Product name
Eaton Moeller series NZM operating element
Product Length/Depth
190 millimetre
Product height
110 millimetre
Product width
120 millimetre
Product weight
0.989 kilogram
Compliances
IEC
UL/CSA
RoHS conform
Certifications
CSA certified
CSA-C22.2 No. 5-09
UL (File No. E140305)
CE marking
IEC60947
UL (Category Control Number DIHS)
UL489
CSA (Class No. 1437-01)
UL listed
CSA (File No. 22086)
Product Sub Type
Operating element
Type
Accessory
Main switch assembly kit for side panel mounting
Features
Actuation of the switch on the control panel side wall
Red-yellow for emergency switching off
Lockable
Switch mounting on mounting plate
Special features
External warning plate/designation label can be clipped on.
For enhanced busbar tag shroud on the incomer side, please order IP2X protection against contact with a finger.
Kit for use as a main switch
Fitted with:
Black and yellow lightning symbol
NZM...-XV4 extension shaft
External warning plate/marking plate in German/English
Door coupling rotary handle
Extension shaft
Padlock
Suitable for
Switch disconnector
Power circuit breaker
Emergency stop
Used with
N(S)2(-4)
NZM2(-4)
PN2(-4)
Technical Data - Mechanical
Cover/door type
Door interlock lockable in the 0 position using up to 3 padlocks on the handle
Degree of protection / NEMA enclosure type
IP66
4X. 12
Activation type
Actuation on the right
Special features
External warning plate/designation label can be clipped on.
For enhanced busbar tag shroud on the incomer side, please order IP2X protection against contact with a finger.
Kit for use as a main switch
Design verification as per IEC/EN 61439
10.2.2 Corrosion resistance
Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard's requirements.
10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects
Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation
Meets the product standard's requirements.
10.2.5 Lifting
Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact
Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions
Meets the product standard's requirements.
10.3 Degree of protection of assemblies
Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances
Meets the product standard's requirements.
10.5 Protection against electric shock
Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
Is the panel builder's responsibility.
10.8 Connections for external conductors
Is the panel builder's responsibility.
10.9.2 Power-frequency electric strength
Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage
Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material
Is the panel builder's responsibility.
10.10 Temperature rise
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.