Product name
Eaton xEnergy Basic other accessory
Product Length/Depth
46.8 millimetre
Product height
65.5 millimetre
Product width
27 millimetre
Product weight
0.072 kilogram
Certifications
IEC 60 947 -7 -1
Product Tradename
xEnergy Basic
Number of poles
Single-pole
Technical Data - Electrical
Voltage rating at AC Cu (IEC) - max
1000 V AC
Voltage rating at DC Cu (IEC) - max
1500 V DC
Rated peak withstand current
2.7 kA
Rated operation current (Ie) Cu (IEC)
63 A
Rated short-time withstand current (Icw)
1.9 kA
Technical Data - Mechanical
Mounting method
Flush mounting
Floor standing distribution board
Surface mounting
Mounting position
Universal
Number of clamp positions per pole
7
Number of clamping units per pole
7
Terminal capacity (single/multi-wire)
2.5 mm² - 6 mm² (outgoing, fine wire (with sleeve))
14 - 10 AWG (outgoing)
2.5 mm² - 16 mm² (outgoing)
2.5 mm² - 16 mm² (outgoing, fine wire (with sleeve))
14 - 10 AWG (outgoing, fine wire (with sleeve))
14 - 4 AWG (incoming)
14 - 6 AWG (outgoing)
2.5 mm² - 16 mm² (incoming)
2.5 mm² - 6 mm² (outgoing)
14 - 6 AWG (outgoing, fine wire (with sleeve))
14 - 4 AWG (incoming, fine wire (with sleeve))
2.5 mm² - 16 mm² (incoming, fine wire (with sleeve))
Conductor cross section (solid, solid-strand) - min
2.5 mm²
Conductor cross section (solid, solid-strand) - max
16 mm²
Clamp material
Brass
Nickel plated
Torque rating
1.5 Nm - 3 Nm / 13.2 lbf - 26.5 lbf (incoming). 0.8 Nm - 3 Nm / 7 lbf - 26.5 lbf (outgoing)
Housing color
Light gray (RAL 7035)
Design verification as per IEC/EN 61439 - technical data
Heat deflection temperature
100 °C
Comparative tracking index (CTI)
600 V
Flame classification (UL 94)
V-0
Functions
Additional equipment
Special features
Clicks on DIN-rail or on base plate.
Save time on wiring.
Save 80% on space used.
Modular construction, 1-4 pole Systems can be built with several blocks.
Material, hexagon socket set screw: Steel
This power distribution block is suitable for ALU and CU conductors.
Please pay attention to the common handling guidelines when connecting the aluminium conductors.
Clean and brush the contact surfaces and lubricate them with an appropriate grease.
As precaution the connections should get retightened regularly.
Zinc plated (Hexagon socket set screw, Surface finish)