EASY500-POW 110941 EATON MOELLER Switched-mode power supply unit, 100-240VAC/24VDC, 2.5A, 1-phase, controlled View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

EASY500-POW 110941 EATON MOELLER Switched-mode power supply unit, 100-240VAC/24VDC, 2.5A, 1-phase, controlled

EASY500-POW

110941

EATON - MOELLER

Available

Ship on today

Switched-mode power supply unit, 100-240VAC/24VDC, 2.5A, 1-phase, controlled

More details


Programmable Logic Controllers Plcs

Power supplies - EATON - MOELLER

Power supplies - EATON - MOELLER

* Brand new produt in its original packing covered by the warranties and certifications provided by EATON - MOELLER

*This price is per unit and is the net value (not including taxes if applicable).

How it Works

How does this work?

1 Add the products of your choice to the shopping cart
2 Enter your contact details and submit your request
3 You will be notified by email with a quotation
4 From the quotation simply finish your order and you will receive the products

There are several options for payment
- Credit card
- Wire Transfer
- PayPal


Related products

More info



Delivery programme
Product range
  Control relays easyRelay
Multi-function-display MFD-Titan
Product range
  Switched-mode power supply units easyPOW
Description
  primary chopper
controlled
Phases
  Single-phase
Input voltage range
  85 - 264 V AC
Nominal input voltage
  100 - 240 V AC
Rated output voltage
  24 V DC (± 3%)
Rated output current
 A2.5
For use with
  easy500
easy700
easy800
MFD-CP8
EC4P
ES4P
Technical data
General
Standards
  EN 55011, EN 55022, IEC/EN 61000-4, IEC 60068-2-6, IEC 60068-2-27
Dimensions (W x H x D)
 mm71.5 (4 PE) x 90 x 58
Weight
 kg0.28
Mounting
  Top-hat rail IEC/EN 60715, 35 mm or screw fixing using fixing brackets ZB4-101-GF1 (accessories)
Terminal capacities
Solid
 mm20.2/4 (AWG 22 - 12)
Flexible with ferrule
 mm20.2/2.5 (AWG 22 - 12)
Standard screwdriver
 mm3.5 x 0.8
Max. tightening torque
 Nm0.6
Climatic environmental conditions
Operating ambient temperature
 °C-25 to 55, cold as per IEC 60068-2-1, heat as per IEC 60068-2-2
Condensation
  Take appropriate measures to prevent condensation
Storage
 °C- 40 - 70
Relative humidity, non-condensing (IEC/EN 60068-2-30)
 % 
Air humidity, non-condensing, min.
 %5
Air humidity, non-condensing, max.
 %95
Air pressure (operation)
 hPa795 - 1080
Max. installation altitude above sea level, observe derating with higher altitudes
 m2000
Ambient conditions, mechanical
Protection type (IEC/EN 60529, EN50178, VBG 4)
  IP20
Vibrations (IEC/EN 60068-2-6)
 Hz 
Constant amplitude 0.15 mm
 Hz10 - 57
Constant acceleration 2 g
 Hz57 - 150
Mechanical shock resistance (IEC/EN 60068-2-27) semi-sinusoidal 15 g/11 ms
 Impacts18
Drop to IEC/EN 60068-2-31
Drop heightmm50
Free fall, packaged (IEC/EN 60068-2-32)
 m1
Mounting position
  Horizontal, terminals top
Electromagnetic compatibility (EMC)
Electrostatic discharge (IEC/EN 61000-4-2, Level 3, ESD)
 kV 
Air discharge
 kV8
Contact discharge
 kV6
Electromagnetic fields (RFI) to IEC EN 61000-4-3
 V/m10
Radio interference suppression
  EN 55011 Class B, EN 55022 Class B
Burst pulses (IEC/EN 61000-4-4, level 3)
 kV2
Power pulses (surge) (IEC/EN 61000-4-5)
 kV2 (supply cables, symmetrical)
High-energy pulses (surge) (IEC/EN 61000-4-5, level 2), 24 V
 kV0.5 (outgoer cables symmetrical, EASY…DC)
Immunity to line-conducted interference to (IEC/EN 61000-4-6)
 V10
Surge voltage (EN 50178), 24 V
 kV6
Insulation resistance
Clearance in air and creepage distances
  EN 50178
Insulation resistance
  EN 50178
Protection class Uout to Uin
  Class II to IEC 60536
Potential isolation primary/secondary
  Yes, SELV (VDE 0100 Part 410; IEC 60364-4-41, HD 384.4.41 S2) EN 60950, EN 50178
Input voltage
Rated input voltage DC
 V100/120/230/240 (-15/+10 %)
Protective switches AC
  FAZ-C2/1 oder FAZ-B6/1
Rated input voltage DC
 V DC85 264
DC protective switches
  FAZ-C2/1-DC
Voltage range
 V AC85 - 264
Frequency range
 Hz47 - 63
Mains failure bridging 115/230 V (IEC/EN 61000-4-11)
 ms> 20/> 40
Fuse 115/230 V
 A2/1 slow
Rating data
Efficiency
 %> 85
Power consumption
 WNormally 70
Power loss
PWNormally 10
Input current
Input current nominal 115/240 V
 AApprox. 0.8/0.4
Inrush current at 25 °C 230 V
 A< 30
Output voltage
24 V DC
   
Rated value
 V DC24
Tolerance
 %± 3
Switching peaks 115/230
 mVPP< 5
Effect of input voltage
 %± 1
Effect with 25 - 100 % load change
 %± 2
Can be connected in parallel to increase power
  Yes
Output current
24 V DC
   
Output current
 A0 - 2.5
Effectiveness of current limitation
 A> 2.8
Reduction of output voltage after current limitation
 V< 18
Overload proof
  Yes, by current limitation
Proof against sustained short circuit
  Yes, hickup mode, approx. 2 Hz
Displays
Indication of output voltage (LED, continuous green light = OK)
 V DC24
Design verification as per IEC/EN 61439(Show features)(Hide features)
Technical data for design verification
   
Rated operational current for specified heat dissipation
InA0
Heat dissipation per pole, current-dependent
PvidW0
Equipment heat dissipation, current-dependent
PvidW0
Static heat dissipation, non-current-dependent
PvsW10
Heat dissipation capacity
PdissW0
Operating ambient temperature min.
 °C-25
Operating ambient temperature max.
 °C55
IEC/EN 61439 design verification
   
10.2 Strength of materials and parts
   
10.2.2 Corrosion resistance
  Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures
  Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat
  Meets the product standard's requirements.
10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
  Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation
  Meets the product standard's requirements.
10.2.5 Lifting
  Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact
  Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions
  Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES
  Meets the product standard's requirements.
10.4 Clearances and creepage distances
  Meets the product standard's requirements.
10.5 Protection against electric shock
  Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
  Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
  Is the panel builder's responsibility.
10.8 Connections for external conductors
  Is the panel builder's responsibility.
10.9 Insulation properties
   
10.9.2 Power-frequency electric strength
  Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage
  Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material
  Is the panel builder's responsibility.
10.10 Temperature rise
  The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
  Is the panel builder's responsibility.
10.12 Electromagnetic compatibility
  Is the panel builder's responsibility.
10.13 Mechanical function
  The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Technical data ETIM 6.0(Show features)(Hide features)
PLC's (EG000024) / PLC system power supply (EC000599)
Electric engineering, automation, process control engineering / Control / Programmable logic control (SPS) / SPS system power supply ([email protected] [AKE532011])
Input voltage at AC 50 Hz
 V85 - 264
Input voltage at AC 60 Hz
 V85 - 264
Input voltage at DC
 V0 - 0
Type of voltage (input voltage)
  AC
Max. input current AC 50 Hz
 A0
Max. input current AC 60 Hz
 A0
Max. input current DC
 A0
Type of output voltage
  DC
Output voltage at AC 50 Hz
 V0 - 0
Output voltage at AC 60 Hz
 V0 - 0
Output voltage at DC
 V0 - 0
Max. output current AC 50 Hz
 A0
Max. output current AC 60 Hz
 A0
Max. output current DC
 A2.5
Redundancy
  No
Suitable for safety functions
  No
Width
 mm72
Height
 mm90
Depth
 mm60
Approvals
Product Standards  IEC/EN see Technical Data; UL 508; CSA C22.2 No. 107.1-01; CE marking
UL File No.  E300415
UL Category Control No.  NMTR, NMTR7
CSA File No.  UL report applies to both US and Canada
CSA Class No.  3211-87, 3211-07
North America Certification  UL listed, certified by UL for use in Canada
Degree of Protection  IEC: IP20, UL/CSA Type: -
Dimensions
IL05012003Z (AWA2727-1869) Power supply unit
 
>>

Datasheet - PDF

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review
Have you got any questions?

If you have any questions, you can visit the following links or contact us via email

Please wait





* Required fields

or