LPF-60-20 MEANWELL AC-DC Single output LED driver Mix mode (CV+CC), Output 20VDC / 3A, cable output

40 W Single Output switching Power supply 40 W Single Output switching Power supply
40 W Single Output switching Power supply LPF-40series LPF-40series
LPF-40series F F
FSPECIFICATION SPECIFICATION
SPECIFICATION110 110
110M MSELV IP67 M MSELV IP67
M MSELV IP67 Features : Features :
Features : UniversalAC input / Full range (up to 305VAC) UniversalAC input / Full range (up to 305VAC)
UniversalAC input / Full range (up to 305VAC) Built-in active PFC function Built-in active PFC function
Built-in active PFC function High efficiency, up to 90% High efficiency, up to 90%
High efficiency, up to 90% Protections: short circuit / Over current/ Over voltage/ Over temperature Protections: short circuit / Over current/ Over voltage/ Over temperature
Protections: short circuit / Over current/ Over voltage/ Over temperature Cooling by free air convection Cooling by free air convection
Cooling by free air convection Fully isolated plastic case Fully isolated plastic case
Fully isolated plastic case Fully encapsulated with IP67 level (Note.6) Fully encapsulated with IP67 level (Note.6)
Fully encapsulated with IP67 level (Note.6) Classpower unit, no FG Classpower unit, no FG
Classpower unit, no FG Class 2 power unit Class 2 power unit
Class 2 power unit Suitable for LED lighting and moving sign applications Suitable for LED lighting and moving sign applications
Suitable for LED lighting and moving sign applications The fulfillment of all the world safetyregulations for the lighting The fulfillment of all the world safetyregulations for the lighting
The fulfillment of all the world safetyregulations for the lighting Suitable for dry / damp/ wet locations Suitable for dry / damp/ wet locations
Suitable for dry / damp/ wet locations 5 years warranty 5 years warranty
5 years warranty( for 48V,54V only) ( except for 48V,54V ) ( for 48V,54V only) ( except for 48V,54V )
( for 48V,54V only) ( except for 48V,54V ) MODEL MODEL
MODEL LPF-40-12LPF-40-15LPF-40-20LPF-40-24LPF-40-30LPF-40-36LPF-40-42LPF-40-48LPF-40-54 LPF-40-12LPF-40-15LPF-40-20LPF-40-24LPF-40-30LPF-40-36LPF-40-42LPF-40-48LPF-40-54
LPF-40-12LPF-40-15LPF-40-20LPF-40-24LPF-40-30LPF-40-36LPF-40-42LPF-40-48LPF-40-54 THE DC VOLTAGE THE DC VOLTAGE
THE DC VOLTAGE 12V 12V
12V 15V 15V
15V 20V 20V
20V 24V 24V
24V 30V 30V
30V 36V 36V
36V 42V 42V
42V 48V 48V
48V 54V 54V
54V CONSTANT CURRENT REGION Note.4 7.2 ~12V CONSTANT CURRENT REGION Note.4 7.2 ~12V
CONSTANT CURRENT REGION Note.4 7.2 ~12V 9 ~ 15V 9 ~ 15V
9 ~ 15V 12 ~ 20V 12 ~ 20V
12 ~ 20V 14.4 ~ 24V 14.4 ~ 24V
14.4 ~ 24V 18 ~ 30V 18 ~ 30V
18 ~ 30V 21.6 ~ 36V 21.6 ~ 36V
21.6 ~ 36V 25.2 ~ 42V 25.2 ~ 42V
25.2 ~ 42V 28.8 ~ 48V 28.8 ~ 48V
28.8 ~ 48V 32.4 ~ 54V 32.4 ~ 54V
32.4 ~ 54V NOMINAL CURRENT NOMINAL POWER NOMINAL CURRENT NOMINAL POWER
NOMINAL CURRENT NOMINAL POWER 3.34A2.67A2A1.67A1.34A1.12A 3.34A2.67A2A1.67A1.34A1.12A
3.34A2.67A2A1.67A1.34A1.12A 40.08 W 40.08 W 40W40.08W 40.2 W 40.32 W 40.08 W 40.08 W 40W40.08W 40.2 W 40.32 W
40.08 W 40.08 W 40W40.08W 40.2 W 40.32 W 0.96 A 0.96 A
0.96 A 40.32 W 40.32 W
40.32 W 0.84 A 0.84 A
0.84 A 40.32 W 40.32 W
40.32 W 0.76 A 0.76 A
0.76 A 41.04 W 41.04 W
41.04 WOUTPUT OUTPUT
OUTPUT RIPPLE & NOISE (max.) Note.2150mVp-p 150mVp-p 150mVp-p 150mVp-p 200mVp-p 250mVp-p RIPPLE & NOISE (max.) Note.2150mVp-p 150mVp-p 150mVp-p 150mVp-p 200mVp-p 250mVp-p
RIPPLE & NOISE (max.) Note.2150mVp-p 150mVp-p 150mVp-p 150mVp-p 200mVp-p 250mVp-p VOLTAGE TOLERANCE Note.34.0% 4.0% 4.0% 4.0% 4.0% 4.0% VOLTAGE TOLERANCE Note.34.0% 4.0% 4.0% 4.0% 4.0% 4.0%
VOLTAGE TOLERANCE Note.34.0% 4.0% 4.0% 4.0% 4.0% 4.0% 250mVp-p 250mVp-p
250mVp-p 4.0% 4.0%
4.0% 250mVp-p 250mVp-p
250mVp-p 4.0% 4.0%
4.0% 350mVp-p 350mVp-p
350mVp-p 4.0% 4.0%
4.0% LINE REGULATION LOAD REGULATION LINE REGULATION LOAD REGULATION
LINE REGULATION LOAD REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5%
0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 2.0% 1.5% 1.0% 0.5% 0.5% 0.5% 2.0% 1.5% 1.0% 0.5% 0.5% 0.5%
2.0% 1.5% 1.0% 0.5% 0.5% 0.5% 0.5% 0.5%
0.5% 0.5% 0.5%
0.5% 0.5% 0.5%
0.5% 0.5% 0.5%
0.5% 0.5% 0.5%
0.5% 0.5% 0.5%
0.5% SETUP, RISE TIME Note.71000ms, 80ms / 115VAC at full load 500ms, 80ms / 230VAC SETUP, RISE TIME Note.71000ms, 80ms / 115VAC at full load 500ms, 80ms / 230VAC
SETUP, RISE TIME Note.71000ms, 80ms / 115VAC at full load 500ms, 80ms / 230VAC HOLD TIME (Typ.) HOLD TIME (Typ.)
HOLD TIME (Typ.) 16ms/230VAC16ms/115VAC at full load 16ms/230VAC16ms/115VAC at full load
16ms/230VAC16ms/115VAC at full load VOLTAGE RANGE Note.5 90 ~ 305VAC127 ~ 431VDC VOLTAGE RANGE Note.5 90 ~ 305VAC127 ~ 431VDC
VOLTAGE RANGE Note.5 90 ~ 305VAC127 ~ 431VDC FREQUENCY RANGE POWER FACTOR (Typ.) FREQUENCY RANGE POWER FACTOR (Typ.)
FREQUENCY RANGE POWER FACTOR (Typ.) TOTAL HARMONIC DISTORTION TOTAL HARMONIC DISTORTION
TOTAL HARMONIC DISTORTION 47 ~ 63Hz 47 ~ 63Hz
47 ~ 63Hz PF>0.97/115VAC, PF>0.95/230VAC, PF>0.92/277VAC at full load (please refer to "Power Factor Characteristic" curve) THD< 20% when output loading60% at 115VAC/230VAC input and output loading75% at 277VAC input PF>0.97/115VAC, PF>0.95/230VAC, PF>0.92/277VAC at full load (please refer to "Power Factor Characteristic" curve) THD< 20% when output loading60% at 115VAC/230VAC input and output loading75% at 277VAC input
PF>0.97/115VAC, PF>0.95/230VAC, PF>0.92/277VAC at full load (please refer to "Power Factor Characteristic" curve) THD< 20% when output loading60% at 115VAC/230VAC input and output loading75% at 277VAC input INPUT INPUT
INPUT EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) MAX. No. of the systems of power in the 16TH EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) MAX. No. of the systems of power in the 16TH
EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) MAX. No. of the systems of power in the 16TH CIRCUIT BREAKER CIRCUIT BREAKER
CIRCUIT BREAKER THE LEAKAGE CURRENT THE LEAKAGE CURRENT
THE LEAKAGE CURRENT 84% 85% 86% 87% 88% 88% 84% 85% 86% 87% 88% 88%
84% 85% 86% 87% 88% 88% 0.6 A / 115VAC0.3A / 230VAC0.25A/277VAC 0.6 A / 115VAC0.3A / 230VAC0.25A/277VAC
0.6 A / 115VAC0.3A / 230VAC0.25A/277VAC COLD start 50A(twidth=210s measured at 50% Ipeak) at 230VAC COLD start 50A(twidth=210s measured at 50% Ipeak) at 230VAC
COLD start 50A(twidth=210s measured at 50% Ipeak) at 230VAC12 units (circuit breaker type B) / 20 units (circuit breaker type C) 230VAC 12 units (circuit breaker type B) / 20 units (circuit breaker type C) 230VAC
12 units (circuit breaker type B) / 20 units (circuit breaker type C) at 230vac<0.75 mA / 240VAC <0.75 mA / 240VAC
<0.75 mA / 240VAC 88.5% 88.5%
88.5% 90% 90%
90% 90% 90%
90% MOST of CURRENTNote.4 95 ~ 108% MOST of CURRENTNote.4 95 ~ 108%
MOST of CURRENTNote.4 95 ~ 108% Protection type : Constant current limiting, recovers automatically after fault condition is removed Protection type : Constant current limiting, recovers automatically after fault condition is removed
Protection type : Constant current limiting, recovers automatically after fault condition is removed SHORT CIRCUITHiccup mode, recovers automatically after fault condition is removed. SHORT CIRCUITHiccup mode, recovers automatically after fault condition is removed.
SHORT CIRCUITHiccup mode, recovers automatically after fault condition is removed. PROTECTION PROTECTION
PROTECTIONENVIRONMENT ENVIRONMENT
ENVIRONMENTOVER VOLTAGE OVER VOLTAGE
MOST OF VOLTAGEOVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY THE OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY
THE OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY STORAGE TEMP., The MOISTURE STORAGE TEMP., The MOISTURE
STORAGE TEMP., The MOISTURE TEMP. COEFFICIENT VIBRATION TEMP. COEFFICIENT VIBRATION
TEMP. COEFFICIENT VIBRATION 15 ~ 17V 17.5 ~ 21V23 ~ 27V 28 ~ 35V 34 ~ 40V 41 ~ 49V Protection type : Shut down and latch off o/p voltage, re-power on to recover 15 ~ 17V 17.5 ~ 21V23 ~ 27V 28 ~ 35V 34 ~ 40V 41 ~ 49V Protection type : Shut down and latch off o/p voltage, re-power on to recover
15 ~ 17V 17.5 ~ 21V23 ~ 27V 28 ~ 35V 34 ~ 40V 41 ~ 49V Protection type : Shut down and latch off o/p voltage, re-power on to recover Shut down o/p voltage, re-power on to recover Shut down o/p voltage, re-power on to recover
Shut down o/p voltage, re-power on to recover -40 ~ +70C (Refer to "Reduction Curve") -40 ~ +70C (Refer to "Reduction Curve")
-40 ~ +70C (Refer to "Reduction Curve") 20 ~ 95% RH non-condensing 20 ~ 95% RH non-condensing
20 ~ 95% RH non-condensing -40 ~ +80C, 10 ~ 95% RH -40 ~ +80C, 10 ~ 95% RH
-40 ~ +80C, 10 ~ 95% RH 0.03%/C (0 ~ 50 ° C) 0.03%/C (0 ~ 50 ° C)
0.03%/C (0 ~ 50 ° C) 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, y, Z axes 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, y, Z axes
10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, y, Z axes 46 ~ 54V 46 ~ 54V
46 ~ 54V 54 ~ 63V 54 ~ 63V
54 ~ 63V 59 ~ 66V 59 ~ 66V
59 ~ 66VSAFETY & SECURITY and
SECURITY and UL8750, CSA C22.2 No. 250.0-08(except for 48V, 54V), ENEC EN61347-1, EN61347-2-13 independent, EN62384, IP67, UL8750, CSA C22.2 No. 250.0-08(except for 48V, 54V), ENEC EN61347-1, EN61347-2-13 independent, EN62384, IP67,
UL8750, CSA C22.2 No. 250.0-08(except for 48V, 54V), ENEC EN61347-1, EN61347-2-13 independent, EN62384, IP67, STANDARDS of SAFETY of the Note.6 J61347-1, J61347-2-13 approved ; design refer to UL60950-1, TUV EN60950-1 STANDARDS of SAFETY of the Note.6 J61347-1, J61347-2-13 approved ; design refer to UL60950-1, TUV EN60950-1
STANDARDS of SAFETY of the Note.6 J61347-1, J61347-2-13 approved ; design refer to UL60950-1, TUV EN60950-1 WITHSTAND VOLTAGEI/P-O/P:3.75 KVAC WITHSTAND VOLTAGEI/P-O/P:3.75 KVAC
WITHSTAND VOLTAGEI/P-O/P:3.75 KVAC EMC EMC
EMCOTHERS OTHER
OTHER INSULATION RESISTANCE INSULATION RESISTANCE
INSULATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF DIMENSION EMC EMISSION EMC IMMUNITY MTBF DIMENSION
EMC EMISSION EMC IMMUNITY MTBF DIMENSION PACKAGING PACKAGING
PACKAGING I/P-O/P:100M Ohms / 500VDC / 25C/ 70% RH I/P-O/P:100M Ohms / 500VDC / 25C/ 70% RH
I/P-O/P:100M Ohms / 500VDC / 25C/ 70% RH Compliance to EN55015, EN61000-3-2 Class C (60% load) ; EN61000-3-3 Compliance to EN55015, EN61000-3-2 Class C (60% load) ; EN61000-3-3
Compliance to EN55015, EN61000-3-2 Class C (60% load) ; EN61000-3-3 Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, EN55024, light industry level(surge 2KV), criteria A Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, EN55024, light industry level(surge 2KV), criteria A
Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, EN55024, light industry level(surge 2KV), criteria A 438.8 Khrs min.MIL-HDBK-217F (25C) 438.8 Khrs min.MIL-HDBK-217F (25C)
438.8 Khrs min.MIL-HDBK-217F (25C) 162.5*43*32 mm (L*W*H) 162.5*43*32 mm (L*W*H)
162.5*43*32 mm (L*W*H) 0.44 Kg; 32pcs/15.08 Kg/0.93 CUFT 0.44 Kg; 32pcs/15.08 Kg/0.93 CUFT
0.44 Kg; 32pcs/15.08 Kg/0.93 CUFT NOTE NOTE
NOTE 1. All the parameters are NOT speciallymentioned are measured at 230vac input, ratedload and 25 ° C ambient temperature. 1. All the parameters are NOT speciallymentioned are measured at 230vac input, ratedload and 25 ° C ambient temperature.
1. All the parameters are NOT speciallymentioned are measured at 230vac input, ratedload and 25 ° C ambient temperature. 2. Curly and noiseare measured at 20 mhz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 2. Curly and noiseare measured at 20 mhz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.
2. Curly and noiseare measured at 20 mhz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 3. Tolerance : includes setup tolerance, line regulation and load regulation. 3. Tolerance : includes setup tolerance, line regulation and load regulation.
3. Tolerance : includes setup tolerance, line regulation and load regulation. 4. Please refer to "DRIVING METHODS OF LED MODULE". 4. Please refer to "DRIVING METHODS OF LED MODULE".
4. Please refer to "DRIVING METHODS OF LED MODULE". 5. Deratingmay be necessary underlow input voltages. Please checkthe static characteristics for more details. 5. Deratingmay be necessary underlow input voltages. Please checkthe static characteristics for more details.
5. Deratingmay be necessary underlow input voltages. Please checkthe static characteristics for more details. 6. Suitable for indoor useor outdoorusewithout direct sunlightexposure. Please avoid immerse in the waterover 30 minutes. 6. Suitable for indoor useor outdoorusewithout direct sunlightexposure. Please avoid immerse in the waterover 30 minutes.
6. Suitable for indoor useor outdoorusewithout direct sunlightexposure. Please avoid immerse in the waterover 30 minutes. 7. Lengthof setting time is measured at cold first start.Turn on/OFF the supply can lead to the increase of the setup time. 7. Lengthof setting time is measured at cold first start.Turn on/OFF the supply can lead to the increase of the setup time.
7. Lengthof setting time is measured at cold first start.Turn on/OFF the supply can lead to the increase of the setup time. 8. The supply is considered a component which will be operated in combination with final equipment. SinceEMC the performance will be affected by the complete installation,the final equipment manufacturers must re-qualify EMC Directive on the complete installationagain. 8. The supply is considered a component which will be operated in combination with final equipment. SinceEMC the performance will be affected by the complete installation,the final equipment manufacturers must re-qualify EMC Directive on the complete installationagain.
8. The supply is considered a component which will be operated in combination with final equipment. SinceEMC the performance will be affected by the complete installation,the final equipment manufacturers must re-qualify EMC Directive on the complete installationagain. 9. To comply with the requirements of the latestErP regulation of the luminaires, LED supply you canonly be used behinda switch without permanently connected to the electrical grid. 9. To comply with the requirements of the latestErP regulation of the luminaires, LED supply you canonly be used behinda switch without permanently connected to the electrical grid.
9. To comply with the requirements of the latestErP regulation of the luminaires, LED supply you canonly be used behinda switch without permanently connected to the electrical grid. File name:LPF-40-SPEC2015-05-28 File name:LPF-40-SPEC2015-05-28
File name:LPF-40-SPEC2015-05-28