PULSAR-S impulse switch 16A 1NO 1NC 240Vac - GENERAL ELECTRIC - PLS1611240A - 686092 View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

PULSAR-S impulse switch 16A 1NO 1NC 240Vac - GENERAL ELECTRIC - PLS1611240A - 686092





Ship on today

PULSAR-S+ impulse switch 16A 1NO 1NC 240Vac

More details

Energy Meters Control Analizers



* Brand new produt in its original packing covered by the warranties and certifications provided by GENERAL ELECTRIC

Price: $43.47
*This price is per unit and is the net value (not including taxes if applicable).
Up to 35% discount for registered clients.

Request a quote
How it Works

How does the quotation request work?

1 Add the products of your choice to the shopping cart
2 Enter your contact details and submit your request
3 You will be notified by email with our price proposals
4 You can directly process the order for the quotation

There are several options for payment
- Credit card
- Wire Transfer
- PayPal

More info

  • Function:
    Impulse switches are electromechanically controlled switches used to control single- or multi-phase medium-power loads while the control itself can be (very) low power. The device switches between 2 stable positions, each time a (brief) impulse energises its control circuit.

  • Application:
    Mainly used for the switching of lighting and heating equipment and/or to obtain a simplifi ed wiring in case the load needs to be controlled at reduced voltage and/or from more than 2 different places.

  • Features:
    • Besides the normal operation through electrically energising the coil, manual operation is possible at all times, except PLS series SA and SB.
    • The switch position is visualised by the position of the front handle for all devices, except PLS series SA and SB.
    • The central command version was developed to force several devices at the same time to the on or off position, independently of the current status of each individual device. Also in this case, the possibility of operating the device locally remains.
    • The safety terminals are equipped with captive Pozidriv screws and have IP20 protection degree.
    • An add-on auxiliary contact, add-on central-command module and a spacer are available.
    • 3 and 4 poles devices are multi voltage (except all-in central command).
    • The use of a large number of luminous push-buttons is possible.
    • Availability of sealing cap for coil and load terminals.


Status Active


Family Impulse switch - PULSAR S+
Rated switching capacity (A) 16A
Contact combination 1NO 1NC
Coil voltage (V) 240 VAC
0.5:1 (120 Vdc)
Max load of Incandescent lamp & fluor lamp 3000 W
Max load illum circ- No parallel capacitor- fluor lamp 3000 VA
Max load illum circ- capacitor parallel to coil- fluor lamp 2500 VA
Max load illum circ- Parallel compens capacitor- fluor lamp 1800 VA
Rated switching cap 250Vac (1P&2P)/400Vac (3P&4P) 16A
Max electr ballast load Rating of the fuse 20A
Number of modules 1
Standard packing 12
Standards CE;IEC 60669-1;IEC 60669-2-2
Coil Voltage range (in % from Un) 90-110%
Electrical life service Mechanical 2 x 106
Max electr ballast load Max load/phase 20A
Max electr ballast load- Max load at inductive load 30 Vdc 16A
Max electr ballast load Min load/phase at 5V 2 W
Min duration of command impulse (at Un) 0.050 s
Min duration of command impulse (at 90% Un) 0.100 s
Min duration of pause between 2 impulses 0.150 s
Max number of command impulses/minute 250
Rated switching cap Inductive load (at 30Vdc) 16A
Number of mod Drive module 1 mod.
Number of mod With section power contact 2 mod.
Coil Maximum continuous time of coil energisation Unrestricted
Max number of push-buttons Not illum push-buttons Unrestricted
Max number of illum push-buttons with 3 lamps Unrestricted
Max number of illum push-buttons with 2 lamps See technical catalogue
Electrical at full voltage AC-1 4 x 105
Terminal capacity (diameter min/max) 1.5 - 10 mm²
Operating temperature range (min/max) -20°C / +45°C
Coil pick-up power (AC) 14.5 VA
Coil power-loss - AC 11 VA
Coil power-loss - DC 7.5 W


Weight 0.116 kg


ETIM 5.0EC000188
ETIM 6.0EC000188

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
  Add review
Have you got any questions?

If you have any questions, you can visit the following links or contact us via email

Please wait

* Required fields