HSP-150-5 MEANWELL AC-DC Single output enclosed power supply with PFC, Output 5VDC / 30A, conformal coated

150W Single Output with the Function of PFC 150W Single Output with the Function of PFC
150W Single Output with PFC FunctionFeatures : Features :
Features : HSP-150series HSP-150series
HSP-150series UniversalAC input / Full range UniversalAC input / Full range
UniversalAC input / Full range Withstand 300VAC surge input for 5 seconds Withstand 300VAC surge input for 5 seconds
Withstand 300VAC surge input for 5 seconds Built-in active PFC function Built-in active PFC function
Built-in active PFC function High efficiency, up to 90% High efficiency, up to 90%
High efficiency, up to 90% Low current fuga'of 0.4 mA Low current fuga'of 0.4 mA
Low current fuga'of 0.4 mA Protections: short circuit / Overload / Over voltage/ Over temperature Protections: short circuit / Overload / Over voltage/ Over temperature
Protections: short circuit / Overload / Over voltage/ Over temperature Cooling by free air convection for 150W Cooling by free air convection for 150W
Cooling by free air convection for 150W and 200W with 30CFM forced air and 200W with 30CFM forced air
and 200W with 30CFM forced air Low profile:32mm Low profile:32mm
Low profile:32mm Conformalcoated Conformalcoated
Conformalcoated ZVS technology to reduce power dissipation ZVS technology to reduce power dissipation
ZVS technology to reduce power dissipation Built-in remote sense Built-in remote sense
Built-in remote sense LED indicator for power on LED indicator for power on
LED indicator for power onSPECIFICATION SPECIFICATION
SPECIFICATION MODEL MODEL
MODEL 3 years warranty 3 years warranty
3 years warrantyHSP-150-2.5 HSP-150-3.8 HSP-150-2.5 HSP-150-3.8
HSP-150-2.5 HSP-150-3.8 HSP-150-5 HSP-150-5
HSP-150-5 Bauar t gepr u f t Bauar t gepr u f t
Bauar t gepr u f t Sicherheit egel ma ge Sicherheit egel ma ge
Sicherheit egel ma ge od or s od or s
od or s be wacg be wacg
be wacg www. tuv. com www. tuv. com
www. tuv. com ID 2000000000 ID 2000000000
ID 2000000000 DC VOLTAGE RATED CURRENT DC VOLTAGE RATED CURRENT
DC VOLTAGE RATED CURRENT 2.5 V 2.5 V
2.5 V 30A 30A
30A 3.8 V 3.8 V
3.8 V 30A 30A
30A 5V 5V
5V 30A 30A
30A CURRENT RANGE(convection) CURRENT RANGE(convection)
CURRENT RANGE(convection) 0 ~ 30A0 ~ 30A 0 ~ 30A0 ~ 30A
0 ~ 30A0 ~ 30A 0 ~ 30A 0 ~ 30A
0 ~ 30A THE PEAK CURRENT RANGE(30CFM FAN) THE PEAK CURRENT RANGE(30CFM FAN)
THE PEAK CURRENT RANGE(30CFM FAN) 0 ~ 40 0 ~ 40
0 ~ 40 0 ~ 40 0 ~ 40
0 ~ 40 0 ~ 40 0 ~ 40
0 ~ 40 RATED POWER(convection) RATED POWER(convection)
RATED POWER(convection) PEAK POWER(30CFM FAN) PEAK POWER(30CFM FAN)
PEAK POWER(30CFM FAN) 75W 114W 75W 114W
75W 114W 100W 152W 100W 152W
100W 152W 150W 150W
150W 200W 200W
200W OUTPUT OUTPUT
OUTPUT RIPPLE & NOISE (max.) Note.280mVp-p 100mVp-p RIPPLE & NOISE (max.) Note.280mVp-p 100mVp-p
RIPPLE & NOISE (max.) Note.280mVp-p 100mVp-p 100mVp-p 100mVp-p
100mVp-p VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE Note.3 VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE Note.3
VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE Note.3 LINE REGULATION LINE REGULATION
LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD TIME (Typ.) LOAD REGULATION SETUP, RISE TIME HOLD TIME (Typ.)
LOAD REGULATION SETUP, RISE TIME HOLD TIME (Typ.) 2.35~2.75 V 3.4~4.2 V 2.35~2.75 V 3.4~4.2 V
2.35~2.75 V 3.4~4.2 V 2.0%2.0% 2.0%2.0%
2.0%2.0% 0.5%0.5% 0.5%0.5%
0.5%0.5% 1.0%1.0% 1.0%1.0%
1.0%1.0% 2000 ms, 100ms/230VAC 3000ms, 100ms/115VAC at full load 2000 ms, 100ms/230VAC 3000ms, 100ms/115VAC at full load
2000 ms, 100ms/230VAC 3000ms, 100ms/115VAC at full load 16ms/230VAC16ms/115VAC at full load 16ms/230VAC16ms/115VAC at full load
16ms/230VAC16ms/115VAC at full load 4.5~5.5 V 4.5~5.5 V
4.5~5.5 V 2.0% 2.0%
2.0% 0.5% 0.5%
0.5% 1.0% 1.0%
1.0% VOLTAGE RANGE Note.4 90 ~ 264VAC127 ~ 370VDC VOLTAGE RANGE Note.4 90 ~ 264VAC127 ~ 370VDC
VOLTAGE RANGE Note.4 90 ~ 264VAC127 ~ 370VDC FREQUENCY RANGE POWER FACTOR (Typ.) FREQUENCY RANGE POWER FACTOR (Typ.)
FREQUENCY RANGE POWER FACTOR (Typ.) 47 ~ 63Hz 47 ~ 63Hz
47 ~ 63Hz PF0.95/230VACPF 0.98/115VAC at full load PF0.95/230VACPF 0.98/115VAC at full load
PF0.95/230VACPF 0.98/115VAC at full load INPUT INPUT
INPUT EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) THE LEAKAGE CURRENT EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) THE LEAKAGE CURRENT
EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) THE LEAKAGE CURRENT 86% 86%
86% 0.8 A/115VAC 0.4 a/230VAC Cold start 70A/230VAC 0.8 A/115VAC 0.4 a/230VAC Cold start 70A/230VAC
0.8 A/115VAC 0.4 a/230VAC Cold start 70A/230VAC <0.4 mA / 240VAC <0.4 mA / 240VAC
<0.4 mA / 240VAC 140~180% rated output power 140~180% rated output power
140~180% rated output power 88% 88%
88% 1.2 A/115VAC 0.6 A/230VAC 1.2 A/115VAC 0.6 A/230VAC
1.2 A/115VAC 0.6 A/230VAC 90% 90%
90% 1.5 A/115VAC 0.8 A/230VAC 1.5 A/115VAC 0.8 A/230VAC
1.5 A/115VAC 0.8 A/230VAC The OVERHEAD of The OVERHEAD of
The OVERHEAD of Protection type : Hiccup mode, recovers automatically after fault condition is removed Protection type : Hiccup mode, recovers automatically after fault condition is removed
Protection type : Hiccup mode, recovers automatically after fault condition is removedPROTECTION PROTECTION
PROTECTION SHORT CIRCUIT Protection type : Hiccup mode, recovers automatically after fault condition is removed SHORT CIRCUIT Protection type : Hiccup mode, recovers automatically after fault condition is removed
SHORT CIRCUIT Protection type : Hiccup mode, recovers automatically after fault condition is removed 3.2 ~ 3.7V4.7 ~ 5.7 V 3.2 ~ 3.7V4.7 ~ 5.7 V
3.2 ~ 3.7V4.7 ~ 5.7V5.7 ~ 7.0 V 5.7 ~ 7.0 V
5.7 ~ 7.0 V ENVIRONMENT ENVIRONMENT
ENVIRONMENT SAFETY AND EMC SAFETY AND EMC
SAFETY AND EMC (Note 5) (Note 5)
(Note 5) OVER VOLTAGE OVER VOLTAGE
OVER VOLTAGE THE OVER TEMPERATURE WORKING TEMP. THE OVER TEMPERATURE WORKING TEMP.
THE OVER TEMPERATURE WORKING TEMP. OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION
OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY STANDARDS
SAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION
VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION Protection type : Shut down o/p voltage, re-power on to recover Protection type : Shut down o/p voltage, re-power on to recover
Protection type : Shut down o/p voltage, re-power on to recover 1105(TSW1) 1105(TSW1)
1105(TSW1) Protection type : Hiccup mode, recovers automatically after fault condition is removed Protection type : Hiccup mode, recovers automatically after fault condition is removed
Protection type : Hiccup mode, recovers automatically after fault condition is removed -30 ~ +70(Refer to "Reduction Curve") -30 ~ +70(Refer to "Reduction Curve")
-30 ~ +70(Refer to "Reduction Curve") 20 ~ 90% RH non-condensing 20 ~ 90% RH non-condensing
20 ~ 90% RH non-condensing -40 ~ +85, 10 ~ 95% RH -40 ~ +85, 10 ~ 95% RH
-40 ~ +85, 10 ~ 95% RH 0.03%/ (0 ~ 60) 0.03%/ (0 ~ 60)
0.03%/ (0 ~ 60) 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, y, Z axes 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, y, Z axes
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, y, Z axes UL60950-1,EN60950-1, approved UL60950-1,EN60950-1, approved
UL60950-1,EN60950-1, approved I/P-O/P:3.0 KVAC I/P-FG:2KVACO/P-FG:0.5 KVAC I/P-O/P:3.0 KVAC I/P-FG:2KVACO/P-FG:0.5 KVAC
I/P-O/P:3.0 KVAC I/P-FG:2KVACO/P-FG:0.5 KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/25/ 70% RH I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/25/ 70% RH
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/25/ 70% RH Compliance to EN55022 (CISPR22) Class B,EN61000-3-2,EN61000-3-3 Compliance to EN55022 (CISPR22) Class B,EN61000-3-2,EN61000-3-3
Compliance to EN55022 (CISPR22) Class B,EN61000-3-2,EN61000-3-31155(TSW1) 1155(TSW1)
1155(TSW1) OTHER OTHER
OTHER EMC IMMUNITY MTBF DIMENSION EMC IMMUNITY MTBF DIMENSION
EMC IMMUNITY MTBF DIMENSION PACKAGING PACKAGING
PACKAGING Compliance to EN61000-4-2,3,4,5,6,8,11;EN55024, light industry level (surge 4KV),criteria A Compliance to EN61000-4-2,3,4,5,6,8,11;EN55024, light industry level (surge 4KV),criteria A
Compliance to EN61000-4-2,3,4,5,6,8,11;EN55024, light industry level (surge 4KV),criteria A 263.2 K hrs min.MIL-HDBK-217F (25) 263.2 K hrs min.MIL-HDBK-217F (25)
263.2 K hrs min.MIL-HDBK-217F (25) 220*62*32 mm (L*W*H) 220*62*32 mm (L*W*H)
220*62*32 mm (L*W*H) 0.61 kg; 24pcs/15.6 kg/1.63 CUFT 0.61 kg; 24pcs/15.6 kg/1.63 CUFT
0.61 kg; 24pcs/15.6 kg/1.63 CUFT NOTE NOTE
NOTE 1. All the parameters are NOT speciallymentioned are measured at 230vac input, ratedload and 25 of ambient temperature. 1. All the parameters are NOT speciallymentioned are measured at 230vac input, ratedload and 25 of ambient temperature.
1. All the parameters are NOT speciallymentioned are measured at 230vac input, ratedload and 25 of ambient temperature. 2. Curly and noiseare measured at 20 mhz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 2. Curly and noiseare measured at 20 mhz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.
2. Curly and noiseare measured at 20 mhz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 3. Tolerance : line regulation and load regulation. 3. Tolerance : line regulation and load regulation.
3. Tolerance : line regulation and load regulation. 4. Deratingmay be necessary underlow input voltages. Please checkthe static characteristics for more details. 4. Deratingmay be necessary underlow input voltages. Please checkthe static characteristics for more details.
4. Deratingmay be necessary underlow input voltages. Please checkthe static characteristics for more details. 5. The supply is considered a component which will be installedinto a final computer. All EMC testing has been executed for mountingthe unit on a 360mm*360mm metalplate with 1mm of thickness. The final equipment must be re-confirmed that still meets EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies." (available in http://www.meanwell.com) 5. The supply is considered a component which will be installedinto a final computer. All EMC testing has been executed for mountingthe unit on a 360mm*360mm metalplate with 1mm of thickness. The final equipment must be re-confirmed that still meets EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies." (available in http://www.meanwell.com)
5. The supply is considered a component which will be installedinto a final computer. All EMC testing has been executed for mountingthe unit on a 360mm*360mm metalplate with 1mm of thickness. The final equipment must be re-confirmed that still meets EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies." (available in http://www.meanwell.com)File Name:HSP-150-SPEC2016-01-21 File name:HSP-150-SPEC2016-01-21
File name:HSP-150-SPEC2016-01-21