225 W Single Output with the Function of PFC
225 W Single Output with the Function of PFC
225 W Single Output with the Function of PFC
USP-225series
USP-225series
USP-225series
Features :
Features :
Features :
Universal AC input / Full range
Universal AC input / Full range
Universal AC input / Full range
Built in active PFC circuit compliance to EN61000-3-2
Built in active PFC circuit compliance to EN61000-3-2
Built in active PFC circuit compliance to EN61000-3-2
Protections:short circuit / Overload / Over voltage/ Over temperature
Protections:short circuit / Overload / Over voltage/ Over temperature
Protections:short circuit / Overload / Over voltage/ Over temperature
Free air convection for 150W and air forced convection for 225w
Free air convection for 150W and air forced convection for 225w
Free air convection for 150W and air forced convection for 225w
High power density4.7w/in3
High power density4.7w/in3
High power density4.7w/in3
Active AC surge currentlimiting
Active AC surge currentlimiting
Active AC surge currentlimiting
U-bracket low profile:38mm
U-bracket low profile:38mm
U-bracket low profile:38mm
3 years warranty
3 years warranty
3 years warranty
SPECIFICATION
SPECIFICATION
SPECIFICATION
MODEL
MODEL
MODEL
USP-225-3.3
USP-225-3.3
USP-225-3.3
..
..
..
USP-225-5 USP-225-12USP-225-15USP-225-24USP-225-48
USP-225-5 USP-225-12USP-225-15USP-225-24USP-225-48
USP-225-5 USP-225-12USP-225-15USP-225-24USP-225-48
DC VOLTAGE RATED CURRENT RANGE RATED POWER
DC VOLTAGE RATED CURRENT RANGE RATED POWER
DC VOLTAGE RATED CURRENT RANGE RATED POWER
3.3 V
3.3 V
3.3 V
40A
40A
40A
0 ~ 40
0 ~ 40
0 ~ 40
132W
132W
132W
5V
5V
5V
40A
40A
40A
0 ~ 40
0 ~ 40
0 ~ 40
200W
200W
200W
12V
12V
12V
18.7 A
18.7 A
18.7 A
0 ~ 18.7 A
0 ~ 18.7 A
0 ~ 18.7 A
224.4 W
224.4 W
224.4 W
15V
15V
15V
15A
15A
15A
0 ~ 15A
0 ~ 15A
0 ~ 15A
225 W
225 W
225 W
24V
24V
24V
9.4 A
9.4 A
9.4 A
0 ~ 9.4 A
0 ~ 9.4 A
0 ~ 9.4 A
225.6 W
225.6 W
225.6 W
48V
48V
48V
4.7 A
4.7 A
4.7 A
0 ~ 4.7 A
0 ~ 4.7 A
0 ~ 4.7 A
225.6 W
225.6 W
225.6 W
RIPPLE & NOISE (max.) Note.2100mVp-p
RIPPLE & NOISE (max.) Note.2100mVp-p
RIPPLE & NOISE (max.) Note.2100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
150mVp-p
150mVp-p
150mVp-p
250mVp-p
250mVp-p
250mVp-p
OUTPUT VOLTAGE ADJ. RANGE of
OUTPUT VOLTAGE ADJ. RANGE of
OUTPUT VOLTAGE ADJ. RANGE of
2.97 ~ 3.6 V
2.97 ~ 3.6 V
2.97 ~ 3.6 V
4.5 ~ 5.5 V
4.5 ~ 5.5 V
4.5 ~ 5.5 V
10.8 ~ 13.2 V
10.8 ~ 13.2 V
10.8 ~ 13.2 V
13.5 ~ 16.5 V
13.5 ~ 16.5 V
13.5 ~ 16.5 V
21.6 ~ 26.4 V
21.6 ~ 26.4 V
21.6 ~ 26.4 V
43.2 ~ 52.8 V
43.2 ~ 52.8 V
43.2 ~ 52.8 V
VOLTAGE TOLERANCE Note.32.0%
VOLTAGE TOLERANCE Note.32.0%
VOLTAGE TOLERANCE Note.32.0%
2.0%2.0%2.0%2.0%2.0%
2.0%2.0%2.0%2.0%2.0%
2.0%2.0%2.0%2.0%2.0%
LINE REGULATION LOAD REGULATION
LINE REGULATION LOAD REGULATION
LINE REGULATION LOAD REGULATION
0.5%
0.5%
0.5%
1.0%
1.0%
1.0%
0.5%0.5%0.5%0.5%0.5%
0.5%0.5%0.5%0.5%0.5%
0.5%0.5%0.5%0.5%0.5%
1.0%1.0%1.0%1.0%1.0%
1.0%1.0%1.0%1.0%1.0%
1.0%1.0%1.0%1.0%1.0%
SETUP, RISE TIME HOLD TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE
SETUP, RISE TIME HOLD TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE
SETUP, RISE TIME HOLD TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE
POWER FACTOR (Typ.)
POWER FACTOR (Typ.)
POWER FACTOR (Typ.)
500ms, 30ms/230VAC 1200ms, 30ms/115VAC at full load
500ms, 30ms/230VAC 1200ms, 30ms/115VAC at full load
500ms, 30ms/230VAC 1200ms, 30ms/115VAC at full load
22ms/230VAC22ms/115VAC at full load
22ms/230VAC22ms/115VAC at full load
22ms/230VAC22ms/115VAC at full load
90 ~ 264VAC127 ~ 370VDC
90 ~ 264VAC127 ~ 370VDC
90 ~ 264VAC127 ~ 370VDC
47 ~ 63Hz
47 ~ 63Hz
47 ~ 63Hz
PF>0.93/230VAC PF>0.97/115VAC at full load
PF>0.93/230VAC PF>0.97/115VAC at full load
PF>0.93/230VAC PF>0.97/115VAC at full loadINPUT
INPUT
INPUT
EFFICIENCY (Typ.)
EFFICIENCY (Typ.)
EFFICIENCY (Typ.)
AC POWER
AC POWER
AC CURRENT115VAC
115VAC
115VAC
72%
72%
72%
2.2
2.2
2.2
77%
77%
77%
3.3
3.3
3.3
83% 84% 85% 86%
83% 84% 85% 86%
83% 84% 85% 86%
(Typ.)
(Typ.)
(Typ.)
230VAC1.1A
230VAC1.1A
230VAC1.1A
1.6
1.6
1.6 APROTECTION
PROTECTION
PROTECTIONENVIRONMENT
ENVIRONMENT
ENVIRONMENT
SAFETY AND EMC
SAFETY AND EMC
SAFETY AND EMC
(Note 4)
(Note 4)
(Note 4)OTHER
OTHER
OTHER
INRUSH CURRENT (Typ.) THE LEAKAGE CURRENT
INRUSH CURRENT (Typ.) THE LEAKAGE CURRENT
INRUSH CURRENT (Typ.) THE LEAKAGE OF CURRENTOVERLOAD
The OVERHEAD of
OVERLOADOVER VOLTAGE
OVER VOLTAGE
MOST OF VOLTAGEOVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY
THE OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY
THE OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY
STORAGE TEMP., The MOISTURE
STORAGE TEMP., The MOISTURE
STORAGE TEMP., The MOISTURE
TEMP. COEFFICIENT VIBRATION
TEMP. COEFFICIENT VIBRATION
TEMP. COEFFICIENT VIBRATION
SAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION
SAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION
SAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION
EMC IMMUNITY
EMC IMMUNITY
EMC IMMUNITY
MTBF DIMENSION PACKING
MTBF DIMENSION PACKING
MTBF DIMENSION PACKING
15A/115VAC35A/230VAC
15A/115VAC35A/230VAC
15A/115VAC35A/230VAC
<3.5 mA / 240VAC
<3.5 mA / 240VAC
<3.5 mA / 240VAC
105 ~ 150% rated output power
105 ~ 150% rated output power
105 ~ 150% rated output power
Protection type : Constant current limiting, recovers automatically after fault condition is removed
Protection type : Constant current limiting, recovers automatically after fault condition is removed
Protection type : Constant current limiting, recovers automatically after fault condition is removed
3.6 ~ 4.4 V 5.5 ~ 7.4 V 13.2 ~ 16.3 V 16.5 ~ 20.2 26.4 V ~ 32.4 V 52.8 ~ 64.8 V Protection type : Shut down o/p voltage, re-power on to recover
3.6 ~ 4.4 V 5.5 ~ 7.4 V 13.2 ~ 16.3 V 16.5 ~ 20.2 26.4 V ~ 32.4 V 52.8 ~ 64.8 V Protection type : Shut down o/p voltage, re-power on to recover
3.6 ~ 4.4 V 5.5 ~ 7.4 V 13.2 ~ 16.3 V 16.5 ~ 20.2 26.4 V ~ 32.4 V 52.8 ~ 64.8 V Protection type : Shut down o/p voltage, re-power on to recover
Shut down o/p voltage, recovers automatically after temperature goes down
Shut down o/p voltage, recovers automatically after temperature goes down
Shut down o/p voltage, recovers automatically after temperature goes down
-20 ~ +65c (See "Reduction Curve")
-20 ~ +65c (See "Reduction Curve")
-20 ~ +65c (See "Reduction Curve")
20 ~ 90% RH non-condensing
20 ~ 90% RH non-condensing
20 ~ 90% RH non-condensing
-40 ~ +85℃, 10 ~ 95% RH
-40 ~ +85℃, 10 ~ 95% RH
-40 ~ +85℃, 10 ~ 95% RH
0.03%/c (0 ~ 50 ° c)
0.03%/c (0 ~ 50 ° c)
0.03%/c (0 ~ 50 ° c)
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, y, Z axes
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, y, Z axes
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, y, Z axes
UL60950-1, TUV EN60950-1 approved
UL60950-1, TUV EN60950-1 approved
UL60950-1, TUV EN60950-1 approved
I/P-O/P:3KVAC I/P-FG:2KVACO/P-FG:0.5 KVAC
I/P-O/P:3KVAC I/P-FG:2KVACO/P-FG:0.5 KVAC
I/P-O/P:3KVAC I/P-FG:2KVACO/P-FG:0.5 KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25c/ 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25c/ 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25c/ 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level,criteria A
Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level,criteria A
Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level,criteria A
220K hrs min.MIL-HDBK-217F (25c)
220K hrs min.MIL-HDBK-217F (25c)
220K hrs min.MIL-HDBK-217F (25c)
202*101.5*38 mm (L*W*H)
202*101.5*38 mm (L*W*H)
202*101.5*38 mm (L*W*H)
0.85 Kg; 16pcs/14.6 Kg/0.76 CUFT
0.85 Kg; 16pcs/14.6 Kg/0.76 CUFT
0.85 Kg; 16pcs/14.6 Kg/0.76 CUFT
NOTE
NOTE
NOTE
1. All the parameters are NOT speciallymentioned are measured at 230vac input, ratedload and 25 ° c ambient temperature.
1. All the parameters are NOT speciallymentioned are measured at 230vac input, ratedload and 25 ° c ambient temperature.
1. All the parameters are NOT speciallymentioned are measured at 230vac input, ratedload and 25 ° c ambient temperature.
2. Curly and noiseare measured at 20 mhz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.
2. Curly and noiseare measured at 20 mhz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.
2. Curly and noiseare measured at 20 mhz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.
3. Tolerance : includessetup tolerance, line regulation and load regulation.
3. Tolerance : includessetup tolerance, line regulation and load regulation.
3. Tolerance : includessetup tolerance, line regulation and load regulation.
4. The supply is considered a component which will be installedinto a final computer. The final equipment must be re-confirmed that it still meets
4. The supply is considered a component which will be installedinto a final computer. The final equipment must be re-confirmed that it still meets
4. The supply is considered a component which will be installedinto a final computer. The final equipment must be re-confirmed that it still meets
EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies." (available in http://www.meanwell.com)
EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies." (available in http://www.meanwell.com)
EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies." (available in http://www.meanwell.com)
File name:USP-225-SPEC2013-12-27
File name:USP-225-SPEC2013-12-27
File name:USP-225-SPEC2013-12-27