HRP-150-3.3 MEANWELL AC-DC Single output enclosed power supply, Output 3.3VDC / 30A, 1U low profile, free ai..

150W Single Output with the Function of PFC 150W Single Output with the Function of PFC
150W Single Output with the Function of PFC HRP-150series HRP-150series
HRP-150series Features : Features :
Features : Universal AC input / Full range Universal AC input / Full range
Universal AC input / Full range Built-in active PFC function,PF>0.95 Built-in active PFC function,PF>0.95
Built-in active PFC function,PF>0.95 High efficiency, up to 89% High efficiency, up to 89%
High efficiency, up to 89% Withstand 300VAC surge input for 5 seconds Withstand 300VAC surge input for 5 seconds
Withstand 300VAC surge input for 5 seconds Protections: short circuit / Overload / Over voltage / Over temperature Protections: short circuit / Overload / Over voltage / Over temperature
Protections: short circuit / Overload / Over voltage / Over temperature Cooling by free air convection Cooling by free air convection
Cooling by free air convection Built-in limiting circuit of constant current Built-in limiting circuit of constant current
Built-in limiting circuit of constant current 1U low profile 38mm 1U low profile 38mm
1U low profile 38mm Built-in remote sense function Built-in remote sense function
Built-in remote sense function 5 years warranty 5 years warranty
5 years warranty Bauar t gepr u f t Bauar t gepr u f t
Bauar t gepr u f t Sicherheit egel ma ge Sicherheit egel ma ge
Sicherheit egel ma ge od or s od or s
od or s be wacg be wacg
be wacg SPECIFICATION SPECIFICATION
SPECIFICATION MODEL MODEL
MODEL DC VOLTAGE RATED CURRENT RANGE RATED POWER DC VOLTAGE RATED CURRENT RANGE RATED POWER
DC VOLTAGE RATED CURRENT RANGE RATED POWER www. tuv. com www. tuv. com
www. tuv. com ID 2000000000 ID 2000000000
ID 2000000000HRP-150-3.3 HRP-150-5HRP-150-7.5 HRP-150-12HRP-150-15HRP-150-24HRP-150-36HRP-150-48 HRP-150-3.3 HRP-150-5HRP-150-7.5 HRP-150-12HRP-150-15HRP-150-24HRP-150-36HRP-150-48
HRP-150-3.3 HRP-150-5HRP-150-7.5 HRP-150-12HRP-150-15HRP-150-24HRP-150-36HRP-150-48 3.3 V 5V 7.5 V 12V15V24V36V48V 3.3 V 5V 7.5 V 12V15V24V36V48V
3.3 V 5V 7.5 V 12V15V24V36V48V 30A 26A20A13A10A6.5A 4.3 3.3 A 30A 26A20A13A10A6.5A 4.3 3.3 A
30A 26A20A13A10A6.5A 4.3 3.3 A 0 ~ 30A0 ~ 26A0 ~ 20A0 ~ 13A0 ~ 10A0 ~ 6.5 0 ~ 4.3 0 ~ 3.3 0 ~ 30A0 ~ 26A0 ~ 20A0 ~ 13A0 ~ 10A0 ~ 6.5 0 ~ 4.3 0 ~ 3.3
0 ~ 30A0 ~ 26A0 ~ 20A0 ~ 13A0 ~ 10A0 ~ 6.5 0 ~ 4.3 0 ~ 3.3 99W130W 150W 156W 150W 156W 154.8W158.4W 99W130W 150W 156W 150W 156W 154.8W158.4W
99W130W 150W 156W 150W 156W 154.8W158.4W RIPPLE & NOISE (max.) Note.280mVp-p80mVp-p100mVp-p120mVp-p150mVp-p150mVp-p200mVp-p240mVp-p RIPPLE & NOISE (max.) Note.280mVp-p80mVp-p100mVp-p120mVp-p150mVp-p150mVp-p200mVp-p240mVp-p
RIPPLE & NOISE (max.) Note.280mVp-p80mVp-p100mVp-p120mVp-p150mVp-p150mVp-p200mVp-p240mVp-p OUTPUT VOLTAGE ADJ. RANGE of OUTPUT VOLTAGE ADJ. RANGE of
OUTPUT VOLTAGE ADJ. RANGE of 2.8 ~ 3.8V4.3 ~ 5.8V6.8 ~ 9V 10.2 ~ 13.8V13.5 ~ 18V 21.6 ~ 28.8V28.8 ~ 39.6V40.8 ~ 55.2 V 2.8 ~ 3.8V4.3 ~ 5.8V6.8 ~ 9V 10.2 ~ 13.8V13.5 ~ 18V 21.6 ~ 28.8V28.8 ~ 39.6V40.8 ~ 55.2 V
2.8 ~ 3.8V4.3 ~ 5.8V6.8 ~ 9V 10.2 ~ 13.8V13.5 ~ 18V 21.6 ~ 28.8V28.8 ~ 39.6V40.8 ~ 55.2 V VOLTAGE TOLERANCE Note.32.5%2.5%2.5%1.5%1.5%1.5%1.5%1.5% VOLTAGE TOLERANCE Note.32.5%2.5%2.5%1.5%1.5%1.5%1.5%1.5%
VOLTAGE TOLERANCE Note.32.5%2.5%2.5%1.5%1.5%1.5%1.5%1.5% LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD TIME (Typ.) LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD TIME (Typ.)
LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD TIME (Typ.) 0.5%0.5%0.5%0.3%0.3%0.2%0.2%0.2% 0.5%0.5%0.5%0.3%0.3%0.2%0.2%0.2%
0.5%0.5%0.5%0.3%0.3%0.2%0.2%0.2% 1.0%1.0%1.0%0.5%0.5%0.5%0.5%0.5% 1.0%1.0%1.0%0.5%0.5%0.5%0.5%0.5%
1.0%1.0%1.0%0.5%0.5%0.5%0.5%0.5% 3000ms, 50ms/230VAC 3000ms, 50ms/115VAC at full load 3000ms, 50ms/230VAC 3000ms, 50ms/115VAC at full load
3000ms, 50ms/230VAC 3000ms, 50ms/115VAC at full load 16ms/230VAC16ms/115VAC at full load 16ms/230VAC16ms/115VAC at full load
16ms/230VAC16ms/115VAC at full load VOLTAGE RANGE Note.5 85 ~ 264VAC120 ~ 370VDC VOLTAGE RANGE Note.5 85 ~ 264VAC120 ~ 370VDC
VOLTAGE RANGE Note.5 85 ~ 264VAC120 ~ 370VDC FREQUENCY RANGE POWER FACTOR (Typ.) FREQUENCY RANGE POWER FACTOR (Typ.)
FREQUENCY RANGE POWER FACTOR (Typ.) 47 ~ 63Hz 47 ~ 63Hz
47 ~ 63Hz PF>0.95/230VAC PF>0.99/115VAC at full load PF>0.95/230VAC PF>0.99/115VAC at full load
PF>0.95/230VAC PF>0.99/115VAC at full load INPUT INPUT
INPUT EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) THE LEAKAGE CURRENT EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) THE LEAKAGE CURRENT
EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) THE LEAKAGE OF CURRENTOVERLOAD The OVERHEAD of
The OVERHEAD of 78.5% 85% 78.5% 85%
78.5% 85% 1.7 A/115VAC0.9A/230VAC 1.7 A/115VAC0.9A/230VAC
1.7 A/115VAC0.9A/230VAC 35A/115VAC70A/230VAC 35A/115VAC70A/230VAC
35A/115VAC70A/230VAC <1mA / 240VAC <1mA / 240VAC
<1mA / 240VAC 105 ~ 135% rated output power 105 ~ 135% rated output power
105 ~ 135% rated output power 87%88%88%88%89%89% 87%88%88%88%89%89%
87%88%88%88%89%89% Protection type : Constant current limiting, recovers automatically after fault condition is removed Protection type : Constant current limiting, recovers automatically after fault condition is removed
Protection type : Constant current limiting, recovers automatically after fault condition is removed PROTECTION PROTECTION
PROTECTIONOVER VOLTAGE OVER VOLTAGE
OVER VOLTAGE 3.96 ~ V 4.62 3.96 ~ V 4.62
3.96 ~ V 4.62 6 ~ 7V9.4 ~ 10.9V14.4 ~ 16.8V18.8 ~ 21.8V30 ~ 34.8 V 41.4 ~ 48.6V57.6 ~ 67.2 V 6 ~ 7V9.4 ~ 10.9V14.4 ~ 16.8V18.8 ~ 21.8V30 ~ 34.8 V 41.4 ~ 48.6V57.6 ~ 67.2 V
6 ~ 7V9.4 ~ 10.9V14.4 ~ 16.8V18.8 ~ 21.8V30 ~ 34.8 V 41.4 ~ 48.6V57.6 ~ 67.2 V ENVIRONMENT ENVIRONMENT
ENVIRONMENT SAFETY AND EMC SAFETY AND EMC
SAFETY AND EMC (Note 4) (Note 4)
(Note 4)OTHER OTHER
OTHERSOVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY THE OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY
THE OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY STORAGE TEMP., THE HUMIDITY TEMP. COEFFICIENT VIBRATION STORAGE TEMP., THE HUMIDITY TEMP. COEFFICIENT VIBRATION
STORAGE TEMP., THE HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION SAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION
SAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF DIMENSION EMC IMMUNITY MTBF DIMENSION
EMC IMMUNITY MTBF DIMENSION PACKAGING PACKAGING
PACKAGING Protection type : Shut down o/p voltage, re-power on to recover Protection type : Shut down o/p voltage, re-power on to recover
Protection type : Shut down o/p voltage, re-power on to recover Shut down o/p voltage, recovers automatically after temperature goes down Shut down o/p voltage, recovers automatically after temperature goes down
Shut down o/p voltage, recovers automatically after temperature goes down -40 ~ +70c (Refer to "Reduction Curve") -40 ~ +70c (Refer to "Reduction Curve")
-40 ~ +70c (Refer to "Reduction Curve") 20 ~ 90% RH non-condensing 20 ~ 90% RH non-condensing
20 ~ 90% RH non-condensing -50 ~ +85℃, 10 ~ 95% RH -50 ~ +85℃, 10 ~ 95% RH
-50 ~ +85℃, 10 ~ 95% RH 0.04%/c (0 ~ 50 ° c) 0.04%/c (0 ~ 50 ° c)
0.04%/c (0 ~ 50 ° c) 10 ~ 500 hz, 5 G, 10 min./1cycle, 60min. each along X, y, Z axes 10 ~ 500 hz, 5 G, 10 min./1cycle, 60min. each along X, y, Z axes
10 ~ 500 hz, 5 G, 10 min./1cycle, 60min. each along X, y, Z axes UL60950-1, TUV EN60950-1 approved UL60950-1, TUV EN60950-1 approved
UL60950-1, TUV EN60950-1 approved I/P-O/P:3KVAC I/P-FG:2KVACO/P-FG:0.5 KVAC I/P-O/P:3KVAC I/P-FG:2KVACO/P-FG:0.5 KVAC
I/P-O/P:3KVAC I/P-FG:2KVACO/P-FG:0.5 KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25c/ 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25c/ 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25c/ 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2, heavy industry level, criteria Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2, heavy industry level, criteria
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2, heavy industry level, criteria 238.8 K hrs min.MIL-HDBK-217F (25c) 238.8 K hrs min.MIL-HDBK-217F (25c)
238.8 K hrs min.MIL-HDBK-217F (25c) 159*97*38 mm (L*W*H) 159*97*38 mm (L*W*H)
159*97*38 mm (L*W*H) 0.61 Kg; 24pcs/15.6 Kg/0.76 CUFT 0.61 Kg; 24pcs/15.6 Kg/0.76 CUFT
0.61 Kg; 24pcs/15.6 Kg/0.76 CUFTNOTE NOTE
NOTE 1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 ° c ambient temperature. 1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 ° c ambient temperature.
1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 ° c ambient temperature. 2. Curly and noiseare measured at 20 mhz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 2. Curly and noiseare measured at 20 mhz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.
2. Curly and noiseare measured at 20 mhz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 3. Tolerance : includes set up tolerance, line regulation and load regulation.
3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies." EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies."
EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies." (asavailable in http://www.meanwell.com) (asavailable in http://www.meanwell.com)
(asavailable in http://www.meanwell.com) 5. Deratingmay be necessary underlow input voltages. Please checkthe of the curve of reduction of power for more details. 5. Deratingmay be necessary underlow input voltages. Please checkthe of the curve of reduction of power for more details.
5. Deratingmay be necessary underlow input voltages. Please checkthe of the curve of reduction of power for more details.File name:HRP-150-SPEC2015-07-06 File name:HRP-150-SPEC2015-07-06
File name:HRP-150-SPEC2015-07-06