150W Single Output with the Function of PFC
150W Single Output with the Function of PFC
150W Single Output with PFC FunctionFeatures :
Features :
Features :
HSP-150series
HSP-150series
HSP-150series
UniversalAC input / Full range
UniversalAC input / Full range
UniversalAC input / Full range
Withstand 300VAC surge input for 5 seconds
Withstand 300VAC surge input for 5 seconds
Withstand 300VAC surge input for 5 seconds
Built-in active PFC function
Built-in active PFC function
Built-in active PFC function
High efficiency, up to 90%
High efficiency, up to 90%
High efficiency, up to 90%
Low current fuga'of 0.4 mA
Low current fuga'of 0.4 mA
Low current fuga'of 0.4 mA
Protections: short circuit / Overload / Over voltage/ Over temperature
Protections: short circuit / Overload / Over voltage/ Over temperature
Protections: short circuit / Overload / Over voltage/ Over temperature
Cooling by free air convection for 150W
Cooling by free air convection for 150W
Cooling by free air convection for 150W
and 200W with 30CFM forced air
and 200W with 30CFM forced air
and 200W with 30CFM forced air
Low profile:32mm
Low profile:32mm
Low profile:32mm
Conformalcoated
Conformalcoated
Conformalcoated
ZVS technology to reduce power dissipation
ZVS technology to reduce power dissipation
ZVS technology to reduce power dissipation
Built-in remote sense
Built-in remote sense
Built-in remote sense
LED indicator for power on
LED indicator for power on
LED indicator for power onSPECIFICATION
SPECIFICATION
SPECIFICATION
MODEL
MODEL
MODEL
3 years warranty
3 years warranty
3 years warrantyHSP-150-2.5 HSP-150-3.8
HSP-150-2.5 HSP-150-3.8
HSP-150-2.5 HSP-150-3.8
HSP-150-5
HSP-150-5
HSP-150-5
Bauar t gepr u f t
Bauar t gepr u f t
Bauar t gepr u f t
Sicherheit egel ma ge
Sicherheit egel ma ge
Sicherheit egel ma ge
od or s
od or s
od or s
be wacg
be wacg
be wacg
www. tuv. com
www. tuv. com
www. tuv. com
ID 2000000000
ID 2000000000
ID 2000000000
DC VOLTAGE RATED CURRENT
DC VOLTAGE RATED CURRENT
DC VOLTAGE RATED CURRENT
2.5 V
2.5 V
2.5 V
30A
30A
30A
3.8 V
3.8 V
3.8 V
30A
30A
30A
5V
5V
5V
30A
30A
30A
CURRENT RANGE(convection)
CURRENT RANGE(convection)
CURRENT RANGE(convection)
0 ~ 30A0 ~ 30A
0 ~ 30A0 ~ 30A
0 ~ 30A0 ~ 30A
0 ~ 30A
0 ~ 30A
0 ~ 30A
THE PEAK CURRENT RANGE(30CFM FAN)
THE PEAK CURRENT RANGE(30CFM FAN)
THE PEAK CURRENT RANGE(30CFM FAN)
0 ~ 40
0 ~ 40
0 ~ 40
0 ~ 40
0 ~ 40
0 ~ 40
0 ~ 40
0 ~ 40
0 ~ 40
RATED POWER(convection)
RATED POWER(convection)
RATED POWER(convection)
PEAK POWER(30CFM FAN)
PEAK POWER(30CFM FAN)
PEAK POWER(30CFM FAN)
75W 114W
75W 114W
75W 114W
100W 152W
100W 152W
100W 152W
150W
150W
150W
200W
200W
200W
OUTPUT
OUTPUT
OUTPUT
RIPPLE & NOISE (max.) Note.280mVp-p 100mVp-p
RIPPLE & NOISE (max.) Note.280mVp-p 100mVp-p
RIPPLE & NOISE (max.) Note.280mVp-p 100mVp-p
100mVp-p
100mVp-p
100mVp-p
VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE Note.3
VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE Note.3
VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE Note.3
LINE REGULATION
LINE REGULATION
LINE REGULATION
LOAD REGULATION SETUP, RISE TIME HOLD TIME (Typ.)
LOAD REGULATION SETUP, RISE TIME HOLD TIME (Typ.)
LOAD REGULATION SETUP, RISE TIME HOLD TIME (Typ.)
2.35~2.75 V 3.4~4.2 V
2.35~2.75 V 3.4~4.2 V
2.35~2.75 V 3.4~4.2 V
2.0%2.0%
2.0%2.0%
2.0%2.0%
0.5%0.5%
0.5%0.5%
0.5%0.5%
1.0%1.0%
1.0%1.0%
1.0%1.0%
2000 ms, 100ms/230VAC 3000ms, 100ms/115VAC at full load
2000 ms, 100ms/230VAC 3000ms, 100ms/115VAC at full load
2000 ms, 100ms/230VAC 3000ms, 100ms/115VAC at full load
16ms/230VAC16ms/115VAC at full load
16ms/230VAC16ms/115VAC at full load
16ms/230VAC16ms/115VAC at full load
4.5~5.5 V
4.5~5.5 V
4.5~5.5 V
2.0%
2.0%
2.0%
0.5%
0.5%
0.5%
1.0%
1.0%
1.0%
VOLTAGE RANGE Note.4 90 ~ 264VAC127 ~ 370VDC
VOLTAGE RANGE Note.4 90 ~ 264VAC127 ~ 370VDC
VOLTAGE RANGE Note.4 90 ~ 264VAC127 ~ 370VDC
FREQUENCY RANGE POWER FACTOR (Typ.)
FREQUENCY RANGE POWER FACTOR (Typ.)
FREQUENCY RANGE POWER FACTOR (Typ.)
47 ~ 63Hz
47 ~ 63Hz
47 ~ 63Hz
PF0.95/230VACPF 0.98/115VAC at full load
PF0.95/230VACPF 0.98/115VAC at full load
PF0.95/230VACPF 0.98/115VAC at full load
INPUT
INPUT
INPUT
EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) THE LEAKAGE CURRENT
EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) THE LEAKAGE CURRENT
EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) THE LEAKAGE CURRENT
86%
86%
86%
0.8 A/115VAC 0.4 a/230VAC Cold start 70A/230VAC
0.8 A/115VAC 0.4 a/230VAC Cold start 70A/230VAC
0.8 A/115VAC 0.4 a/230VAC Cold start 70A/230VAC
<0.4 mA / 240VAC
<0.4 mA / 240VAC
<0.4 mA / 240VAC
140~180% rated output power
140~180% rated output power
140~180% rated output power
88%
88%
88%
1.2 A/115VAC 0.6 A/230VAC
1.2 A/115VAC 0.6 A/230VAC
1.2 A/115VAC 0.6 A/230VAC
90%
90%
90%
1.5 A/115VAC 0.8 A/230VAC
1.5 A/115VAC 0.8 A/230VAC
1.5 A/115VAC 0.8 A/230VAC
The OVERHEAD of
The OVERHEAD of
The OVERHEAD of
Protection type : Hiccup mode, recovers automatically after fault condition is removed
Protection type : Hiccup mode, recovers automatically after fault condition is removed
Protection type : Hiccup mode, recovers automatically after fault condition is removedPROTECTION
PROTECTION
PROTECTION
SHORT CIRCUIT Protection type : Hiccup mode, recovers automatically after fault condition is removed
SHORT CIRCUIT Protection type : Hiccup mode, recovers automatically after fault condition is removed
SHORT CIRCUIT Protection type : Hiccup mode, recovers automatically after fault condition is removed
3.2 ~ 3.7V4.7 ~ 5.7 V
3.2 ~ 3.7V4.7 ~ 5.7 V
3.2 ~ 3.7V4.7 ~ 5.7V5.7 ~ 7.0 V
5.7 ~ 7.0 V
5.7 ~ 7.0 V
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
SAFETY AND EMC
SAFETY AND EMC
SAFETY AND EMC
(Note 5)
(Note 5)
(Note 5)
OVER VOLTAGE
OVER VOLTAGE
OVER VOLTAGE
THE OVER TEMPERATURE WORKING TEMP.
THE OVER TEMPERATURE WORKING TEMP.
THE OVER TEMPERATURE WORKING TEMP.
OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION
OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION
OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION
SAFETY STANDARDS
SAFETY STANDARDS
SAFETY STANDARDS
VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION
VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION
VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION
Protection type : Shut down o/p voltage, re-power on to recover
Protection type : Shut down o/p voltage, re-power on to recover
Protection type : Shut down o/p voltage, re-power on to recover
1105(TSW1)
1105(TSW1)
1105(TSW1)
Protection type : Hiccup mode, recovers automatically after fault condition is removed
Protection type : Hiccup mode, recovers automatically after fault condition is removed
Protection type : Hiccup mode, recovers automatically after fault condition is removed
-30 ~ +70(Refer to "Reduction Curve")
-30 ~ +70(Refer to "Reduction Curve")
-30 ~ +70(Refer to "Reduction Curve")
20 ~ 90% RH non-condensing
20 ~ 90% RH non-condensing
20 ~ 90% RH non-condensing
-40 ~ +85, 10 ~ 95% RH
-40 ~ +85, 10 ~ 95% RH
-40 ~ +85, 10 ~ 95% RH
0.03%/ (0 ~ 60)
0.03%/ (0 ~ 60)
0.03%/ (0 ~ 60)
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, y, Z axes
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, y, Z axes
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, y, Z axes
UL60950-1,EN60950-1, approved
UL60950-1,EN60950-1, approved
UL60950-1,EN60950-1, approved
I/P-O/P:3.0 KVAC I/P-FG:2KVACO/P-FG:0.5 KVAC
I/P-O/P:3.0 KVAC I/P-FG:2KVACO/P-FG:0.5 KVAC
I/P-O/P:3.0 KVAC I/P-FG:2KVACO/P-FG:0.5 KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/25/ 70% RH
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/25/ 70% RH
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/25/ 70% RH
Compliance to EN55022 (CISPR22) Class B,EN61000-3-2,EN61000-3-3
Compliance to EN55022 (CISPR22) Class B,EN61000-3-2,EN61000-3-3
Compliance to EN55022 (CISPR22) Class B,EN61000-3-2,EN61000-3-31155(TSW1)
1155(TSW1)
1155(TSW1)
OTHER
OTHER
OTHER
EMC IMMUNITY MTBF DIMENSION
EMC IMMUNITY MTBF DIMENSION
EMC IMMUNITY MTBF DIMENSION
PACKAGING
PACKAGING
PACKAGING
Compliance to EN61000-4-2,3,4,5,6,8,11;EN55024, light industry level (surge 4KV),criteria A
Compliance to EN61000-4-2,3,4,5,6,8,11;EN55024, light industry level (surge 4KV),criteria A
Compliance to EN61000-4-2,3,4,5,6,8,11;EN55024, light industry level (surge 4KV),criteria A
263.2 K hrs min.MIL-HDBK-217F (25)
263.2 K hrs min.MIL-HDBK-217F (25)
263.2 K hrs min.MIL-HDBK-217F (25)
220*62*32 mm (L*W*H)
220*62*32 mm (L*W*H)
220*62*32 mm (L*W*H)
0.61 kg; 24pcs/15.6 kg/1.63 CUFT
0.61 kg; 24pcs/15.6 kg/1.63 CUFT
0.61 kg; 24pcs/15.6 kg/1.63 CUFT
NOTE
NOTE
NOTE
1. All the parameters are NOT speciallymentioned are measured at 230vac input, ratedload and 25 of ambient temperature.
1. All the parameters are NOT speciallymentioned are measured at 230vac input, ratedload and 25 of ambient temperature.
1. All the parameters are NOT speciallymentioned are measured at 230vac input, ratedload and 25 of ambient temperature.
2. Curly and noiseare measured at 20 mhz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.
2. Curly and noiseare measured at 20 mhz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.
2. Curly and noiseare measured at 20 mhz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.
3. Tolerance : line regulation and load regulation.
3. Tolerance : line regulation and load regulation.
3. Tolerance : line regulation and load regulation.
4. Deratingmay be necessary underlow input voltages. Please checkthe static characteristics for more details.
4. Deratingmay be necessary underlow input voltages. Please checkthe static characteristics for more details.
4. Deratingmay be necessary underlow input voltages. Please checkthe static characteristics for more details.
5. The supply is considered a component which will be installedinto a final computer. All EMC testing has been executed for mountingthe unit on a 360mm*360mm metalplate with 1mm of thickness. The final equipment must be re-confirmed that still meets EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies." (available in http://www.meanwell.com)
5. The supply is considered a component which will be installedinto a final computer. All EMC testing has been executed for mountingthe unit on a 360mm*360mm metalplate with 1mm of thickness. The final equipment must be re-confirmed that still meets EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies." (available in http://www.meanwell.com)
5. The supply is considered a component which will be installedinto a final computer. All EMC testing has been executed for mountingthe unit on a 360mm*360mm metalplate with 1mm of thickness. The final equipment must be re-confirmed that still meets EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies." (available in http://www.meanwell.com)File Name:HSP-150-SPEC2016-01-21
File name:HSP-150-SPEC2016-01-21
File name:HSP-150-SPEC2016-01-21