GS220A20-R7B MEANWELL AC-DC Industrial desktop adaptor with 3 pin IEC320-C14 input socket, Output 20VDC / 11..

220W AC-DC Industrial AdaptorGS220series 220W AC-DC Industrial AdaptorGS220series
220W AC-DC Industrial AdaptorGS220seriesFeatures : Features :
Features : Universal AC input / Full range Universal AC input / Full range
Universal AC input / Full range Built-in active PFC function Built-in active PFC function
Built-in active PFC function Do not load powerconsumptione0.5w Do not load powerconsumptione0.5w
Do not load powerconsumptione0.5w The energy efficiencyLevelV The energy efficiencyLevelV
The energy efficiencyLevelV To comply with EISA 2007,NRCan,AU/NZ MEPS and the EU's ErP To comply with EISA 2007,NRCan,AU/NZ MEPS and the EU's ErP
To comply with EISA 2007,NRCan,AU/NZ MEPS and the EU's ErP 3 pole AC inlet IEC320-C14 3 pole AC inlet IEC320-C14
3 pole AC inlet IEC320-C14 Be able to(with earthpin) Be able to(with earthpin)
Be able to(with earthpin) Protections: short circuit / Overload / Over voltage / Over temperature Protections: short circuit / Overload / Over voltage / Over temperature
Protections: short circuit / Overload / Over voltage / Over temperature Fully enclosed plastic case Fully enclosed plastic case
Fully enclosed plastic case LED indicator for power on LED indicator for power on
LED indicator for power on 2 years warranty 2 years warranty
2 years warranty SPECIFICATION SPECIFICATION
SPECIFICATION ORDER NO. ORDER NO.
ORDER NO. SECURITY MODEL NO. SECURITY MODEL NO.
SECURITY MODEL NO. GS220A12-R7B GS220A12-R7B
GS220A12-R7B GS220A12 GS220A12
GS220A12 GS220A15-R7B GS220A15-R7B
GS220A15-R7B GS220A15 GS220A15
GS220A15 GS220A20-R7B GS220A20-R7B
GS220A20-R7B GS220A20 GS220A20
GS220A20 (except for 48V) (except for 48V)
(except for 48V)GS220A24-R7B GS220A24-R7B
GS220A24-R7B GS220A24 GS220A24
GS220A24 GS220A48-R7B GS220A48-R7B
GS220A48-R7B GS220A48 GS220A48
GS220A48 DC VOLTAGENote.2 12V DC VOLTAGENote.2 12V
DC VOLTAGENote.2 12V 15V 15V
15V 20V 24V 48V 20V 24V 48V
20V 24V 48V RATED CURRENT CURRENT RANGE RATED POWER (max.) RATED CURRENT CURRENT RANGE RATED POWER (max.)
RATED CURRENT CURRENT RANGE RATED POWER (max.) 15A 15A
15A 0 ~ 15A 0 ~ 15A
0 ~ 15A 180W 180W
180W 13.4 A 13.4 A
13.4 A 0 ~ 13.4 A 0 ~ 13.4 A
0 ~ 13.4 A 201W 201W
201W 11 To 9.2A4.6A 11 To 9.2A4.6A
11 To 9.2A4.6A 0 ~ 11A 0 ~ 9.2A0 ~ 4.6 TO 0 ~ 11A 0 ~ 9.2A0 ~ 4.6 TO
0 ~ 11A 0 ~ 9.2A0 ~ 4.6 TO 220W221W221W 220W221W221W
220W221W221WOUTPUT OUTPUT
OUTPUT RIPPLE & NOISE (max.) Note.380mVp-p VOLTAGE TOLERANCE Note.4 5.0% LINE REGULATIONNote.51.0% RIPPLE & NOISE (max.) Note.380mVp-p VOLTAGE TOLERANCE Note.4 5.0% LINE REGULATIONNote.51.0%
RIPPLE & NOISE (max.) Note.380mVp-p VOLTAGE TOLERANCE Note.4 5.0% LINE REGULATIONNote.51.0% 100mVp-p 100mVp-p
100mVp-p 5.0% 5.0%
5.0% 1.0% 1.0%
1.0% 150mVp-p180mVp-p240mVp-p 150mVp-p180mVp-p240mVp-p
150mVp-p180mVp-p240mVp-p 4.0%3.0%2.0% 4.0%3.0%2.0%
4.0%3.0%2.0% 1.0%1.0%1.0% 1.0%1.0%1.0%
1.0%1.0%1.0% LOAD REGULATION LOAD REGULATION
LOAD REGULATION 5.0% 5.0%
5.0% 5.0% 5.0%
5.0% 4.0%3.0%2.0% 4.0%3.0%2.0%
4.0%3.0%2.0% SETUP, RISE TIME Note.62000ms, 20ms / 230VAC2000ms, 20ms / 115VACat full load SETUP, RISE TIME Note.62000ms, 20ms / 230VAC2000ms, 20ms / 115VACat full load
SETUP, RISE TIME Note.62000ms, 20ms / 230VAC2000ms, 20ms / 115VACat full load HOLD TIME (Typ.) HOLD TIME (Typ.)
HOLD TIME (Typ.) 20ms / 230VAC20ms / 115VAC at full load 20ms / 230VAC20ms / 115VAC at full load
20ms / 230VAC20ms / 115VAC at full load VOLTAGE RANGENote.790 ~ 264VAC 127 ~ 370VDC VOLTAGE RANGENote.790 ~ 264VAC 127 ~ 370VDC
VOLTAGE RANGENote.790 ~ 264VAC 127 ~ 370VDC FREQUENCY RANGE POWER FACTOR (Typ.) FREQUENCY RANGE POWER FACTOR (Typ.)
FREQUENCY RANGE POWER FACTOR (Typ.) 47 ~ 63Hz 47 ~ 63Hz
47 ~ 63Hz PF>0.91 / 230VAC PF>0.98 / 115VAC at full load PF>0.91 / 230VAC PF>0.98 / 115VAC at full load
PF>0.91 / 230VAC PF>0.98 / 115VAC at full load INPUT INPUT
INPUT EFFICIENCY (Typ.) EFFICIENCY (Typ.)
EFFICIENCY (Typ.) 90% 90%
90% 90% 90%
90% 92%93.5% 94.5% 92%93.5% 94.5%
92%93.5% 94.5% PROTECTION PROTECTION
PROTECTION AC CURRENT (Typ.) Input CURRENT (max.) The LEAKAGE CURRENT(max.) AC CURRENT (Typ.) Input CURRENT (max.) The LEAKAGE CURRENT(max.)
AC CURRENT (Typ.) Input CURRENT (max.) The LEAKAGE CURRENT(max.)The OVERHEAD of The OVERHEAD of
OVERLOADOVER VOLTAGE OVER VOLTAGE
OVER VOLTAGE 4A / 115VAC2A / 230VAC 4A / 115VAC2A / 230VAC
4A / 115VAC2A / 230VAC 120A / 230VAC 120A / 230VAC
120A / 230VAC 1.5 mA / 240VAC 1.5 mA / 240VAC
1.5 mA / 240VAC 105 ~ 135%rated output power 105 ~ 135%rated output power
105 ~ 135%rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed Protection type : Hiccup mode, recovers automatically after fault condition is removed
Protection type : Hiccup mode, recovers automatically after fault condition is removed 105 ~ 135% rated output voltage 105 ~ 135% rated output voltage
105 ~ 135% rated output voltage Protection type : Shut down o/p voltage, re-power on to recover Protection type : Shut down o/p voltage, re-power on to recover
Protection type : Shut down o/p voltage, re-power on to recover Over TEMPERATURE shut down o/p voltage, recovers automatically after temperature goes down Over TEMPERATURE shut down o/p voltage, recovers automatically after temperature goes down
Over TEMPERATURE shut down o/p voltage, recovers automatically after temperature goes downENVIRONMENT ENVIRONMENT
ENVIRONMENT SAFETY AND EMC SAFETY AND EMC
SAFETY AND EMC (Note. 8) (Note. 8)
(Note. 8)OTHER CONNECTOR OTHER CONNECTOR
OTHER CONNECTOR WORKING TEMP. OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION WORKING TEMP. OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION
WORKING TEMP. OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS OF STRESS RESISTANCE INSULATION RESISTANCE SAFETY STANDARDS OF STRESS RESISTANCE INSULATION RESISTANCE
SAFETY STANDARDS OF STRESS RESISTANCE INSULATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF DIMENSION PACKING EMC EMISSION EMC IMMUNITY MTBF DIMENSION PACKING
EMC EMISSION EMC IMMUNITY MTBF DIMENSION PACKING PLUG PLUG
PLUG -30 ~ +60 (Refer to "Reduction Curve") -30 ~ +60 (Refer to "Reduction Curve")
-30 ~ +60 (Refer to "Reduction Curve") 20% ~ 90% RH non-condensing 20% ~ 90% RH non-condensing
20% ~ 90% RH non-condensing -40 ~ +85, 10 ~ 95% RH -40 ~ +85, 10 ~ 95% RH
-40 ~ +85, 10 ~ 95% RH 0.03%/(0~50) 0.03%/(0~50)
0.03%/(0~50) 10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes 10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes
10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes UL60950-1, CSA C22.2, TUV EN60950-1, BSMI CNS14336, CCC GB4943, PSE J60950-1(except for 48V) approved UL60950-1, CSA C22.2, TUV EN60950-1, BSMI CNS14336, CCC GB4943, PSE J60950-1(except for 48V) approved
UL60950-1, CSA C22.2, TUV EN60950-1, BSMI CNS14336, CCC GB4943, PSE J60950-1(except for 48V) approved I/P-O/P: 3KVAC I/P-O/P: 3KVAC
I/P-O/P: 3KVAC I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH
I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH Compliance to EN55022 class B, EN61000-3-2,3, FCC PART 15 / CISPR22 class B, CNS13438 class B, GB9254, GB17625.1 Compliance to EN55022 class B, EN61000-3-2,3, FCC PART 15 / CISPR22 class B, CNS13438 class B, GB9254, GB17625.1
Compliance to EN55022 class B, EN61000-3-2,3, FCC PART 15 / CISPR22 class B, CNS13438 class B, GB9254, GB17625.1 Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A
Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A 191.3 K hrs min.MIL-HDBK-217F(25 ) 191.3 K hrs min.MIL-HDBK-217F(25 )
191.3 K hrs min.MIL-HDBK-217F(25 ) 210*85*46 mm (L*W*H) 210*85*46 mm (L*W*H)
210*85*46 mm (L*W*H) 1.1 Kg; 12pcs/14.2 Kg/0.73 CUFT 1.1 Kg; 12pcs/14.2 Kg/0.73 CUFT
1.1 Kg; 12pcs/14.2 Kg/0.73 CUFT See page 2; Other type available by customer requested See page 2; Other type available by customer requested
See page 2; Other type available by customer requestedNOTE NOTE
NOTE CABLESee page 2; Other type available by customer requested CABLESee page 2; Other type available by customer requested
CABLESee page 2; Other type available by customer requested 1. All parameters are specified at 230vac input, rated load, 25 70% rh ambient. 1. All parameters are specified at 230vac input, rated load, 25 70% rh ambient.
1. All parameters are specified at 230vac input, rated load, 25 70% rh ambient. 2. DC voltage:The output of voltageset in the point measure by plug terminal & 50% load. 2. DC voltage:The output of voltageset in the point measure by plug terminal & 50% load.
2. DC voltage:The output of voltageset in the point measure by plug terminal & 50% load. 3. Ripple and noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1 uf and capacitor of 47uf. 3. Ripple and noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1 uf and capacitor of 47uf.
3. Ripple and noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1 uf and capacitor of 47uf. 4. Tolerance: includes set up tolerance, line regulation, load regulation. 4. Tolerance: includes set up tolerance, line regulation, load regulation.
4. Tolerance: includes set up tolerance, line regulation, load regulation. 5. Line regulation is measured from low line to high line at rated load. 5. Line regulation is measured from low line to high line at rated load.
5. Line regulation is measured from low line to high line at rated load. 6. Lengthof set up time is measured at first cold start. Turn on/OFF the supply may lead to increase of the start-up time. 6. Lengthof set up time is measured at first cold start. Turn on/OFF the supply may lead to increase of the start-up time.
6. Lengthof set up time is measured at first cold start. Turn on/OFF the supply may lead to increase of the start-up time. 7. Deratingmay be necessary underlow of the input voltage.Please checkthe of the curve of reduction of power for more details. 7. Deratingmay be necessary underlow of the input voltage.Please checkthe of the curve of reduction of power for more details.
7. Deratingmay be necessary underlow of the input voltage.Please checkthe of the curve of reduction of power for more details. 8. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets 8. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
8. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies." EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies."
EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies." (asavailable in http://www.meanwell.com) (asavailable in http://www.meanwell.com)
(asavailable in http://www.meanwell.com) File name:GS220-SPEC2015-06-01 File name:GS220-SPEC2015-06-01
File name:GS220-SPEC2015-06-01