USP-500-5 MEANWELL AC-DC Single output power supply, Output 5VDC / 80A, U-bracket low profile format 41mm, O..

5 0 0 W S i n g l e O u t p u t w i t h P F C F u n c t i o n 5 0 0 W S i n g l e O u t p u t w i t h P F C F u n c t i o n
5 0 0 W S i n g l e O u t p u t w i t h P F C F u n c t i o n Features : Features :
Features : U S P - 5 0 0 s e r i e s U S P - 5 0 0 s e r i e s
U S P - 5 0 0 s e r i e s EUniversal AC input / Full range EUniversal AC input / Full range
EUniversal AC input / Full range EBuilt-in active PFC circuit compliance to EN61000-3-2 EBuilt-in active PFC circuit compliance to EN61000-3-2
EBuilt-in active PFC circuit compliance to EN61000-3-2 EProtections: short circuit/ Overload / Over voltage/ Over temperature EProtections: short circuit/ Overload / Over voltage/ Over temperature
EProtections: short circuit/ Overload / Over voltage/ Over temperature EFree air convection for 400W and 500W with 23.5 CFM forced air EFree air convection for 400W and 500W with 23.5 CFM forced air
EFree air convection for 400W and 500W with 23.5 CFM forced air EHigh power density 6.2 w/in3 EHigh power density 6.2 w/in3
EHigh power density 6.2 w/in3 EAC input active surge current limiting EAC input active surge current limiting
EAC input active surge current limiting Of the EU-bracket low profile:41mm Of the EU-bracket low profile:41mm
Of the EU-bracket low profile:41mm ECurrent sharing(1+1) for 24V and 48V models(Optional) ECurrent sharing(1+1) for 24V and 48V models(Optional)
ECurrent sharing(1+1) for 24V and 48V models(Optional) EBuilt remote ON-OFF control EBuilt remote ON-OFF control
EBuilt remote ON-OFF control EBuilt remote sense function EBuilt remote sense function
EBuilt remote sense function EBuilt-in DC OK active signal EBuilt-in DC OK active signal
EBuilt-in DC OK active signalSPECIFICATION SPECIFICATION
SPECIFICATION MODEL MODEL
MODEL E3 years warranty .. E3 years warranty ..
E3 years warranty ..USP-500-5 USP-500-12 USP-500-15 USP-500-24 USP-500-48 USP-500-5 USP-500-12 USP-500-15 USP-500-24 USP-500-48
USP-500-5 USP-500-12 USP-500-15 USP-500-24 USP-500-48 DC VOLTAGE RATED CURRENT DC VOLTAGE RATED CURRENT
DC VOLTAGE RATED CURRENT 5V 5V
5V 80A 80A
80A 12V 12V
12V 42A 42A
42A 15V 15V
15V 33.5 A 33.5 A
33.5 A 24V 24V
24V 21A 21A
21A 48V 48V
48V 10.5 A 10.5 A
10.5 A CURRENT RANGE (convection) 0 - 60A CURRENT RANGE (convection) 0 - 60A
CURRENT RANGE (convection) 0 - 60A CURRENT RANGE (23.5 CFM FAN) 0 - 80A CURRENT RANGE (23.5 CFM FAN) 0 - 80A
CURRENT RANGE (23.5 CFM FAN) 0 - 80A 0 - 33A 0 - 33A
0 - 33A 0 - 42A 0 - 42A
0 - 42A 0 - 27A 0 - 27A
0 - 27A 0 - 33.5 A 0 - 33.5 A
0 - 33.5 A 0 - 17A 0 - 17A
0 - 17A 0 - 21A 0 - 21A
0 - 21A 0 - 8.5 A 0 - 8.5 A
0 - 8.5 A 0 - 10.5 A 0 - 10.5 A
0 - 10.5 A RATED POWER (convection) RATED POWER (convection)
RATED POWER (convection) 300W 300W
300W 396W 396W
396W 405W 405W
405W 408W 408W
408W 408W 408W
408WOUTPUT OUTPUT
OUTPUT RATED POWER (23.5 CFM FAN) 400W RATED POWER (23.5 CFM FAN) 400W
RATED POWER (23.5 CFM FAN) 400W RIPPLE & NOISE (max.) Note.280mVp-p RIPPLE & NOISE (max.) Note.280mVp-p
RIPPLE & NOISE (max.) Note.280mVp-p 504W 504W
504W 100mVp-p 100mVp-p
100mVp-p 502.5 W 502.5 W
502.5 W 100mVp-p 100mVp-p
100mVp-p 504W 504W
504W 150mVp-p 150mVp-p
150mVp-p 504W 504W
504W 150mVp-p 150mVp-p
150mVp-p VOLTAGE ADJ. RANGE of VOLTAGE ADJ. RANGE of
VOLTAGE ADJ. RANGE of 4.5 - 5.5 V 4.5 - 5.5 V
4.5 - 5.5 V 10.8 - 13.2 V 10.8 - 13.2 V
10.8 - 13.2 V 13.5 - 16.5 V 13.5 - 16.5 V
13.5 - 16.5 V 21.6 - 27V 21.6 - 27V
21.6 - 27V 43.2 - 52.8 V 43.2 - 52.8 V
43.2 - 52.8 V VOLTAGE TOLERANCE Note.32.0% VOLTAGE TOLERANCE Note.32.0%
VOLTAGE TOLERANCE Note.32.0% 2.0% 2.0% 2.0% 2.0% 2.0% 2.0% 2.0% 2.0%
2.0% 2.0% 2.0% 2.0% LINE REGULATION LINE REGULATION
LINE REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5%
0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION LOAD REGULATION
LOAD REGULATION 2.0% 2.0%
2.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0%
1.0% 1.0% 1.0% 1.0% SETUP, RISE TIME HOLD TIME (Typ.) SETUP, RISE TIME HOLD TIME (Typ.)
SETUP, RISE TIME HOLD TIME (Typ.) 1500ms, 80ms/230VAC 3100ms, 80ms/115VAC at full load 1500ms, 80ms/230VAC 3100ms, 80ms/115VAC at full load
1500ms, 80ms/230VAC 3100ms, 80ms/115VAC at full load 20ms/230VAC20ms/115VAC at full load 20ms/230VAC20ms/115VAC at full load
20ms/230VAC20ms/115VAC at full load VOLTAGE RANGE Note.5 90 - 264VAC127 - 370VDC VOLTAGE RANGE Note.5 90 - 264VAC127 - 370VDC
VOLTAGE RANGE Note.5 90 - 264VAC127 - 370VDC FREQUENCY RANGE POWER FACTOR (Typ.) FREQUENCY RANGE POWER FACTOR (Typ.)
FREQUENCY RANGE POWER FACTOR (Typ.) 47 - 63Hz 47 - 63Hz
47 - 63Hz 0.95/230VAC0.98/115VAC at full load 0.95/230VAC0.98/115VAC at full load
0.95/230VAC0.98/115VAC at full load INPUT INPUT
INPUT EFFICIENCY (Typ.) EFFICIENCY (Typ.)
EFFICIENCY (Typ.) 85% 85%
85% 90% 90%
90% 90%89%90% 90%89%90%
90%89%90% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) THE LEAKAGE CURRENT AC CURRENT (Typ.) INRUSH CURRENT (Typ.) THE LEAKAGE CURRENT
AC CURRENT (Typ.) INRUSH CURRENT (Typ.) THE LEAKAGE OF CURRENTOVERLOAD The OVERHEAD of
The OVERHEAD of 6A/115VAC2.6A/230VAC 6A/115VAC2.6A/230VAC
6A/115VAC2.6A/230VAC 30A/115VAC50A/230VAC 30A/115VAC50A/230VAC
30A/115VAC50A/230VAC <2mA / 240VAC <2mA / 240VAC
<2mA / 240VAC 105 - 130% rated output power 105 - 130% rated output power
105 - 130% rated output power Protection type : Constant current limiting, unit will shut down after 3 sec. ,re-power on to recover Protection type : Constant current limiting, unit will shut down after 3 sec. ,re-power on to recover
Protection type : Constant current limiting, unit will shut down after 3 sec. ,re-power on to recover 5.7 - 7V13.5 - 16V 5.7 - 7V13.5 - 16V
5.7 - 7V13.5 - 16V 17 - 21V 27.8 - 32.4 V 53 - 64.8 V 17 - 21V 27.8 - 32.4 V 53 - 64.8 V
17 - 21V 27.8 - 32.4 V 53 - 64.8 V PROTECTION PROTECTION
PROTECTION OVER VOLTAGE OVER VOLTAGE
OVER VOLTAGE THE EXCESS OF TEMPERATURE THE EXCESS OF TEMPERATURE
THE EXCESS OF TEMPERATURE Protection type : Shut down o/p voltage, re-power to recover Protection type : Shut down o/p voltage, re-power to recover
Protection type : Shut down o/p voltage, re-power to recover 85J5J (TSW1 : detect on heatsink of o/p diode) 85J5J (TSW1 : detect on heatsink of o/p diode)
85J5J (TSW1 : detect on heatsink of o/p diode) 95J5J(5V),100J(12V,15V,24V,48V) (TSW2 : detect on heatsink of power transistor) Protection type : Shut down o/p voltage with auto-recovery 95J5J(5V),100J(12V,15V,24V,48V) (TSW2 : detect on heatsink of power transistor) Protection type : Shut down o/p voltage with auto-recovery
95J5J(5V),100J(12V,15V,24V,48V) (TSW2 : detect on heatsink of power transistor) Protection type : Shut down o/p voltage with auto-recoveryFUNCTION The FUNCTION
The FUNCTION REMOTE ON/OFF CONTROLRC+/RC-: 0-0.8 V power on ; 4-10V power off REMOTE ON/OFF CONTROLRC+/RC-: 0-0.8 V power on ; 4-10V power off
REMOTE ON/OFF CONTROLRC+/RC-: 0-0.8 V power on ; 4-10V power offENVIRONMENT ENVIRONMENT
ENVIRONMENT SAFETY AND EMC SAFETY AND EMC
SAFETY AND EMC (Note 4) (Note 4)
(Note 4)OTHER OTHER
OTHER DC-OK SIGNAL DC-OK SIGNAL
DC-OK SIGNAL WORKING TEMP. OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION WORKING TEMP. OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION
WORKING TEMP. OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY STANDARDS
SAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION
VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF DIMENSION EMC IMMUNITY MTBF DIMENSION
EMC IMMUNITY MTBF DIMENSION PACKAGING PACKAGING
PACKAGING The psu turns on : 3.3 V - 5.6 V, power supply, power off: 0 - 1V The psu turns on : 3.3 V - 5.6 V, power supply, power off: 0 - 1V
The psu turns on : 3.3 V - 5.6 V, power supply, power off: 0 - 1V -20 - +70J (See "Reduction Curve") -20 - +70J (See "Reduction Curve")
-20 - +70J (See "Reduction Curve") 20% - 90% RH non-condensing 20% - 90% RH non-condensing
20% - 90% RH non-condensing -40 - +85J, 10% - 95% RH -40 - +85J, 10% - 95% RH
-40 - +85J, 10% - 95% RH 0.03%/J (0 - 50J) 0.03%/J (0 - 50J)
0.03%/J (0 - 50J) 10 - 500Hz, 2G 10min./1cycle, 60min. each along X, y, Z axes 10 - 500Hz, 2G 10min./1cycle, 60min. each along X, y, Z axes
10 - 500Hz, 2G 10min./1cycle, 60min. each along X, y, Z axes UL60950-1, TUV EN60950-1 approved UL60950-1, TUV EN60950-1 approved
UL60950-1, TUV EN60950-1 approved I/P-O/P:3KVAC I/P-FG:2KVACO/P-FG:0.5 KVAC I/P-O/P:3KVAC I/P-FG:2KVACO/P-FG:0.5 KVAC
I/P-O/P:3KVAC I/P-FG:2KVACO/P-FG:0.5 KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25J/ 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25J/ 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25J/ 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2, heavy industry level, criteria Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2, heavy industry level, criteria
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2, heavy industry level, criteria 129.8 K hrs min.MIL-HDBK-217F (25J) 129.8 K hrs min.MIL-HDBK-217F (25J)
129.8 K hrs min.MIL-HDBK-217F (25J) 254*127*41 mm (L*W*H) 254*127*41 mm (L*W*H)
254*127*41 mm (L*W*H) 1.6 Kg; 6pcs/10.6 Kg/0.7 CUFT 1.6 Kg; 6pcs/10.6 Kg/0.7 CUFT
1.6 Kg; 6pcs/10.6 Kg/0.7 CUFTNOTE NOTE
NOTE 1. All parameters NOT specially mentioned are measured at 230vac input, ratedloadand 25J of ambient temperature. 1. All parameters NOT specially mentioned are measured at 230vac input, ratedloadand 25J of ambient temperature.
1. All parameters NOT specially mentioned are measured at 230vac input, ratedloadand 25J of ambient temperature. 2. Ripple and noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 2. Ripple and noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.
2. Ripple and noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 3. Tolerance : includes set up tolerance, line regulation and load regulation.
3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets 4. The supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
4. The supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to "EMI testing of component powersupplies." (asavailable in http://www.meanwell.com) EMC directives. For guidance on how to perform these EMC tests, please refer to "EMI testing of component powersupplies." (asavailable in http://www.meanwell.com)
EMC directives. For guidance on how to perform these EMC tests, please refer to "EMI testing of component powersupplies." (asavailable in http://www.meanwell.com) 5. The reduction may be necessary underlow input voltages. Please, verify the reduction of the curve for more details. 5. The reduction may be necessary underlow input voltages. Please, verify the reduction of the curve for more details.
5. The reduction may be necessary underlow input voltages. Please, verify the reduction of the curve for more details.File name:USP-500-SPEC2012-11-12 File name:USP-500-SPEC2012-11-12
File name:USP-500-SPEC2012-11-12