> >>DX-LM3-260 269561 ELECTRIC Motor choke, AC, 3p, 260A, 0.15mH, 750V50/60Hz
Previous Product Next Product
DX-LM3-260 269561 EATON ELECTRIC Motor choke, AC, 3p, 260A, 0.15mH, 750V50/60Hz View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

DX-LM3-260 269561 EATON ELECTRIC Motor choke, AC, 3p, 260A, 0.15mH, 750V50/60Hz

DX-LM3-260

269561

EATON-MOELLER

Motor choke, AC, 3p, 260A, 0.15mH, 750V50/60Hz

DX-LM3-260

Motor choke, three-phase, 750 V + 0% (0 - 400 Hz), V AC, 260 A, 0.15 mH

More details


Low-voltage industrial components > Coil for low-voltage

Eaton Frequency Converters

* Brand new product in its original packaging covered by the warranties and certifications provided by EATON-MOELLER

Total price: $1,526.59
Unit price: $1,526.59

*This price is per unit and is the net value (not including taxes if applicable).

If our price is not the best, please ask us for a quote. Ask for a quotation

More info

▲


Motor choke, three-phase, 750 V + 0% (0 - 400 Hz), V AC, 260 A, 0.15 mH
Three-phase motor choke max. permissible mains voltage 750V AC rated operational current 260A reactor 0.15mH

Delivery program

Product range
Accessories
Accessories
Motor chokes
Description
three-phase
For use with
DA1, DG1, SVX, SPX
Max. permissible connection voltage
750 V + 0% (0 - 400 Hz) V AC
Rated operational current [Ie]
260 A
Inductance [L]
0.15 mH
max. heat dissipation (pulse frequency)
(12 kHz) [Pv]
520 W

Technical data

General
Standards
IEC/EN 61558-2-20-2000, VDE 0570 Part 2-20/2001-04, UL, CSA
Operating temperature
-25 to +40, up to 70 with current derating (see the note) °C
Storage temperature [ϑ]
-25 - +85 °C
Mechanical shock resistance
11 ms2/15
3 shocks g
Vibration resistance
1 (0 - 150 Hz) g
Vibration
0.35 mm at 10 - 55 Hz
Altitude
0 – 1000 above sea level, up to 5000 with current reduction (see notes) m
Mounting position
Standing vertically, suspended horizontally
Free surrounding areas
< 50 MM
Degree of Protection
IP00 (connection lugs)
Rated duty factor
100 % DF
Weight
45 kg
Electrical data
Rated operational voltage
3 AC 400 V
Max. supply voltage
750 V + 0% (0 - 400 Hz) V AC
Operating frequency [f]
0…400 Hz
Insulation class
F
Rated operational current [Ie]
260 A
Inductance [L]
0.15 mH
max. heat dissipation (pulse frequency)(3 kHz) [Pv]
358 W
max. heat dissipation (pulse frequency)(5 kHz) [Pv]
526 W
max. heat dissipation (pulse frequency)(12 kHz) [Pv]
520 W
Connection
Connection lugs
✓
PE stud
✓
Connection lug
Cu 40 x 5 mm2
Drilling
14 mm
Tightening torque
15.5 Nm
Notes

The following applies for the installation altitude: Derating with respect to the rated operational current Ie:

Design verification as per IEC/EN 61439

Technical data for design verification
Rated operational current for specified heat dissipation [In]
260 A
Heat dissipation per pole, current-dependent [Pvid]
0 W
Equipment heat dissipation, current-dependent [Pvid]
358 W
Static heat dissipation, non-current-dependent [Pvs]
0 W
Heat dissipation capacity [Pdiss]
0 W
Operating ambient temperature min.
-25 °C
Operating ambient temperature max.
+40 °C
IEC/EN 61439 design verification
10.2 Strength of materials and parts10.2.2 Corrosion resistance
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.4 Resistance to ultra-violet (UV) radiation
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.5 Lifting
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts10.2.6 Mechanical impact
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts10.2.7 Inscriptions
Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES
Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances
Meets the product standard's requirements.
10.5 Protection against electric shock
Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
Is the panel builder's responsibility.
10.8 Connections for external conductors
Is the panel builder's responsibility.
10.9 Insulation properties10.9.2 Power-frequency electric strength
Is the panel builder's responsibility.
10.9 Insulation properties10.9.3 Impulse withstand voltage
Is the panel builder's responsibility.
10.9 Insulation properties10.9.4 Testing of enclosures made of insulating material
Is the panel builder's responsibility.
10.10 Temperature rise
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.

Technical data ETIM 7.0

Low-voltage industrial components (EG000017) / Coil for low-voltage (EC002563)
Electric engineering, automation, process control engineering / Electronic coil and filter / Electronic choke coil / Electronic choke coil (unspecified) ([email protected] [ADJ199007])
Suitable as interference suppression reactance coil
No
Suitable as net reactance coil
No
Suitable as commutation reactance coil
No
Suitable as ripple filter choke
Yes
Suitable as output reactance coil
No
Number of poles, primary side
3
Rated clock frequency
0 kHz
Rated operation frequency
0 - 200 Hz
Max. rated operation voltage Ue
750 V
Rated current at AC
260 - 260 A
Max. rated current (Ith) at rated voltage DC
260 A
Rated inductance
0.15 mH
Degree of protection (IP)
IP00
Relative short circuit voltage
0 %
Resonance frequency
0 Hz
Degree of protection (NEMA)
Other

Approvals

Product Standards
UL 508C; CSA-C22.2 No. 14; IEC/EN61800-3; IEC/EN61800-5; CE marking
UL File No.
E167225
UL Category Control No.
XPTQ2, XPTQ8
CSA File No.
UL report applies to both US and Canada
North America Certification
UL listed, certified by UL for use in Canada
Specially designed for North America
No
Suitable for
Branch circuits
Max. Voltage Rating
1~ 240 V AC IEC: TN-S UL/CSA: "Y" (Solidly Grounded Wey), 3~ 240 V AC IEC: TN-S UL/CSA: "Y" (Solidly Grounded Wey), 3~ 480 V AC IEC: TN-S UL/CSA: "Y" (Solidly Grounded Wey)
Degree of Protection
IEC: IP00

Dimensions

824X087
Height tolerance depends on gap
The position of connection lugs U2-V2-W2 depends on the coil material and can deviate from the position illustrated here.
¹⁾ Toleranz in Abhängigkeit vom Luftspalt.
The position of connection lugs U2-V2-W2 depends on the coil material and can deviate from the position illustrated here.

Datasheet - PDF

▲
Title: Size: Type:
PDF EATON STARTING CONTROLLING MOTORS EN.pdf 32 Mbytes
DX-LM3-260 DX-LM3-260 269561 EN_269561.pdf 273 Kbytes DX-LM3-260 DX-LM3-260 269561 EN_269561.pdf

Reviews (0) ▲

No customer reviews for the moment.

Add Review
Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
Do you recommend this product to buy?
  Captcha
  Add review

Latest Customer Reviews

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.