M22-SOL-PVLPL11-230Q 152627 EATON MOELLER Fireman's switch, PV, 1N/O+1N/C, FW switch, red, IP65_x View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

M22-SOL-PVLPL11-230Q 152627 EATON MOELLER Fireman's switch, PV, 1N/O+1N/C, FW switch, red, IP65_x

M22-SOL-PVLPL11-230Q

152627

EATON - MOELLER

Available

Ship on today

Fireman's switch, PV, 1N/O+1N/C, FW switch, red, IP65_x

More details


Signaling Signalization Rotating Beacons

RMQ-Titan pilot devices - EATON - MOELLER

Emergency switching-off actuators - EATON - MOELLER

* Brand new produt in its original packing covered by the warranties and certifications provided by EATON - MOELLER

QuantityPrice
1+$40.86
4+$38.28
8+$37.34
12+$36.87
16+$36.60
*This price is per unit and is the net value (not including taxes if applicable).

How it Works

How does this work?

1 Add the products of your choice to the shopping cart
2 Enter your contact details and submit your request
3 You will be notified by email with a quotation
4 From the quotation simply finish your order and you will receive the products

There are several options for payment
- Credit card
- Wire Transfer
- PayPal


Related products

More info



Delivery programme
Product range
  Accessories
Products
  PV off switch
Connection
  for switching off the SOL30-SAFETY fireman's switch
Description
  Complete device
sealable
with mechanical switch position indication
Release by pulling
Contacts
   
N/O = Normally open
  1 N/O
N/C = Normally closed
  1 NC
Degree of Protection
  IP67
IP69K
Contact sequence
  >
Design verification as per IEC/EN 61439(Show features)(Hide features)
Technical data for design verification
   
Rated operational current for specified heat dissipation
InA6
Heat dissipation per pole, current-dependent
PvidW0.11
Equipment heat dissipation, current-dependent
PvidW0
Static heat dissipation, non-current-dependent
PvsW0
Heat dissipation capacity
PdissW0
Operating ambient temperature min.
 °C-25
Operating ambient temperature max.
 °C70
IEC/EN 61439 design verification
   
10.2 Strength of materials and parts
   
10.2.2 Corrosion resistance
  Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures
  Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat
  Meets the product standard's requirements.
10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
  Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation
  Please enquire
10.2.5 Lifting
  Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact
  Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions
  Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES
  Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances
  Meets the product standard's requirements.
10.5 Protection against electric shock
  Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
  Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
  Is the panel builder's responsibility.
10.8 Connections for external conductors
  Is the panel builder's responsibility.
10.9 Insulation properties
   
10.9.2 Power-frequency electric strength
  Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage
  Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material
  Is the panel builder's responsibility.
10.10 Temperature rise
  The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
  Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility
  Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function
  The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Technical data ETIM 6.0(Show features)(Hide features)
Low-voltage industrial components (EG000017) / Push button, complete (EC001028)
Electric engineering, automation, process control engineering / Low-voltage switch technology / Command and alarm device / Push-button actuator, complete unit ([email protected] [AKF046011])
Number of command positions
  1
Colour button
  Red
Construction type lens
  Round
Hole diameter
 mm22
Width opening
 mm0
Height meter opening
 mm0
Degree of protection (IP)
  IP67
Type of button
  High
Suitable for illumination
  No
Switching function latching
  Yes
Spring-return
  No
Supply voltage lamp
 V0
Number of contacts as normally open contact
  1
Number of contacts as normally closed contact
  1
Number of contacts as change-over contact
  0
Type of electric connection
  Screw connection
With front ring
  No
Material front ring
  Plastic
Colour front ring
  -
Dimensions
>
CAD data
>Product-specific CAD data
>3D Preview

Datasheet - PDF

Title:Language:Size:Type:
Datasheet 1: 152627 - M22-SOL-PVLPL11-230QEnglish148 KbytesDatasheet 1: 152627 - M22-SOL-PVLPL11-230Q
Datasheet 2: 152627 - M22-SOL-PVLPL11-230QEnglish91 KbytesDatasheet 1: 152627 - M22-SOL-PVLPL11-230Q
Complete catalogue 1: 152627 - M22-SOL-PVLPL11-230QEnglish7 MbytesDatasheet 1: 152627 - M22-SOL-PVLPL11-230Q

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review
Have you got any questions?

If you have any questions, you can visit the following links or contact us via email

Please wait





* Required fields

or