Cart
0
Product
Products
(empty)
No products
$0.00
Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart.
There is 1 item in your cart.
Total products
Total
View larger
M22-SWD-K22LEDC-B 116010 M22-SWD-K22LEDC-BQ EATON ELECTRIC Illuminated pushbutton function element, SmartWir..
M22-SWD-K22LEDC-B
116010
M22-SWD-K22LEDC-BQ
EATON-MOELLER
Illuminated pushbutton function element, SmartWire-DT, 2W, LED, blue, base fixing
M22-SWD-K22LEDC-B
Function element, for combination with RMQ-Titan operating elements M22-..., 2 changeover contact, Base fixing, blue
Low-voltage industrial components > Auxiliary contact block
Auxiliary Control and Signalling Elements
* Brand new product in its original packaging covered by the warranties and certifications provided by EATON-MOELLER
More info
▲Function element, for combination with RMQ-Titan operating elements M22-..., 2 changeover contact, Base fixing, blue
Function element, Fixing: Base fixing, Connection to SmartWire-DT: yes
Delivery program
Basic function accessories
Function elements
Function
for combination with RMQ-Titan operating elements M22-...
Contacts
2 changeover contact
Fixing
Base fixing
Contact sequence
Contact travel diagram
stroke in connection with front element
stroke in connection with front element
Configuration
Colour
Connection to SmartWire-DT
yes
Technical data
General
Standards
IEC/EN 61131-2
EN 50178
EN 50178
Dimensions (W x H x D)
17 x 45 x 42 mm
Weight
14 g
Mounting position
As required
Ambient conditions, mechanical
Protection type (IEC/EN 60529, EN50178, VBG 4)
IP20
Vibrations (IEC/EN 61131-2:2008)Constant amplitude 3,5 mm
5 - 8.4 Hz
Vibrations (IEC/EN 61131-2:2008)Constant acceleration 1 g
8.4 - 150 Hz
Mechanical shock resistance (IEC/EN 60068-2-27) semi-sinusoidal 15 g/11 ms
9 Impacts
Drop to IEC/EN 60068-2-31 [Drop height]
50 mm
Free fall, packaged (IEC/EN 60068-2-32)
0.3 m
Electromagnetic compatibility (EMC)
Overvoltage category
Not applicable
Pollution degree
2
Electrostatic discharge (IEC/EN 61131-2:2008)Air discharge (Level 3)
8 kV
Electrostatic discharge (IEC/EN 61131-2:2008)Contact discharge (Level 2)
4 kV
Electromagnetic fields (IEC/EN 61131-2:2008)80 - 1000 MHz
10 V/m
Electromagnetic fields (IEC/EN 61131-2:2008)1.4 - 2 GHz
3 V/m
Electromagnetic fields (IEC/EN 61131-2:2008)2 - 2.7 GHz
1 V/m
Radio interference suppression (SmartWire-DT)
EN 55011 Class A
Burst (IEC/EN 61131-2:2008, Level 3)Supply cable
2 kV
Burst (IEC/EN 61131-2:2008, Level 3)SmartWire-DT cable
1 kV
Radiated RFI (IEC/EN 61131-2:2008, Level 3)
10 V
Climatic environmental conditions
Ambient temperatureOperating ambient temperature (IEC 60068-2)
-30 - +55 °C
Ambient temperatureStorage
- 40 - + 80 °C
Relative humidityCondensation
Take appropriate measures to prevent condensation
Relative humidityRelative humidity, non-condensing (IEC/EN 60068-2-30)
5 - 95 %
SmartWire-DT network
Station type
SmartWire-DT slave
Address allocation
automatic
Status indication
Green LED
Connections
Plug, 8-pole
Plug connector
M22-SWD-I…LP
Fieldbus interface
Baud rate setting
automatic
Functions
Switching state display
Yes LED
Diagnostics
Yes
Fixing
Base fixing
Design verification as per IEC/EN 61439
Technical data for design verification
Rated operational current for specified heat dissipation [In]
0 A
Heat dissipation per pole, current-dependent [Pvid]
0 W
Equipment heat dissipation, current-dependent [Pvid]
0 W
Static heat dissipation, non-current-dependent [Pvs]
0.3 W
Heat dissipation capacity [Pdiss]
0 W
Operating ambient temperature min.
-30 °C
Operating ambient temperature max.
+55 °C
IEC/EN 61439 design verification
10.2 Strength of materials and parts10.2.2 Corrosion resistance
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.4 Resistance to ultra-violet (UV) radiation
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.5 Lifting
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts10.2.6 Mechanical impact
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts10.2.7 Inscriptions
Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES
Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances
Meets the product standard's requirements.
10.5 Protection against electric shock
Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
Is the panel builder's responsibility.
10.8 Connections for external conductors
Is the panel builder's responsibility.
10.9 Insulation properties10.9.2 Power-frequency electric strength
Is the panel builder's responsibility.
10.9 Insulation properties10.9.3 Impulse withstand voltage
Is the panel builder's responsibility.
10.9 Insulation properties10.9.4 Testing of enclosures made of insulating material
Is the panel builder's responsibility.
10.10 Temperature rise
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Technical data ETIM 7.0
Low-voltage industrial components (EG000017) / Auxiliary contact block (EC000041)
Electric engineering, automation, process control engineering / Low-voltage switch technology / Component for low-voltage switching technology / Auxiliary switch block ([email protected] [AKN342013])
Number of contacts as change-over contact
0
Number of contacts as normally open contact
2
Number of contacts as normally closed contact
2
Number of fault-signal switches
0
Rated operation current Ie at AC-15, 230 V
0 A
Type of electric connection
Flat plug-in connection
Model
Top mounting
Mounting method
Front fastening
Lamp holder
LED not exchangeable
Approvals
UL File No.
E29184
UL Category Control No.
NKCR
CSA File No.
2324643
CSA Class No.
3211-07
North America Certification
UL listed, CSA certified
Specially designed for North America
No
Datasheet - PDF
▲| Title: | Size: | Type: |
|---|---|---|
| PDF EATON COMMAND INDICATION EN.pdf | 23 Mbytes |
|
| M22-SWD-K22LEDC-B M22-SWD-K22LEDC-BQ 116010 EN_116010.pdf | 240 Kbytes |
|
Reviews (0) ▲
No customer reviews for the moment.
Add Review
hide form
| Rating: |
|
| Name: | |
| Email: | |
| Subject: | |
| Text: | |
| Do you recommend this product to buy? | |
|
|
|
| Add review | |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.