5 0 0 W S i n g l e O u t p u t w i t h P F C F u n c t i o n
5 0 0 W S i n g l e O u t p u t w i t h P F C F u n c t i o n
5 0 0 W S i n g l e O u t p u t w i t h P F C F u n c t i o n Features :
Features :
Features :
U S P - 5 0 0 s e r i e s
U S P - 5 0 0 s e r i e s
U S P - 5 0 0 s e r i e s
EUniversal AC input / Full range
EUniversal AC input / Full range
EUniversal AC input / Full range
EBuilt-in active PFC circuit compliance to EN61000-3-2
EBuilt-in active PFC circuit compliance to EN61000-3-2
EBuilt-in active PFC circuit compliance to EN61000-3-2
EProtections: short circuit/ Overload / Over voltage/ Over temperature
EProtections: short circuit/ Overload / Over voltage/ Over temperature
EProtections: short circuit/ Overload / Over voltage/ Over temperature
EFree air convection for 400W and 500W with 23.5 CFM forced air
EFree air convection for 400W and 500W with 23.5 CFM forced air
EFree air convection for 400W and 500W with 23.5 CFM forced air
EHigh power density 6.2 w/in3
EHigh power density 6.2 w/in3
EHigh power density 6.2 w/in3
EAC input active surge current limiting
EAC input active surge current limiting
EAC input active surge current limiting
Of the EU-bracket low profile:41mm
Of the EU-bracket low profile:41mm
Of the EU-bracket low profile:41mm
ECurrent sharing(1+1) for 24V and 48V models(Optional)
ECurrent sharing(1+1) for 24V and 48V models(Optional)
ECurrent sharing(1+1) for 24V and 48V models(Optional)
EBuilt remote ON-OFF control
EBuilt remote ON-OFF control
EBuilt remote ON-OFF control
EBuilt remote sense function
EBuilt remote sense function
EBuilt remote sense function
EBuilt-in DC OK active signal
EBuilt-in DC OK active signal
EBuilt-in DC OK active signalSPECIFICATION
SPECIFICATION
SPECIFICATION
MODEL
MODEL
MODEL
E3 years warranty ..
E3 years warranty ..
E3 years warranty ..USP-500-5 USP-500-12 USP-500-15 USP-500-24 USP-500-48
USP-500-5 USP-500-12 USP-500-15 USP-500-24 USP-500-48
USP-500-5 USP-500-12 USP-500-15 USP-500-24 USP-500-48
DC VOLTAGE RATED CURRENT
DC VOLTAGE RATED CURRENT
DC VOLTAGE RATED CURRENT
5V
5V
5V
80A
80A
80A
12V
12V
12V
42A
42A
42A
15V
15V
15V
33.5 A
33.5 A
33.5 A
24V
24V
24V
21A
21A
21A
48V
48V
48V
10.5 A
10.5 A
10.5 A
CURRENT RANGE (convection) 0 - 60A
CURRENT RANGE (convection) 0 - 60A
CURRENT RANGE (convection) 0 - 60A
CURRENT RANGE (23.5 CFM FAN) 0 - 80A
CURRENT RANGE (23.5 CFM FAN) 0 - 80A
CURRENT RANGE (23.5 CFM FAN) 0 - 80A
0 - 33A
0 - 33A
0 - 33A
0 - 42A
0 - 42A
0 - 42A
0 - 27A
0 - 27A
0 - 27A
0 - 33.5 A
0 - 33.5 A
0 - 33.5 A
0 - 17A
0 - 17A
0 - 17A
0 - 21A
0 - 21A
0 - 21A
0 - 8.5 A
0 - 8.5 A
0 - 8.5 A
0 - 10.5 A
0 - 10.5 A
0 - 10.5 A
RATED POWER (convection)
RATED POWER (convection)
RATED POWER (convection)
300W
300W
300W
396W
396W
396W
405W
405W
405W
408W
408W
408W
408W
408W
408WOUTPUT
OUTPUT
OUTPUT
RATED POWER (23.5 CFM FAN) 400W
RATED POWER (23.5 CFM FAN) 400W
RATED POWER (23.5 CFM FAN) 400W
RIPPLE & NOISE (max.) Note.280mVp-p
RIPPLE & NOISE (max.) Note.280mVp-p
RIPPLE & NOISE (max.) Note.280mVp-p
504W
504W
504W
100mVp-p
100mVp-p
100mVp-p
502.5 W
502.5 W
502.5 W
100mVp-p
100mVp-p
100mVp-p
504W
504W
504W
150mVp-p
150mVp-p
150mVp-p
504W
504W
504W
150mVp-p
150mVp-p
150mVp-p
VOLTAGE ADJ. RANGE of
VOLTAGE ADJ. RANGE of
VOLTAGE ADJ. RANGE of
4.5 - 5.5 V
4.5 - 5.5 V
4.5 - 5.5 V
10.8 - 13.2 V
10.8 - 13.2 V
10.8 - 13.2 V
13.5 - 16.5 V
13.5 - 16.5 V
13.5 - 16.5 V
21.6 - 27V
21.6 - 27V
21.6 - 27V
43.2 - 52.8 V
43.2 - 52.8 V
43.2 - 52.8 V
VOLTAGE TOLERANCE Note.32.0%
VOLTAGE TOLERANCE Note.32.0%
VOLTAGE TOLERANCE Note.32.0%
2.0% 2.0% 2.0% 2.0%
2.0% 2.0% 2.0% 2.0%
2.0% 2.0% 2.0% 2.0%
LINE REGULATION
LINE REGULATION
LINE REGULATION
0.5% 0.5% 0.5% 0.5% 0.5%
0.5% 0.5% 0.5% 0.5% 0.5%
0.5% 0.5% 0.5% 0.5% 0.5%
LOAD REGULATION
LOAD REGULATION
LOAD REGULATION
2.0%
2.0%
2.0%
1.0% 1.0% 1.0% 1.0%
1.0% 1.0% 1.0% 1.0%
1.0% 1.0% 1.0% 1.0%
SETUP, RISE TIME HOLD TIME (Typ.)
SETUP, RISE TIME HOLD TIME (Typ.)
SETUP, RISE TIME HOLD TIME (Typ.)
1500ms, 80ms/230VAC 3100ms, 80ms/115VAC at full load
1500ms, 80ms/230VAC 3100ms, 80ms/115VAC at full load
1500ms, 80ms/230VAC 3100ms, 80ms/115VAC at full load
20ms/230VAC20ms/115VAC at full load
20ms/230VAC20ms/115VAC at full load
20ms/230VAC20ms/115VAC at full load
VOLTAGE RANGE Note.5 90 - 264VAC127 - 370VDC
VOLTAGE RANGE Note.5 90 - 264VAC127 - 370VDC
VOLTAGE RANGE Note.5 90 - 264VAC127 - 370VDC
FREQUENCY RANGE POWER FACTOR (Typ.)
FREQUENCY RANGE POWER FACTOR (Typ.)
FREQUENCY RANGE POWER FACTOR (Typ.)
47 - 63Hz
47 - 63Hz
47 - 63Hz
0.95/230VAC0.98/115VAC at full load
0.95/230VAC0.98/115VAC at full load
0.95/230VAC0.98/115VAC at full load
INPUT
INPUT
INPUT
EFFICIENCY (Typ.)
EFFICIENCY (Typ.)
EFFICIENCY (Typ.)
85%
85%
85%
90%
90%
90%
90%89%90%
90%89%90%
90%89%90%
AC CURRENT (Typ.) INRUSH CURRENT (Typ.) THE LEAKAGE CURRENT
AC CURRENT (Typ.) INRUSH CURRENT (Typ.) THE LEAKAGE CURRENT
AC CURRENT (Typ.) INRUSH CURRENT (Typ.) THE LEAKAGE OF CURRENTOVERLOAD
The OVERHEAD of
The OVERHEAD of
6A/115VAC2.6A/230VAC
6A/115VAC2.6A/230VAC
6A/115VAC2.6A/230VAC
30A/115VAC50A/230VAC
30A/115VAC50A/230VAC
30A/115VAC50A/230VAC
<2mA / 240VAC
<2mA / 240VAC
<2mA / 240VAC
105 - 130% rated output power
105 - 130% rated output power
105 - 130% rated output power
Protection type : Constant current limiting, unit will shut down after 3 sec. ,re-power on to recover
Protection type : Constant current limiting, unit will shut down after 3 sec. ,re-power on to recover
Protection type : Constant current limiting, unit will shut down after 3 sec. ,re-power on to recover
5.7 - 7V13.5 - 16V
5.7 - 7V13.5 - 16V
5.7 - 7V13.5 - 16V
17 - 21V 27.8 - 32.4 V 53 - 64.8 V
17 - 21V 27.8 - 32.4 V 53 - 64.8 V
17 - 21V 27.8 - 32.4 V 53 - 64.8 V
PROTECTION
PROTECTION
PROTECTION
OVER VOLTAGE
OVER VOLTAGE
OVER VOLTAGE
THE EXCESS OF TEMPERATURE
THE EXCESS OF TEMPERATURE
THE EXCESS OF TEMPERATURE
Protection type : Shut down o/p voltage, re-power to recover
Protection type : Shut down o/p voltage, re-power to recover
Protection type : Shut down o/p voltage, re-power to recover
85J5J (TSW1 : detect on heatsink of o/p diode)
85J5J (TSW1 : detect on heatsink of o/p diode)
85J5J (TSW1 : detect on heatsink of o/p diode)
95J5J(5V),100J(12V,15V,24V,48V) (TSW2 : detect on heatsink of power transistor) Protection type : Shut down o/p voltage with auto-recovery
95J5J(5V),100J(12V,15V,24V,48V) (TSW2 : detect on heatsink of power transistor) Protection type : Shut down o/p voltage with auto-recovery
95J5J(5V),100J(12V,15V,24V,48V) (TSW2 : detect on heatsink of power transistor) Protection type : Shut down o/p voltage with auto-recoveryFUNCTION
The FUNCTION
The FUNCTION
REMOTE ON/OFF CONTROLRC+/RC-: 0-0.8 V power on ; 4-10V power off
REMOTE ON/OFF CONTROLRC+/RC-: 0-0.8 V power on ; 4-10V power off
REMOTE ON/OFF CONTROLRC+/RC-: 0-0.8 V power on ; 4-10V power offENVIRONMENT
ENVIRONMENT
ENVIRONMENT
SAFETY AND EMC
SAFETY AND EMC
SAFETY AND EMC
(Note 4)
(Note 4)
(Note 4)OTHER
OTHER
OTHER
DC-OK SIGNAL
DC-OK SIGNAL
DC-OK SIGNAL
WORKING TEMP. OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION
WORKING TEMP. OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION
WORKING TEMP. OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION
SAFETY STANDARDS
SAFETY STANDARDS
SAFETY STANDARDS
VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION
VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION
VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION
EMC IMMUNITY MTBF DIMENSION
EMC IMMUNITY MTBF DIMENSION
EMC IMMUNITY MTBF DIMENSION
PACKAGING
PACKAGING
PACKAGING
The psu turns on : 3.3 V - 5.6 V, power supply, power off: 0 - 1V
The psu turns on : 3.3 V - 5.6 V, power supply, power off: 0 - 1V
The psu turns on : 3.3 V - 5.6 V, power supply, power off: 0 - 1V
-20 - +70J (See "Reduction Curve")
-20 - +70J (See "Reduction Curve")
-20 - +70J (See "Reduction Curve")
20% - 90% RH non-condensing
20% - 90% RH non-condensing
20% - 90% RH non-condensing
-40 - +85J, 10% - 95% RH
-40 - +85J, 10% - 95% RH
-40 - +85J, 10% - 95% RH
0.03%/J (0 - 50J)
0.03%/J (0 - 50J)
0.03%/J (0 - 50J)
10 - 500Hz, 2G 10min./1cycle, 60min. each along X, y, Z axes
10 - 500Hz, 2G 10min./1cycle, 60min. each along X, y, Z axes
10 - 500Hz, 2G 10min./1cycle, 60min. each along X, y, Z axes
UL60950-1, TUV EN60950-1 approved
UL60950-1, TUV EN60950-1 approved
UL60950-1, TUV EN60950-1 approved
I/P-O/P:3KVAC I/P-FG:2KVACO/P-FG:0.5 KVAC
I/P-O/P:3KVAC I/P-FG:2KVACO/P-FG:0.5 KVAC
I/P-O/P:3KVAC I/P-FG:2KVACO/P-FG:0.5 KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25J/ 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25J/ 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25J/ 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2, heavy industry level, criteria
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2, heavy industry level, criteria
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2, heavy industry level, criteria
129.8 K hrs min.MIL-HDBK-217F (25J)
129.8 K hrs min.MIL-HDBK-217F (25J)
129.8 K hrs min.MIL-HDBK-217F (25J)
254*127*41 mm (L*W*H)
254*127*41 mm (L*W*H)
254*127*41 mm (L*W*H)
1.6 Kg; 6pcs/10.6 Kg/0.7 CUFT
1.6 Kg; 6pcs/10.6 Kg/0.7 CUFT
1.6 Kg; 6pcs/10.6 Kg/0.7 CUFTNOTE
NOTE
NOTE
1. All parameters NOT specially mentioned are measured at 230vac input, ratedloadand 25J of ambient temperature.
1. All parameters NOT specially mentioned are measured at 230vac input, ratedloadand 25J of ambient temperature.
1. All parameters NOT specially mentioned are measured at 230vac input, ratedloadand 25J of ambient temperature.
2. Ripple and noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.
2. Ripple and noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.
2. Ripple and noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
4. The supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
4. The supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives. For guidance on how to perform these EMC tests, please refer to "EMI testing of component powersupplies." (asavailable in http://www.meanwell.com)
EMC directives. For guidance on how to perform these EMC tests, please refer to "EMI testing of component powersupplies." (asavailable in http://www.meanwell.com)
EMC directives. For guidance on how to perform these EMC tests, please refer to "EMI testing of component powersupplies." (asavailable in http://www.meanwell.com)
5. The reduction may be necessary underlow input voltages. Please, verify the reduction of the curve for more details.
5. The reduction may be necessary underlow input voltages. Please, verify the reduction of the curve for more details.
5. The reduction may be necessary underlow input voltages. Please, verify the reduction of the curve for more details.File name:USP-500-SPEC2012-11-12
File name:USP-500-SPEC2012-11-12
File name:USP-500-SPEC2012-11-12