PLN-20-24 PLN2024 MEANWELL Input: 90-264 AC / 127-392 DC, Output: 1, V1: 24, A1: 0,8 View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

PLN-20-24 PLN2024 MEANWELL Input: 90-264 AC / 127-392 DC, Output: 1, V1: 24, A1: 0,8

PLN-20-24

PLN2024

MEANWELL

Available

Ship on today

Input: 90-264 AC / 127-392 DC, Output: 1, V1: 24, A1: 0,8

More details


Power Supplies

LED DRIVERS

PLN

* Brand new produt in its original packing covered by the warranties and certifications provided by MEANWELL

QuantityPrice
1+$23.55
13+$21.05
25+$20.57
37+$20.32
50+$20.15
*This price is per unit and is the net value (not including taxes if applicable).

How it Works

How does this work?

1 Add the products of your choice to the shopping cart
2 Enter your contact details and submit your request
3 You will be notified by email with a quotation
4 From the quotation simply finish your order and you will receive the products

There are several options for payment
- Credit card
- Wire Transfer
- PayPal


Related products

More info



20W Single Output LED Power Supply 20W Single Output LED Power Supply
20W Single Output LED Power Supply PLN-20series PLN-20series
PLN-20series Features : Features :
Features : UniversalAC input / Full range(up to 277VAC) UniversalAC input / Full range(up to 277VAC)
UniversalAC input / Full range(up to 277VAC) Protections:Short circuit/Over current/Over voltage/Over temperature Protections:Short circuit/Over current/Over voltage/Over temperature
Protections:Short circuit/Over current/Over voltage/Over temperature Cooling by free air convection Cooling by free air convection
Cooling by free air convection Built-in constant currentlimiting circuit with adjustable OCP level Built-in constant currentlimiting circuit with adjustable OCP level
Built-in constant currentlimiting circuit with adjustable OCP level Fully isolated plastic case Fully isolated plastic case
Fully isolated plastic case Built-in active PFC function Built-in active PFC function
Built-in active PFC function IP64 design for indoor or outdoorinstallations IP64 design for indoor or outdoorinstallations
IP64 design for indoor or outdoorinstallations Small and compact size Small and compact size
Small and compact size Classpower unit, no FG Classpower unit, no FG
Classpower unit, no FG 100% full load burn-in test 100% full load burn-in test
100% full load burn-in test High reliability,low cost High reliability,low cost
High reliability,low cost Suitable for Dry / Damp locations Suitable for Dry / Damp locations
Suitable for Dry / Damp locations Suitable for LED lighting and moving sign applications Suitable for LED lighting and moving sign applications
Suitable for LED lighting and moving sign applications 2 years warranty 2 years warranty
2 years warrantySPECIFICATION SPECIFICATION
SPECIFICATIONF110 F110
F110M MSELV M MSELV
M MSELVIP64.. IP64..
IP64.. MODEL MODEL
MODEL PLN-20-12 PLN-20-12
PLN-20-12 PLN-20-18 PLN-20-24 PLN-20-36 PLN-20-18 PLN-20-24 PLN-20-36
PLN-20-18 PLN-20-24 PLN-20-36 PLN-20-48 PLN-20-48
PLN-20-48 DC VOLTAGE DC VOLTAGE
DC VOLTAGE 12V 12V
12V 18V 18V
18V 24V 24V
24V 36V 36V
36V 48V 48V
48V CONSTANT CURRENT REGION Note.59 ~ 12V CONSTANT CURRENT REGION Note.59 ~ 12V
CONSTANT CURRENT REGION Note.59 ~ 12V 13.5 ~ 18V 13.5 ~ 18V
13.5 ~ 18V 18 ~ 24V 18 ~ 24V
18 ~ 24V 27 ~ 36V 27 ~ 36V
27 ~ 36V 36 ~ 48V 36 ~ 48V
36 ~ 48V RATED CURRENT CURRENT RANGE RATED CURRENT CURRENT RANGE
RATED CURRENT CURRENT RANGE 1.6A 1.6A
1.6A 0 ~ 1.6A 0 ~ 1.6A
0 ~ 1.6A 1.1A0.8A0.55A 1.1A0.8A0.55A
1.1A0.8A0.55A 0 ~ 1.1A0 ~ 0.8A0 ~ 0.55A 0 ~ 1.1A0 ~ 0.8A0 ~ 0.55A
0 ~ 1.1A0 ~ 0.8A0 ~ 0.55A 0.42A 0.42A
0.42A 0 ~ 0.42A 0 ~ 0.42A
0 ~ 0.42A CURRENT ADJ. RANGE 75% ~ 100% CURRENT ADJ. RANGE 75% ~ 100%
CURRENT ADJ. RANGE 75% ~ 100% RATED POWER RATED POWER
RATED POWER 19.2W 19.2W
19.2W 19.8W 19.2W 19.8W 19.8W 19.2W 19.8W
19.8W 19.2W 19.8W 20.2W 20.2W
20.2WOUTPUT OUTPUT
OUTPUT RIPPLE & NOISE (max.) Note.22.5Vp-p RIPPLE & NOISE (max.) Note.22.5Vp-p
RIPPLE & NOISE (max.) Note.22.5Vp-p VOLTAGE TOLERANCE Note.310% VOLTAGE TOLERANCE Note.310%
VOLTAGE TOLERANCE Note.310% 3.0Vp-p 3.0Vp-p 3.0Vp-p 3.0Vp-p 3.0Vp-p 3.0Vp-p
3.0Vp-p 3.0Vp-p 3.0Vp-p 3.8Vp-p 3.8Vp-p
3.8Vp-p LINE REGULATION LOAD REGULATION SETUP TIME LINE REGULATION LOAD REGULATION SETUP TIME
LINE REGULATION LOAD REGULATION SETUP TIME 3.0% 3.0%
3.0% 10% 10%
10% 500ms / 230VAC 2000ms / 115VAC at full load 500ms / 230VAC 2000ms / 115VAC at full load
500ms / 230VAC 2000ms / 115VAC at full load VOLTAGE RANGENote.490 ~ 277VAC127~392VDC VOLTAGE RANGENote.490 ~ 277VAC127~392VDC
VOLTAGE RANGENote.490 ~ 277VAC127~392VDC FREQUENCY RANGE POWER FACTOR FREQUENCY RANGE POWER FACTOR
FREQUENCY RANGE POWER FACTOR TOTAL HARMONIC DISTORTION TOTAL HARMONIC DISTORTION
TOTAL HARMONIC DISTORTION 47 ~ 63Hz 47 ~ 63Hz
47 ~ 63Hz PF0.9 at 75~100% load, 115VAC/230VAC;PF0.9 at 85~100% load 277VAC (Please refer to "Power Factor Characteristic" curve) THD< 20% when output loading75% at 115VAC/230VAC input and output loading75% at 277VAC input PF0.9 at 75~100% load, 115VAC/230VAC;PF0.9 at 85~100% load 277VAC (Please refer to "Power Factor Characteristic" curve) THD< 20% when output loading75% at 115VAC/230VAC input and output loading75% at 277VAC input
PF0.9 at 75~100% load, 115VAC/230VAC;PF0.9 at 85~100% load 277VAC (Please refer to "Power Factor Characteristic" curve) THD< 20% when output loading75% at 115VAC/230VAC input and output loading75% at 277VAC input INPUT INPUT
INPUT EFFICIENCY(Typ.) EFFICIENCY(Typ.)
EFFICIENCY(Typ.) 80% 80%
80% 81%82%83%83.5% 81%82%83%83.5%
81%82%83%83.5% AC CURRENT AC CURRENT
AC CURRENT INRUSH CURRENT(Typ.) MAX. No. of PSUs on 16A INRUSH CURRENT(Typ.) MAX. No. of PSUs on 16A
INRUSH CURRENT(Typ.) MAX. No. of PSUs on 16A CIRCUIT BREAKER CIRCUIT BREAKER
CIRCUIT BREAKER LEAKAGE CURRENT LEAKAGE CURRENT
LEAKAGE CURRENTOVER CURRENT Note.5 OVER CURRENT Note.5
OVER CURRENT Note.5SHORT CIRCUIT SHORT CIRCUIT
SHORT CIRCUIT 0.4A/115VAC 0.2A/230VAC 0.15A/277VAC 0.4A/115VAC 0.2A/230VAC 0.15A/277VAC
0.4A/115VAC 0.2A/230VAC 0.15A/277VAC COLD START 35A(twidth=40s measured at 50% Ipeak) at 230VAC COLD START 35A(twidth=40s measured at 50% Ipeak) at 230VAC
COLD START 35A(twidth=40s measured at 50% Ipeak) at 230VAC98 units (circuit breaker of type B) / 98 units (circuit breaker of type C) at 230VAC 98 units (circuit breaker of type B) / 98 units (circuit breaker of type C) at 230VAC
98 units (circuit breaker of type B) / 98 units (circuit breaker of type C) at 230VAC0.5mA / 240VAC 0.5mA / 240VAC
0.5mA / 240VAC 95 ~ 110% 95 ~ 110%
95 ~ 110% Protection type : Constant current limiting, recovers automatically after fault condition is removed Protection type : Constant current limiting, recovers automatically after fault condition is removed
Protection type : Constant current limiting, recovers automatically after fault condition is removed Hiccup mode, recovers automatically after fault condition is removed. Hiccup mode, recovers automatically after fault condition is removed.
Hiccup mode, recovers automatically after fault condition is removed. PROTECTION PROTECTION
PROTECTION 14 ~ 16V 14 ~ 16V
14 ~ 16V 19 ~ 22V 27 ~ 34V41 ~ 46V54 ~ 60V 19 ~ 22V 27 ~ 34V41 ~ 46V54 ~ 60V
19 ~ 22V 27 ~ 34V41 ~ 46V54 ~ 60VENVIRONMENT ENVIRONMENT
ENVIRONMENTSAFETY & EMC SAFETY & EMC
SAFETY & EMC OTHERS OTHERS
OTHERS OVER VOLTAGE OVER VOLTAGE
OVER VOLTAGEOVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY
OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION
STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION SAFETY STANDARDS WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION
SAFETY STANDARDS WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY EMC IMMUNITY
EMC IMMUNITY MTBF DIMENSION MTBF DIMENSION
MTBF DIMENSION PACKING PACKING
PACKING Protection type : Shut off o/p voltage, clamping by zener diode Protection type : Shut off o/p voltage, clamping by zener diode
Protection type : Shut off o/p voltage, clamping by zener diode Shut down o/p voltage, recovers automatically after temperature goes down Shut down o/p voltage, recovers automatically after temperature goes down
Shut down o/p voltage, recovers automatically after temperature goes down -30 ~ +60C (Refer to "Derating Curve") -30 ~ +60C (Refer to "Derating Curve")
-30 ~ +60C (Refer to "Derating Curve") 20 ~ 90% RH non-condensing 20 ~ 90% RH non-condensing
20 ~ 90% RH non-condensing -40 ~ +80C, 10 ~ 95% RH -40 ~ +80C, 10 ~ 95% RH
-40 ~ +80C, 10 ~ 95% RH 0.06%/C (0 ~ 50C) 0.06%/C (0 ~ 50C)
0.06%/C (0 ~ 50C) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes IEC61347-1, IEC61347-2-13, TUV EN61347-1, EN61347-2-13, UL8750,CSA C22.2 No. 250.0-08,J61347-1, J61347-2-13, IP64 approved IEC61347-1, IEC61347-2-13, TUV EN61347-1, EN61347-2-13, UL8750,CSA C22.2 No. 250.0-08,J61347-1, J61347-2-13, IP64 approved
IEC61347-1, IEC61347-2-13, TUV EN61347-1, EN61347-2-13, UL8750,CSA C22.2 No. 250.0-08,J61347-1, J61347-2-13, IP64 approved I/P-O/P:3.75KVAC I/P-O/P:3.75KVAC
I/P-O/P:3.75KVAC I/P-O/P:100M Ohms/500VDC / 25C/ 70%RH I/P-O/P:100M Ohms/500VDC / 25C/ 70%RH
I/P-O/P:100M Ohms/500VDC / 25C/ 70%RH Compliance to EN55015,EN61000-3-2 Class C(75% load);EN61000-3-3 Compliance to EN55015,EN61000-3-2 Class C(75% load);EN61000-3-3
Compliance to EN55015,EN61000-3-2 Class C(75% load);EN61000-3-3 Compliance to EN61000-4-2,3,4,5,6,8,11;EN61547, light industry level,criteria A Compliance to EN61000-4-2,3,4,5,6,8,11;EN61547, light industry level,criteria A
Compliance to EN61000-4-2,3,4,5,6,8,11;EN61547, light industry level,criteria A 643.6Khrs min.MIL-HDBK-217F (25C) 643.6Khrs min.MIL-HDBK-217F (25C)
643.6Khrs min.MIL-HDBK-217F (25C) 148.5*38.5*28mm (L*W*H) 148.5*38.5*28mm (L*W*H)
148.5*38.5*28mm (L*W*H) 0.18Kg; 60pcs/12.8Kg/0.9CUFT 0.18Kg; 60pcs/12.8Kg/0.9CUFT
0.18Kg; 60pcs/12.8Kg/0.9CUFTNOTE NOTE
NOTE 1. All parameters NOT speciallymentioned are measured at 230VAC input, ratedload and 25C of ambient temperature. 1. All parameters NOT speciallymentioned are measured at 230VAC input, ratedload and 25C of ambient temperature.
1. All parameters NOT speciallymentioned are measured at 230VAC input, ratedload and 25C of ambient temperature. 2. Ripple & noiseare measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 2. Ripple & noiseare measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
2. Ripple & noiseare measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes setup tolerance, line regulation and load regulation. 3. Tolerance : includes setup tolerance, line regulation and load regulation.
3. Tolerance : includes setup tolerance, line regulation and load regulation. 4. Deratingmay be needed underlow input voltage,please checkthe static characteristic for more details. 4. Deratingmay be needed underlow input voltage,please checkthe static characteristic for more details.
4. Deratingmay be needed underlow input voltage,please checkthe static characteristic for more details. 5. Please refer to "DRIVING METHODS OF LED MODULE". 5. Please refer to "DRIVING METHODS OF LED MODULE".
5. Please refer to "DRIVING METHODS OF LED MODULE". 6. The powersupply is considered as a component that will be operated in combination with final equipment. SinceEMC performance will be affected by the complete installation,the final equipment manufacturers must re-qualify EMC Directive on the complete installationagain. 6. The powersupply is considered as a component that will be operated in combination with final equipment. SinceEMC performance will be affected by the complete installation,the final equipment manufacturers must re-qualify EMC Directive on the complete installationagain.
6. The powersupply is considered as a component that will be operated in combination with final equipment. SinceEMC performance will be affected by the complete installation,the final equipment manufacturers must re-qualify EMC Directive on the complete installationagain. 7. Direct connecting to LEDs is suggested, but is not suitable for using additionaldrivers. 7. Direct connecting to LEDs is suggested, but is not suitable for using additionaldrivers.
7. Direct connecting to LEDs is suggested, but is not suitable for using additionaldrivers. 8. To fulfill requirements of the latestErP regulation for lighting fixtures, this LED powersupply canonly be used behinda switch without permanently connected to the mains. 8. To fulfill requirements of the latestErP regulation for lighting fixtures, this LED powersupply canonly be used behinda switch without permanently connected to the mains.
8. To fulfill requirements of the latestErP regulation for lighting fixtures, this LED powersupply canonly be used behinda switch without permanently connected to the mains.File Name:PLN-20-SPEC2015-05-28 File Name:PLN-20-SPEC2015-05-28
File Name:PLN-20-SPEC2015-05-28

Datasheet - PDF

Title:Language:Size:Type:
pdf-Input: 90-264 AC / 127-392 DC, Output: 1, V1: 24, A1: 0,8 - MEANWELL - PLN-20-24 - PLN2024English147 Kbytespdf-Input: 90-264 AC / 127-392 DC, Output: 1, V1: 24, A1: 0,8 - MEANWELL - PLN-20-24 - PLN2024

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review
Have you got any questions?

If you have any questions, you can visit the following links or contact us via email

Please wait





* Required fields

or