DIL-SWD-32-002 118561 EATON MOELLER Function element, contactor, SmartWire-DT, DIL/MSC, manual/auto View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

DIL-SWD-32-002 118561 EATON MOELLER Function element, contactor, SmartWire-DT, DIL/MSC, manual/auto

DIL-SWD-32-002

118561

EATON - MOELLER

Available

Ship on today

Function element, contactor, SmartWire-DT, DIL/MSC, manual/auto

More details


Programmable Relays

SmartWire-DT

SmartWire-DT - EATON - MOELLER

* Brand new produt in its original packing covered by the warranties and certifications provided by EATON - MOELLER

QuantityPrice
1+$51.05
4+$47.91
7+$46.97
10+$46.45
14+$46.01
*This price is per unit and is the net value (not including taxes if applicable).

How it Works

How does this work?

1 Add the products of your choice to the shopping cart
2 Enter your contact details and submit your request
3 You will be notified by email with a quotation
4 From the quotation simply finish your order and you will receive the products

There are several options for payment
- Credit card
- Wire Transfer
- PayPal


Related products

More info



Delivery programme
Product range
  SmartWire-DT slave
Accessories
  SWD contactor modules
Function
  For connecting the contactors to SmartWire-DT
Description
  Per contactor 1 module necessary.
1-0-A switch for manual or automatic operation.
Messages
  Contactor switching position, status of the digital inputs 1 and 2, 1-0-A switch position
Commands
  Contactor actuation
Connection to SmartWire-DT
  yes
For use with
  DILM(C)7… - DILM(C)32
DILM38
DILA
MSC-D(E)-...(24VDC)
Setting
  Rotary switch
Notes 

For current consumption of the contactor coils > 3 A (UL: 2 A) use additional power feed module.

A2 connections must not be bridged.

Wiring sets DILM 12-XRL and PKZM0-XRM12 cannot be used.

Connection terminals for electrical interlocking are not suitable for safety technology.

Technical data
General
Standards
  IEC/EN 61131-2
EN 50178
IEC/EN 60947
Dimensions (W x H x D)
 mm45 x 38 x 76
Weight
 kg0.04
Mounting
  on DILM7…DILM38
Mounting position
  as DILM7 to DILM38
Ambient conditions, mechanical
Protection type (IEC/EN 60529, EN50178, VBG 4)
  IP20
Vibrations (IEC/EN 61131-2:2008)
   
Constant amplitude 3,5 mm
 Hz5 - 8.4
Constant acceleration 1 g
 Hz8.4 - 150
Mechanical shock resistance (IEC/EN 60068-2-27) semi-sinusoidal 15 g/11 ms
 Impacts9
Drop to IEC/EN 60068-2-31
Drop heightmm50
Free fall, packaged (IEC/EN 60068-2-32)
 m0.3
Electromagnetic compatibility (EMC)
Overvoltage category
  II
Pollution degree
  2
Electrostatic discharge (IEC/EN 61131-2:2008)
   
Air discharge (Level 3)
  kV8
Contact discharge (Level 2)
  kV4
Electromagnetic fields (IEC/EN 61131-2:2008)
   
80 - 1000 MHz
 V/m10
1.4 - 2 GHz
 V/m3
2 - 2.7 GHz
 V/m1
Radio interference suppression (SmartWire-DT)
  EN 55011 Class A
Burst (IEC/EN 61131-2:2008, Level 3)
   
CAN/DP bus cable
 kV1
SmartWire-DT cables
 kV1
Radiated RFI (IEC/EN 61131-2:2008, Level 3)
 V10
Climatic environmental conditions
Operating ambient temperature (IEC 60068-2)
  °C- 25 - +60
Condensation
  Take appropriate measures to prevent condensation
Storage
 °C- 30 - 70
Relative humidity, non-condensing (IEC/EN 60068-2-30)
 %5 - 95
SmartWire-DT network
Station type
  SmartWire-DT slave
Address allocation
  automatic
SmartWire-DT status LED
 LEDgreen/orange
Connections
  Plug, 8-pole
Plug connectors
  External device plug SWD4-8SF2-5
Current consumption
 mA40
Pick-up power
   
for DILM 7-9
 W3
for DILM 12-15
 W4.5
for DILM 17-38
 W12
Pick-up current
   
for DILM 7-9
 mA125
for DILM 12-15
 mA188
for DILM 17-38
 mA500
Holding power
   
for DILM 7-9
 W3
for DILM 12-15
 W4.5
for DILM 17-38
 W0.5
Holding current
   
for DILM 17-38
 mA21
for DILM 12-15
 mA188
for DILM 7-9
 mA125
Mode parameter
Manual/automatic mode
  yes
Setting
  viaRotary switch
Connection auxiliary contact
Number
  2
Rated voltage
UeV DC15
Input current at 1 signal, typical
 mA3
Potential isolation
  No
Cable length
 m
Technical data for design verification
   
Rated operational current for specified heat dissipation
InA0
Heat dissipation per pole, current-dependent
PvidW0
Equipment heat dissipation, current-dependent
PvidW0
Static heat dissipation, non-current-dependent
PvsW0.8
Heat dissipation capacity
PdissW0
Operating ambient temperature min.
 °C-25
Operating ambient temperature max.
 °C60
IEC/EN 61439 design verification
   
10.2 Strength of materials and parts
   
10.2.2 Corrosion resistance
  Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures
  Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat
  Meets the product standard's requirements.
10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
  Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation
  Meets the product standard's requirements.
10.2.5 Lifting
  Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact
  Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions
  Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES
  Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances
  Meets the product standard's requirements.
10.5 Protection against electric shock
  Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
  Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
  Is the panel builder's responsibility.
10.8 Connections for external conductors
  Is the panel builder's responsibility.
10.9 Insulation properties
   
10.9.2 Power-frequency electric strength
  Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage
  Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material
  Is the panel builder's responsibility.
10.10 Temperature rise
  The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
  Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility
  Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function
  The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Technical data ETIM 6.0(Show features)(Hide features)
PLC's (EG000024) / Fieldbus, decentr. periphery - digital I/O module (EC001599)
Electric engineering, automation, process control engineering / Control / Field bus, decentralized peripheral / Field bus, decentralized peripheral - digital I/O module ([email protected] [BAA055011])
Supply voltage AC 50 Hz
 V0 - 0
Supply voltage AC 60 Hz
 V0 - 0
Supply voltage DC
 V15 - 15
Voltage type of supply voltage
  DC
Number of digital inputs
  2
Number of digital outputs
  1
Digital inputs configurable
  No
Digital outputs configurable
  No
Input current at signal 1
 mA3
Permitted voltage at input
 V15 - 15
Type of voltage (input voltage)
  DC
Type of digital output
  -
Output current
 A0.5
Permitted voltage at output
 V20.4 - 28.8
Type of output voltage
  DC
Short-circuit protection, outputs available
  No
Number of HW-interfaces industrial Ethernet
  0
Number of HW-interfaces PROFINET
  0
Number of HW-interfaces RS-232
  0
Number of HW-interfaces RS-422
  0
Number of HW-interfaces RS-485
  0
Number of HW-interfaces serial TTY
  0
Number of HW-interfaces parallel
  0
Number of HW-interfaces Wireless
  0
Number of HW-interfaces other
  1
With optical interface
  No
Supporting protocol for TCP/IP
  No
Supporting protocol for PROFIBUS
  No
Supporting protocol for CAN
  No
Supporting protocol for INTERBUS
  No
Supporting protocol for ASI
  No
Supporting protocol for KNX
  No
Supporting protocol for MODBUS
  No
Supporting protocol for Data-Highway
  No
Supporting protocol for DeviceNet
  No
Supporting protocol for SUCONET
  No
Supporting protocol for LON
  No
Supporting protocol for PROFINET IO
  No
Supporting protocol for PROFINET CBA
  No
Supporting protocol for SERCOS
  No
Supporting protocol for Foundation Fieldbus
  No
Supporting protocol for EtherNet/IP
  No
Supporting protocol for AS-Interface Safety at Work
  No
Supporting protocol for DeviceNet Safety
  No
Supporting protocol for INTERBUS-Safety
  No
Supporting protocol for PROFIsafe
  No
Supporting protocol for SafetyBUS p
  No
Supporting protocol for other bus systems
  Yes
Radio standard Bluetooth
  No
Radio standard WLAN 802.11
  No
Radio standard GPRS
  No
Radio standard GSM
  No
Radio standard UMTS
  No
IO link master
  No
System accessory
  Yes
Degree of protection (IP)
  IP20
Type of electric connection
  Spring clamp connection
Time delay at signal exchange
 ms10 - 84
Fieldbus connection over separate bus coupler possible
  Yes
Rail mounting possible
  No
Wall mounting/direct mounting
  No
Front build in possible
  No
Rack-assembly possible
  No
Suitable for safety functions
  No
Category according to EN 954-1
  1
SIL according to IEC 61508
  None
Performance level acc. to EN ISO 13849-1
  None
Appendant operation agent (Ex ia)
  No
Appendant operation agent (Ex ib)
  No
Explosion safety category for gas
  None
Explosion safety category for dust
  None
Width
 mm45
Height
 mm38
Depth
 mm81
Approvals
UL File No.  E29184
UL Category Control No.  NKCR
CSA File No.  2324643
CSA Class No.  3211-07
North America Certification  UL listed, CSA certified
Specially designed for North America  No
Dimensions
IL03402036Z SmartWire-DT, Funktionselement für DILM/MSC
 
>
>
>
>
>
>
>>

Datasheet - PDF

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review
Have you got any questions?

If you have any questions, you can visit the following links or contact us via email

Please wait





* Required fields

or