GS36U09-P1J MEANWELL AC-DC Wall mount adaptor, Output 9VDC / 3.5A, Input USA plug

36W AC-DCIndustrialAdaptorGS36Useries 36W AC-DCIndustrialAdaptorGS36Useries
36W AC-DCIndustrialAdaptorGS36UseriesFeatures : Features :
Features : UniversalAC input / Full range UniversalAC input / Full range
UniversalAC input / Full range Do not load powerconsumptione0.aw Do not load powerconsumptione0.aw
Do not load powerconsumptione0.aw EnergyefficiencyLevelV EnergyefficiencyLevelV
EnergyefficiencyLevelV To comply with EISA 2007 and NRCan To comply with EISA 2007 and NRCan
To comply with EISA 2007 and NRCan 2 pole USA plug 2 pole USA plug
2 pole USA plug Class power(without earthpin) Class power(without earthpin)
Class power(without earthpin) Protections: short circuit / Overload / Over voltage Protections: short circuit / Overload / Over voltage
Protections: short circuit / Overload / Over voltage Pass LPS Pass LPS
Pass LPS Fully enclosed plastic case Fully enclosed plastic case
Fully enclosed plastic case 2 years warranty 2 years warranty
2 years warrantySPECIFICATION SPECIFICATION
SPECIFICATION ORDER NO. ORDER NO.
ORDER NO. GS36U05-P1J GS36U09-P1J GS36U12-P1J GS36U24-P1J GS36U48-P1J GS36U05-P1J GS36U09-P1J GS36U12-P1J GS36U24-P1J GS36U48-P1J
GS36U05-P1J GS36U09-P1J GS36U12-P1J GS36U24-P1J GS36U48-P1J SECURITY MODEL NO. SECURITY MODEL NO.
SECURITY MODEL NO. GS36U05 GS36U05
GS36U05 GS36U09 GS36U09
GS36U09 GS36U12 GS36U12
GS36U12 GS36U24 GS36U24
GS36U24 GS36U48 GS36U48
GS36U48 DC VOLTAGENote.2 5V 9V DC VOLTAGENote.2 5V 9V
DC VOLTAGENote.2 5V 9V 12V 12V
12V 24V 24V
24V 48V 48V
48VOUTPUT OUTPUT
OUTPUT RATED CURRENT CURRENT RANGE RATED POWER (max.) RATED CURRENT CURRENT RANGE RATED POWER (max.)
RATED CURRENT CURRENT RANGE RATED POWER (max.) 4.5A3.5A3A 1.5A0.75A 4.5A3.5A3A 1.5A0.75A
4.5A3.5A3A 1.5A0.75A 0 ~ 4.5 0 ~ 3.5A0 ~ 3A 0 ~ 1.5A0 ~ 0.75 A 0 ~ 4.5 0 ~ 3.5A0 ~ 3A 0 ~ 1.5A0 ~ 0.75 A
0 ~ 4.5 0 ~ 3.5A0 ~ 3A 0 ~ 1.5A0 ~ 0.75 A 22.5W31.5W 36W36W36W 22.5W31.5W 36W36W36W
22.5W31.5W 36W36W36W RIPPLE & NOISE (max.) Note.3 90mVp-p90mVp-p100mVp-p180mVp-p240mVp-p RIPPLE & NOISE (max.) Note.3 90mVp-p90mVp-p100mVp-p180mVp-p240mVp-p
RIPPLE & NOISE (max.) Note.3 90mVp-p90mVp-p100mVp-p180mVp-p240mVp-p VOLTAGE TOLERANCE Note.4 5.0% 5.0% 3.0% 2.0% 2.0% LINE REGULATIONNote.5 1.0% 1.0% 1.0% 1.0% 1.0% LOAD REGULATIONNote.6 5.0% 5.0% 3.0% 2.0% 2.0% VOLTAGE TOLERANCE Note.4 5.0% 5.0% 3.0% 2.0% 2.0% LINE REGULATIONNote.5 1.0% 1.0% 1.0% 1.0% 1.0% LOAD REGULATIONNote.6 5.0% 5.0% 3.0% 2.0% 2.0%
VOLTAGE TOLERANCE Note.4 5.0% 5.0% 3.0% 2.0% 2.0% LINE REGULATIONNote.5 1.0% 1.0% 1.0% 1.0% 1.0% LOAD REGULATIONNote.6 5.0% 5.0% 3.0% 2.0% 2.0% INPUT INPUT
INPUTPROTECTION PROTECTION
PROTECTION ENVIRONMENT ENVIRONMENT
ENVIRONMENTSAFETY & EMC SAFETY AND EMC
SAFETY AND EMC (Note. 7) (Note. 7)
(Note. 7) OTHER CONNECTOR OTHER CONNECTOR
OTHER CONNECTOR The INSTALLATION program, PLACE, TIME VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) The INSTALLATION program, PLACE, TIME VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.)
The INSTALLATION program, PLACE, TIME VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) AC POWER AC POWER
AC POWER Input CURRENT (max.) The LEAKAGE CURRENT(max.) Input CURRENT (max.) The LEAKAGE CURRENT(max.)
Input CURRENT (max.) The LEAKAGE CURRENT(max.)The OVERHEAD of The OVERHEAD of
OVERLOADOVER VOLTAGE WORKING TEMP. OVER VOLTAGE WORKING TEMP.
OVER VOLTAGE WORKING TEMP. OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION
OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION SAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION
SAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION MTBF DIMENSION PACKING PLUG MTBF DIMENSION PACKING PLUG
MTBF DIMENSION PACKING PLUG CABLE CABLE
CABLE 1000ms, 20ms, 50ms/230VAC 1000ms, 20ms, 15ms/115VACat full load 1000ms, 20ms, 50ms/230VAC 1000ms, 20ms, 15ms/115VACat full load
1000ms, 20ms, 50ms/230VAC 1000ms, 20ms, 15ms/115VACat full load 90 ~ 264VAC 135 ~ 370VDC 90 ~ 264VAC 135 ~ 370VDC
90 ~ 264VAC 135 ~ 370VDC 47 ~ 63Hz 47 ~ 63Hz
47 ~ 63Hz 76.5% 81.5% 84.5% 85.5% 87.5% 76.5% 81.5% 84.5% 85.5% 87.5%
76.5% 81.5% 84.5% 85.5% 87.5% 0.7 A / 100VAC 0.7 A / 100VAC
0.7 A / 100VAC 35A / 115VAC 35A / 115VAC
35A / 115VAC 0.25 mA / 240VAC 0.25 mA / 240VAC
0.25 mA / 240VAC 110 ~ 250%rated output power 110 ~ 250%rated output power
110 ~ 250%rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed Protection type : Hiccup mode, recovers automatically after fault condition is removed
Protection type : Hiccup mode, recovers automatically after fault condition is removed 105 ~ 135% rated output voltage 105 ~ 135% rated output voltage
105 ~ 135% rated output voltage Protection type : Clamp by zener diode Protection type : Clamp by zener diode
Protection type : Clamp by zener diode -20 ~ +50 (Refer to "Reduction Curve") -20 ~ +50 (Refer to "Reduction Curve")
-20 ~ +50 (Refer to "Reduction Curve") 20% ~ 90% RH non-condensing 20% ~ 90% RH non-condensing
20% ~ 90% RH non-condensing -20 ~ +85, 10 ~ 95% RH -20 ~ +85, 10 ~ 95% RH
-20 ~ +85, 10 ~ 95% RH 0.03%/(0 ~ 40) 0.03%/(0 ~ 40)
0.03%/(0 ~ 40) 10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes 10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes
10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes UL60950-1,CSA C22.2, BSMI CNS14336 approved UL60950-1,CSA C22.2, BSMI CNS14336 approved
UL60950-1,CSA C22.2, BSMI CNS14336 approved I/P-O/P:4242VDC FROM I/P-O/P:4242VDC FROM
I/P-O/P:4242VDC FROM I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH
I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH The compliance of the FCC PART 15 / CISPR22 class B, CNS13438 class B The compliance of the FCC PART 15 / CISPR22 class B, CNS13438 class B
The compliance of the FCC PART 15 / CISPR22 class B, CNS13438 class B 692.3 Khrs min.MIL-HDBK-217F(25) 692.3 Khrs min.MIL-HDBK-217F(25)
692.3 Khrs min.MIL-HDBK-217F(25) 79*54*33mm (L*W*H) 79*54*33mm (L*W*H)
79*54*33mm (L*W*H) 226g ; 60pcs / 15.5 kg / CARTON 226g ; 60pcs / 15.5 kg / CARTON
226g ; 60pcs / 15.5 kg / CARTON See page 2; Other type available by customer requested See page 2; Other type available by customer requested
See page 2; Other type available by customer requested See page 2; Other type available by customer requested See page 2; Other type available by customer requested
See page 2; Other type available by customer requestedNOTE NOTE
NOTE 1.All parameters are specified at 115VAC input, rated load, 25 70% rh ambient. 1.All parameters are specified at 115VAC input, rated load, 25 70% rh ambient.
1.All parameters are specified at 115VAC input, rated load, 25 70% rh ambient. 2.DC voltage:The output of voltageset in the point measure by plug terminal & 50% load. 2.DC voltage:The output of voltageset in the point measure by plug terminal & 50% load.
2.DC voltage:The output of voltageset in the point measure by plug terminal & 50% load. a.Ripple and noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1 uf and capacitor of 47uf. a.Ripple and noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1 uf and capacitor of 47uf.
a.Ripple and noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1 uf and capacitor of 47uf. 4.Tolerance: includes set up tolerance, line regulation, load regulation. 4.Tolerance: includes set up tolerance, line regulation, load regulation.
4.Tolerance: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 5.Line regulation is measured from low line to high line at rated load.
5.Line regulation is measured from low line to high line at rated load. 6.Loadregulation is measured from 20% to 100% ratedload. 6.Loadregulation is measured from 20% to 100% ratedload.
6.Loadregulation is measured from 20% to 100% ratedload. 7.The power supply is considered as a separate unit, in the end, but the team still needs to re-confirm that the system complies with the 7.The power supply is considered as a separate unit, in the end, but the team still needs to re-confirm that the system complies with the
7.The power supply is considered as a separate unit, in the end, but the team still needs to re-confirm that the system complies with the EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies." EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies."
EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies." (asavailable in http://www.meanwell.com) (asavailable in http://www.meanwell.com)
(asavailable in http://www.meanwell.com) File name:GS36U-SPEC2015-05-20 File name:GS36U-SPEC2015-05-20
File name:GS36U-SPEC2015-05-20