SFBP03 nVent HOFFMAN Partial swingframe bracket SFBP03

Description:

Enables partial height swing frames to be mounted in floor standing, combinable and compact, steel enclosures enclosures with full access to the enclosure's aperture. The swing frame can be mounted to allow both left and right hand opening.

Material:

3 mm zinc plated steel.

Pack quantity:

1 complete kit for one swing frame.

Mounting requirements:

The SFBP can be used in double door enclosures by means of the VB/CDV divider profile. For depth adjustment use CLPK profiles

Feature:

Zinc plated transversal support bars for 19" partial swing frames mounted within wall mounted and floor standing enclosures.

Advantage:

The transversal support bars allows 19" partial swing frames to be mounted within wall mounted and floor standing enclosures. The swing frame can be adjusted in height by 25 mm increments, within floor standing enclosures.

Benefit:

The support bars provide customers with a strong fixation method for the partial swing frame as it is mounted directly to the enclosures frame or body. Procurement is simplified as the same accessory can be used on both wall mounted and floor standing enclosures.

Comment:

Vertical mounting profiles, AVB, are required to be mounted within wall mounted enclosures before the transversal support bars can be fixed. If the bars require adjustment in depth within floor standing enclosures, then click-in profiles, CLPK, are required.