MSP-450-7.5 MEANWELL AC-DC Single output Medical Enclosed power supply, Output 7.5VDC / 60A, MOOP

4 5 0 W S i n g l e O u t p u t M e d i c a l Ty p e 4 5 0 W S i n g l e O u t p u t M e d i c a l Ty p e
4 5 0 W S i n g l e O u t p u t M e d i c a l Ty p e M S P - 4 5 0s e r i e s M S P - 4 5 0s e r i e s
M S P - 4 5 0s e r i e s SPECIFICATION SPECIFICATION
SPECIFICATION MODEL MODEL
MODEL DC VOLTAGE RATED CURRENT CURRENT RANGE DC VOLTAGE RATED CURRENT CURRENT RANGE
DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER RATED POWER
RATED POWER Features : Features :
Features : Universal AC input / Full range Universal AC input / Full range
Universal AC input / Full range Built-in active PFCfunction, PF>0.95 Built-in active PFCfunction, PF>0.95
Built-in active PFCfunction, PF>0.95 High efficiency up to 89.5% High efficiency up to 89.5%
High efficiency up to 89.5% Withstand 300VAC surge input for 5 seconds Withstand 300VAC surge input for 5 seconds
Withstand 300VAC surge input for 5 seconds Protections: short circuit / Overload / Over voltage / Over temperature Protections: short circuit / Overload / Over voltage / Over temperature
Protections: short circuit / Overload / Over voltage / Over temperature Built-in constant currentlimiting circuit Built-in constant currentlimiting circuit
Built-in constant currentlimiting circuit Medical safetyapproved (MOOP level) Medical safetyapproved (MOOP level)
Medical safetyapproved (MOOP level) Built-in cooling fan ON-OFFcontrol Built-in cooling fan ON-OFFcontrol
Built-in cooling fan ON-OFFcontrol Built-in DC OK signal Built-in DC OK signal
Built-in DC OK signal Built-in remote ON-OFF control Built-in remote ON-OFF control
Built-in remote ON-OFF control Stand by [email protected] Stand by [email protected]
Stand by [email protected] Built-in remote sense function Built-in remote sense function
Built-in remote sense function No load power consumption<0.6 W (Note.7) No load power consumption<0.6 W (Note.7)
No load power consumption<0.6 W (Note.7) 5 years warranty 5 years warranty
5 years warranty MSP-450-3.3 MSP-450-5 MSP-450-7.5 MSP-450-12MSP-450-15 MSP-450-24MSP-450-36MSP-450-48 MSP-450-3.3 MSP-450-5 MSP-450-7.5 MSP-450-12MSP-450-15 MSP-450-24MSP-450-36MSP-450-48
MSP-450-3.3 MSP-450-5 MSP-450-7.5 MSP-450-12MSP-450-15 MSP-450-24MSP-450-36MSP-450-48 3.3 V 5V 7.5 V 12V15V24V36V48V 3.3 V 5V 7.5 V 12V15V24V36V48V
3.3 V 5V 7.5 V 12V15V24V36V48V 90A 90A60A37.5A 30A18.8A 12.5 A 9.5 A 90A 90A60A37.5A 30A18.8A 12.5 A 9.5 A
90A 90A60A37.5A 30A18.8A 12.5 A 9.5 A 0 ~ 90A0 ~ 90A0 ~ 60A0 ~ 37.5 0 ~ 30A0 ~ 18.8 0 ~ 12.5 A 0 ~ 9.5 0 ~ 90A0 ~ 90A0 ~ 60A0 ~ 37.5 0 ~ 30A0 ~ 18.8 0 ~ 12.5 A 0 ~ 9.5
0 ~ 90A0 ~ 90A0 ~ 60A0 ~ 37.5 0 ~ 30A0 ~ 18.8 0 ~ 12.5 A 0 ~ 9.5 297W 450W 450W 450W 450W 451.2W450W 456W 297W 450W 450W 450W 450W 451.2W450W 456W
297W 450W 450W 450W 450W 451.2W450W 456W RIPPLE & NOISE (max.)Note.280mVp-p80mVp-p100mVp-p120mVp-p150mVp-p150mVp-p240mVp-p240mVp-p RIPPLE & NOISE (max.)Note.280mVp-p80mVp-p100mVp-p120mVp-p150mVp-p150mVp-p240mVp-p240mVp-p
RIPPLE & NOISE (max.)Note.280mVp-p80mVp-p100mVp-p120mVp-p150mVp-p150mVp-p240mVp-p240mVp-p OUTPUTVOLTAGE ADJ. RANGE of OUTPUTVOLTAGE ADJ. RANGE of
OUTPUTVOLTAGE ADJ. RANGE of 2.8 ~ 3.8V4.3 ~ 5.8V6.8 ~ 9V 10.2 ~ 13.8V13.5 ~ 18V 21.6 ~ 28.8V28.8 ~ 39.6V40.8 ~ 55.2 V 2.8 ~ 3.8V4.3 ~ 5.8V6.8 ~ 9V 10.2 ~ 13.8V13.5 ~ 18V 21.6 ~ 28.8V28.8 ~ 39.6V40.8 ~ 55.2 V
2.8 ~ 3.8V4.3 ~ 5.8V6.8 ~ 9V 10.2 ~ 13.8V13.5 ~ 18V 21.6 ~ 28.8V28.8 ~ 39.6V40.8 ~ 55.2 V VOLTAGE TOLERANCE Note.3 2.0% 2.0% 2.0% 1.0% 1.0% 1.0% 1.0% 1.0% VOLTAGE TOLERANCE Note.3 2.0% 2.0% 2.0% 1.0% 1.0% 1.0% 1.0% 1.0%
VOLTAGE TOLERANCE Note.3 2.0% 2.0% 2.0% 1.0% 1.0% 1.0% 1.0% 1.0% LINE REGULATION LOAD REGULATION SETUP, RISE TIME LINE REGULATION LOAD REGULATION SETUP, RISE TIME
LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD TIME (Typ.) HOLD TIME (Typ.)
HOLD TIME (Typ.) 0.5% 0.5% 0.5% 0.3% 0.3% 0.2% 0.2% 0.2% 0.5% 0.5% 0.5% 0.3% 0.3% 0.2% 0.2% 0.2%
0.5% 0.5% 0.5% 0.3% 0.3% 0.2% 0.2% 0.2% 1.0% 1.0% 1.0% 0.5% 0.5% 0.5% 0.5% 0.5% 1.0% 1.0% 1.0% 0.5% 0.5% 0.5% 0.5% 0.5%
1.0% 1.0% 1.0% 0.5% 0.5% 0.5% 0.5% 0.5% 10 00 m s 10 0m s/23 0VAC 25 00m s, 10 0ms /115VAC at full ad 10 00 m s 10 0m s/23 0VAC 25 00m s, 10 0ms /115VAC at full ad
10 00 m s 10 0m s/23 0VAC 25 00m s, 10 0ms /115VAC at full ad 16 ms /23 0VAC 16m s/115vac a t fu ll load 16 ms /23 0VAC 16m s/115vac a t fu ll load
16 ms /23 0VAC 16m s/115vac a t fu ll load VOLTAGE RANGENote.5 85 ~ 2 64VAC 12 0 ~ 370 VDC VOLTAGE RANGENote.5 85 ~ 2 64VAC 12 0 ~ 370 VDC
VOLTAGE RANGENote.5 85 ~ 2 64VAC 12 0 ~ 370 VDC FREQUENCY RANGE POWER FACTOR (Typ.) FREQUENCY RANGE POWER FACTOR (Typ.)
FREQUENCY RANGE POWER FACTOR (Typ.) 47 ~ 6 3Hz 47 ~ 6 3Hz
47 ~ 6 3Hz PF>0.9 5/2 30 VAC PF>0.9 9/115 VAC in ful l lo ad PF>0.9 5/2 30 VAC PF>0.9 9/115 VAC in ful l lo ad
PF>0.9 5/2 30 VAC PF>0.9 9/115 VAC in ful l lo ad INPUT INPUT
INPUT EFFICIENCY (Typ.) AC CURRENT (Typ.) EFFICIENCY (Typ.) AC CURRENT (Typ.)
EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) INRUSH CURRENT (Typ.)
INRUSH CURRENT (Typ.) 80%83% 80%83%
80%83% 5A/115 VAC 2.4 A/23 0VAC 5A/115 VAC 2.4 A/23 0VAC
5A/115 VAC 2.4 A/23 0VAC 35 A/11 5 V AC 70 A/230 VAC 35 A/11 5 V AC 70 A/230 VAC
35 A/11 5 V AC 70 A/230 VAC 86.5%88%89%88% 89%89.5% 86.5%88%89%88% 89%89.5%
86.5%88%89%88% 89%89.5% THE LEAKAGE CURRENT THE LEAKAGE CURRENT
THE LEAKAGE OF CURRENTOVERLOAD The OVERHEAD of
The OVERHEAD of Earth leakage current < 300A/264VAC , Touch leakage current < 100 a/264VAC Earth leakage current < 300A/264VAC , Touch leakage current < 100 a/264VAC
Earth leakage current < 300A/264VAC , Touch leakage current < 100 a/264VAC 10 5 ~ 135 % ra ted ou tput po we r 10 5 ~ 135 % ra ted ou tput po we r
10 5 ~ 135 % ra ted ou tput po we r Prote cti on typ e : With stan t curren t limi ting, reco ve rs a utom aticall and after fa ult co nditi is rem oved Prote cti on typ e : With stan t curren t limi ting, reco ve rs a utom aticall and after fa ult co nditi is rem oved
Prote cti on typ e : With stan t curren t limi ting, reco ve rs a utom aticall and after fa ult co nditi is rem oved PROTECTION PROTECTION
PROTECTIONOVER VOLTAGE OVER VOLTAGE
OVER VOLTAGE 3.96 ~ V 4.62 3.96 ~ V 4.62
3.96 ~ V 4.62 6 ~ 7V9.4 ~ 10.9V14.4 ~ 16.8V18.8 ~ 21.8V30 ~ 34.8 V 41.4 ~ 48.6V57.6 ~ 67.2 V 6 ~ 7V9.4 ~ 10.9V14.4 ~ 16.8V18.8 ~ 21.8V30 ~ 34.8 V 41.4 ~ 48.6V57.6 ~ 67.2 V
6 ~ 7V9.4 ~ 10.9V14.4 ~ 16.8V18.8 ~ 21.8V30 ~ 34.8 V 41.4 ~ 48.6V57.6 ~ 67.2 VOVER TEMPERATURE THE EXCESS OF TEMPERATURE
THE EXCESS OF TEMPERATURE Prote cti on typ e : Shu t wn o/p vol tage , re-p ower to re co ver Prote cti on typ e : Shu t wn o/p vol tage , re-p ower to re co ver
Prote cti on typ e : Shu t wn o/p vol tage , re-p ower to re co ver Shu t down o/p vo ltag e, re co vers au tom atic al ly afte r tem pe ra ture to go is do wn Shu t down o/p vo ltag e, re co vers au tom atic al ly afte r tem pe ra ture to go is do wn
Shu t down o/p vo ltag e, re co vers au tom atic al ly afte r tem pe ra ture to go is do wn 5V STANDBY 5VSB : [email protected] ; tolerance5%, ripple : 50mVp-p(max.) 5V STANDBY 5VSB : [email protected] ; tolerance5%, ripple : 50mVp-p(max.)
5V STANDBY 5VSB : [email protected] ; tolerance5%, ripple : 50mVp-p(max.)The FUNCTION The FUNCTION
The FUNCTION DC OK SIGNAL REMOTE CONTROL DC OK SIGNAL REMOTE CONTROL
DC OK SIGNAL REMOTE CONTROL The power source of your rn : 3.3 ~ 5 .6V ; power source of your rn, off : 0 ~ 1V The power source of your rn : 3.3 ~ 5 .6V ; power source of your rn, off : 0 ~ 1V
The power source of your rn : 3.3 ~ 5 .6V ; power source of your rn, off : 0 ~ 1V RC+ / RC-: 4 ~ 10V or open = power on, 0 ~ 0.8 V or short = power off RC+ / RC-: 4 ~ 10V or open = power on, 0 ~ 0.8 V or short = power off
RC+ / RC-: 4 ~ 10V or open = power on, 0 ~ 0.8 V or short = power off FAN CONTROL (Typ.) The ad 2010 % or RTH25 0 Fan FAN CONTROL (Typ.) The ad 2010 % or RTH25 0 Fan
FAN CONTROL (Typ.) The ad 2010 % or RTH25 0 Fan onENVIRONMENT ENVIRONMENT
ENVIRONMENT WORKING TEMP. OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION WORKING TEMP. OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION
WORKING TEMP. OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY STANDARDS
SAFETY STANDARDS -40 ~ +70 (Re fer t o "ra ting Re e") -40 ~ +70 (Re fer t o "ra ting Re e")
-40 ~ +70 (Re fer t o "ra ting Re e") 20 ~ 9 0% RH no n-co nde ns ing 20 ~ 9 0% RH no n-co nde ns ing
20 ~ 9 0% RH no n-co nde ns ing -40 ~ +85, 10 ~ 95 % RH -40 ~ +85, 10 ~ 95 % RH
-40 ~ +85, 10 ~ 95 % RH 0.03%/ (0 ~ 50) 0.03%/ (0 ~ 50)
0.03%/ (0 ~ 50) 10 ~ 5 00Hz , 5G 10 meters. /1cy cl e, 60m. ea ch alo ng X, y, Z ax is 10 ~ 5 00Hz , 5G 10 meters. /1cy cl e, 60m. ea ch alo ng X, y, Z ax is
10 ~ 5 00Hz , 5G 10 meters. /1cy cl e, 60m. ea ch alo ng X, y, Z ax is ANSI/AAMI ES60601-1, IEC60601-1 approved ANSI/AAMI ES60601-1, IEC60601-1 approved
ANSI/AAMI ES60601-1, IEC60601-1 approved ISO LATI ON WILL SEE LPrim ary-Se co nda ry: 2MOOP, Prim aria-Ea rth: 1M object-oriented programming, Sec ond ary E-arth: 1M object-oriented programming ISO LATI ON WILL SEE LPrim ary-Se co nda ry: 2MOOP, Prim aria-Ea rth: 1M object-oriented programming, Sec ond ary E-arth: 1M object-oriented programming
ISO LATI ON WILL SEE LPrim ary-Se co nda ry: 2MOOP, Prim aria-Ea rth: 1M object-oriented programming, Sec ond ary E-arth: 1M object-oriented programming SECURITY and SECURITY and
SECURITY and EMC EMC
EMC (Note 4) (Note 4)
(Note 4)OTHER OTHER
OTHER VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION
VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF DIMENSION EMC IMMUNITY MTBF DIMENSION
EMC IMMUNITY MTBF DIMENSION PACKAGING PACKAGING
PACKAGING I/P-O/P:4KVACI/P-FG:2KVACO/P-FG:0.5 KVAC I/P-O/P:4KVACI/P-FG:2KVACO/P-FG:0.5 KVAC
I/P-O/P:4KVACI/P-FG:2KVACO/P-FG:0.5 KVAC I/P-O/P, I/P-FG, O/P-FG:1 00M Ohm s / 5 00VDC / 25/ 70% RH Com pli anc e of the EN5 5011 (CISPR11) Cl ass B, EN610 00 -3 -2,-3 I/P-O/P, I/P-FG, O/P-FG:1 00M Ohm s / 5 00VDC / 25/ 70% RH Com pli anc e of the EN5 5011 (CISPR11) Cl ass B, EN610 00 -3 -2,-3
I/P-O/P, I/P-FG, O/P-FG:1 00M Ohm s / 5 00VDC / 25/ 70% RH Com pli anc e of the EN5 5011 (CISPR11) Cl ass B, EN610 00 -3 -2,-3 Com pli anc e of the EN6 100 0-4-2, 3,4,5 ,6,8 ,11 , EN60 601 -1-2 Com pli anc e of the EN6 100 0-4-2, 3,4,5 ,6,8 ,11 , EN60 601 -1-2
Com pli anc e of the EN6 100 0-4-2, 3,4,5 ,6,8 ,11 , EN60 601 -1-2 15 9.3 K hrs min. MI L-HDBK-2 17 F (25) 15 9.3 K hrs min. MI L-HDBK-2 17 F (25)
15 9.3 K hrs min. MI L-HDBK-2 17 F (25) 21 8*10 5*41m m (L*W*H) 21 8*10 5*41m m (L*W*H)
21 8*10 5*41m m (L*W*H) 1.19 Kg; 12pcs/15.3 Kg/0.82 CUFT 1.19 Kg; 12pcs/15.3 Kg/0.82 CUFT
1.19 Kg; 12pcs/15.3 Kg/0.82 CUFTNOTE NOTE
NOTE 1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 of ambient temperature. 1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 of ambient temperature.
1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 of ambient temperature. 2. Ripple and noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 2. Ripple and noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.
2. Ripple and noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 3. Tolerance : includes set up tolerance, line regulation and load regulation.
3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (available in http://www.meanwell.com) EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (available in http://www.meanwell.com)
EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (available in http://www.meanwell.com) 5. The reduction may be necessary underlow input voltages. Please checkthe of the curve of reduction of power for more details. 5. The reduction may be necessary underlow input voltages. Please checkthe of the curve of reduction of power for more details.
5. The reduction may be necessary underlow input voltages. Please checkthe of the curve of reduction of power for more details. 6. The length of time that is measured at the first cold start. Turn on/OFF the power supply may lead to increase of the start-up time. 6. The length of time that is measured at the first cold start. Turn on/OFF the power supply may lead to increase of the start-up time.
6. The length of time that is measured at the first cold start. Turn on/OFF the power supply may lead to increase of the start-up time. 7. No load power consumption<0.5 W when RC - & RC+ (CN100 pin1,2) 0 ~ 0.8 V or short. 7. No load power consumption<0.5 W when RC - & RC+ (CN100 pin1,2) 0 ~ 0.8 V or short.
7. No load power consumption<0.5 W when RC - & RC+ (CN100 pin1,2) 0 ~ 0.8 V or short. 8. When the input voltage is less than 40VAC, the SPS may exhibit degradation of performance. The final productmanufacturers you must re-confirm this deviation that does not affect the basic safety or essential performance. 8. When the input voltage is less than 40VAC, the SPS may exhibit degradation of performance. The final productmanufacturers you must re-confirm this deviation that does not affect the basic safety or essential performance.
8. When the input voltage is less than 40VAC, the SPS may exhibit degradation of performance. The final productmanufacturers you must re-confirm this deviation that does not affect the basic safety or essential performance. Fi file Name:MSP-450-SPEC2014-12-08 Fi file Name:MSP-450-SPEC2014-12-08
Fi file Name:MSP-450-SPEC2014-12-08