Cart
0
Product
Products
(empty)
No products
$0.00
Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart.
There is 1 item in your cart.
Total products
Total
View larger
CI-PKZ01-SVB 281405 XTPBXENCSLO65 EATON ELECTRIC Insulated enclosure, for PKZ01, +padlocking feature yellow
CI-PKZ01-SVB
281405
XTPBXENCSLO65
EATON-MOELLER
Insulated enclosure, for PKZ01, +padlocking feature yellow
CI-PKZ01-SVB
Low-voltage industrial components > Empty enclosure for switchgear
Motor-protective circuit-breakers PKZ (Accessories)
* Brand new product in its original packaging covered by the warranties and certifications provided by EATON-MOELLER
More info
▲Insulated enclosure, for PKZ01, +padlocking feature yellow
Insulated enclosure for PKZM01, degree of protection IP65 integrated terminal for PE(N) connection., Can be locked in O position, top and bottom 2 M25 knockout cable entries each
General specifications
Product name
Eaton Moeller® series CI Insulated enclosure
Part no.
CI-PKZ01-SVB
EAN
4015082814052
Product Length/Depth
130 millimetre
Product height
158 millimetre
Product width
80 millimetre
Product weight
0.3 kilogram
Compliances
Contact Manufacturer
Certifications
CE
Product Tradename
CI
Product Type
Insulated enclosure
Product Sub Type
None
Features & Functions
Enclosure material
Plastic
Features
Can be locked in 0 position
Fitted with:
PE(N) terminal
Knockouts
2 x M20 (cable entry knockouts at the rear)
2 x M25 (cable entry knockout with thread at the bottom)
2 x M25 (cable entry knockout with thread at the top)
Hard mirror with cable entry knockouts (can be cut out)
2 x M25 (cable entry knockout with thread at the bottom)
2 x M25 (cable entry knockout with thread at the top)
Hard mirror with cable entry knockouts (can be cut out)
General information
Degree of protection
IP65
NEMA Other
NEMA Other
Model
Surface mounting
Product category
Accessories
Suitable for
Emergency stop
Used with
PKZ01
Climatic environmental conditions
Ambient operating temperature - min
-25 °C
Ambient operating temperature - max
70 °C
Design verification
Equipment heat dissipation, current-dependent Pvid
0 W
Heat dissipation capacity Pdiss
10 W
Heat dissipation per pole, current-dependent Pvid
0 W
Rated operational current for specified heat dissipation (In)
0 A
Static heat dissipation, non-current-dependent Pvs
0 W
10.2.2 Corrosion resistance
Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard's requirements.
10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects
Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation
Please enquire
10.2.5 Lifting
Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact
Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions
Meets the product standard's requirements.
10.3 Degree of protection of assemblies
Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances
Meets the product standard's requirements.
10.5 Protection against electric shock
Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
Is the panel builder's responsibility.
10.8 Connections for external conductors
Is the panel builder's responsibility.
10.9.2 Power-frequency electric strength
Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage
Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material
Is the panel builder's responsibility.
10.10 Temperature rise
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Technical data ETIM 9.0
Low-voltage industrial components (EG000017) / Empty enclosure for switchgear (EC000712)
Electric engineering, automation, process control engineering / Low-voltage switch technology / Component for low-voltage switching technology / Empty housing for switch devices (ecl@ss13-27-37-13-01 [AKN343019])
Housing material
Plastic
Width
80 mm
Height
158 mm
Depth
130 mm
With transparent cover
No
Suitable for emergency stop
Yes
Model
Surface mounting
Degree of protection (IP)
IP65
Degree of protection (NEMA)
Other
Datasheet - PDF
▲| Title: | Size: | Type: |
|---|---|---|
| PDF EATON SWITCHING PROTECTING MOTORS EN.pdf | 34 Mbytes |
|
| CI-PKZ01-SVB XTPBXENCSLO65 281405 EN_281405.pdf | 112 Kbytes |
|
Reviews (0) ▲
No customer reviews for the moment.
Add Review
hide form
| Rating: |
|
| Name: | |
| Email: | |
| Subject: | |
| Text: | |
| Do you recommend this product to buy? | |
|
|
|
| Add review | |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.