 17.25 - 20.25 V 27.6 - 32.4 V 57.6 - 67.2 V Protection type : Hiccup mode, recovers automatically after fault condition is removed
3.8 - 4.45 V 5.75 - 6.75 V 13.8 - 16.2 V 17.25 - 20.25 V 27.6 - 32.4 V 57.6 - 67.2 V Protection type : Hiccup mode, recovers automatically after fault condition is removed RC+/RC- : 0 - 0.8 V power on ; 4 - 10V power off RC+/RC- : 0 - 0.8 V power on ; 4 - 10V power off
RC+/RC- : 0 - 0.8 V power on ; 4 - 10V power off -20 - +70(Refer to "Reduction Curve") -20 - +70(Refer to "Reduction Curve")
-20 - +70(Refer to "Reduction Curve") 20% - 90% RH non-condensing 20% - 90% RH non-condensing
20% - 90% RH non-condensing -20 - +85 , 10% - 95% RH -20 - +85 , 10% - 95% RH
-20 - +85 , 10% - 95% RH TEMP. COEFFICIENT 0.04%/ (0 - 50 TEMP. COEFFICIENT 0.04%/ (0 - 50
TEMP. COEFFICIENT 0.04%/ (0 - 50 SAFETY AND EMC SAFETY AND EMC
SAFETY AND EMC (Note 5) (Note 5)
(Note 5) OTHER OTHER
OTHER The VIBRATION The VIBRATION
The VIBRATION SAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION SAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION
SAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF DIMENSION EMC IMMUNITY MTBF DIMENSION
EMC IMMUNITY MTBF DIMENSION PACKAGING PACKAGING
PACKAGING 10 - 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes 10 - 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes
10 - 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes UL60950-1, TUV EN60950-1 approved UL60950-1, TUV EN60950-1 approved
UL60950-1, TUV EN60950-1 approved I/P-O/P:3KVAC I/P-FG:1.5 KVAC O/P-FG:0.5 KVAC I/P-O/P:3KVAC I/P-FG:1.5 KVAC O/P-FG:0.5 KVAC
I/P-O/P:3KVAC I/P-FG:1.5 KVAC O/P-FG:0.5 KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC/ 25 / 70% RH Compliance to EN55011, EN55022 (CISPR22) Class B, EN61000-3-2,-3 I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC/ 25 / 70% RH Compliance to EN55011, EN55022 (CISPR22) Class B, EN61000-3-2,-3
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC/ 25 / 70% RH Compliance to EN55011, EN55022 (CISPR22) Class B, EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11,EN55024, EN61000-6-2 (EN50082-2) heavy industry level, criteria Compliance to EN61000-4-2,3,4,5,6,8,11,EN55024, EN61000-6-2 (EN50082-2) heavy industry level, criteria
Compliance to EN61000-4-2,3,4,5,6,8,11,EN55024, EN61000-6-2 (EN50082-2) heavy industry level, criteria 355Khrs min.MIL-HDBK-217F (25 ) 355Khrs min.MIL-HDBK-217F (25 )
355Khrs min.MIL-HDBK-217F (25 ) 222*55*30 mm (L*W*H) 222*55*30 mm (L*W*H)
222*55*30 mm (L*W*H) 0.3 Kg; 48pcs/15.6 Kg/1.12 CUFT 0.3 Kg; 48pcs/15.6 Kg/1.12 CUFT
0.3 Kg; 48pcs/15.6 Kg/1.12 CUFTNOTE NOTE
NOTE 1. All parameters NOT specially mentioned are measured at 230vac input, ratedloadand 25 of ambient temperature. 1. All parameters NOT specially mentioned are measured at 230vac input, ratedloadand 25 of ambient temperature.
1. All parameters NOT specially mentioned are measured at 230vac input, ratedloadand 25 of ambient temperature. 2. Ripple and noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 2. Ripple and noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.
2. Ripple and noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 3. Tolerance : includes set up tolerance, line regulation and load regulation.
3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. 33.3% duty cycle maximum within every 30 seconds. Average outputpowershould not exceed the rated power. 4. 33.3% duty cycle maximum within every 30 seconds. Average outputpowershould not exceed the rated power.
4. 33.3% duty cycle maximum within every 30 seconds. Average outputpowershould not exceed the rated power. 5. The supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets 5. The supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
5. The supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to "EMI testing of component powersupplies." (asavailable in http://www.meanwell.com) EMC directives. For guidance on how to perform these EMC tests, please refer to "EMI testing of component powersupplies." (asavailable in http://www.meanwell.com)
EMC directives. For guidance on how to perform these EMC tests, please refer to "EMI testing of component powersupplies." (asavailable in http://www.meanwell.com) File name:LPS-75-SPEC 2011-08-10 File name:LPS-75-SPEC 2011-08-10
File name:LPS-75-SPEC 2011-08-10