Product successfully added to your shopping cart
EWK-10081
174662
EATON-MOELLER
1
EWK-10081 EWK wall-mount enclosure with standard mounting units, 240 SU, IP43, IK09, protection class 2, RAL9016, HxWxB=800x1050x160mm
Compact Distribution Boxes
* Brand new product in its original packaging covered by the warranties and certifications provided by EATON-MOELLER
Thank you for your interest in our products; we hope the delivery time indicated is to your convenience.
While the order is being processed you can select the type of shipment that best suits your needs: 24-hour air express, standard 48-72 hour land, etc.
Basic function | Basic device | ||
Product function | Installation distribution boards | ||
Product range | EWK DBO | ||
Design | Surface mounted | ||
Installation site | Indoor | ||
Type of installation | Surface mounting | ||
Door/Flap | White | ||
Degree of Protection | IP43 | ||
Colour | White | ||
Module rack | Rail-frame | ||
Shroud for protection against accidental contact | Plastic | ||
Rows | Count | 5 | |
Module units per row | 48 | ||
Description | IP43 Protection Class II Steel sheet enclosure white (RAL 9016) | ||
Cable entries | Cable entries on top and bottom, back plate | ||
PE and N terminals design | Plug-in terminals | ||
PE and N terminals | Number x cross-sectional area | mm2 | PE: 4 x 6 x (1.5 - 16) N: 4 x 21 x (0.75 - 4) |
Equipment supplied | Enclosure Installation panel for modular installation devices Neutral-/protective conductor terminal Locking screws can be sealed Two-component membrane gland plate insert |
General | |||
Standards | EN 61439-3 | ||
RoHS (in accordance with Directive 2002/95/EC of the European Parliament and Council) | conform | ||
Ambient temperature | °C | -5 - +40 | |
Degree of Protection | IP43 | ||
Protection class | II (totally insulated) | ||
Rated operational voltage | Ue | V AC | 400 |
Rated frequency | f | Hz | 50 |
Material characteristics | |||
Material | Sheet steel, powder-coated Polystyren (plastic) | ||
Colour | white (RAL 9016) | ||
Material properties | |||
Mechanical | |||
Impact resistance | IK09 |
Technical data for design verification | |||
Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees, calculated as per IEC 60890 | |||
Individual enclosure for wall mounting | PV | CO | 78 |
Starting enclosure for wall mounting | PV | CO | 78 |
Middle enclosure for wall mounting | PV | CO | 78 |
Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees, calculated as per IEC 60890 | |||
Individual enclosure for wall mounting | PV | CO | 156 |
Starting enclosure for wall mounting | PV | CO | 155 |
Middle enclosure for wall mounting | PV | CO | 156 |
IEC/EN 61439 design verification | |||
10.2 Strength of materials and parts | |||
10.2.2 Corrosion resistance | Meets the product standard's requirements. | ||
10.2.3.1 Verification of thermal stability of enclosures | Meets the product standard's requirements. | ||
10.2.3.2 Verification of resistance of insulating materials to normal heat | Meets the product standard's requirements. | ||
10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects | 750 °C; meets the product standard's requirements. | ||
10.2.4 Resistance to ultra-violet (UV) radiation | Not relevant to indoor installations. | ||
10.2.5 Lifting | Does not apply to enclosures without lifting aids. | ||
10.2.6 Mechanical impact | IK09 | ||
10.2.7 Inscriptions | Meets the product standard's requirements. | ||
10.3 Degree of protection of ASSEMBLIES | IP43 | ||
10.4 Clearances and creepage distances | Is the panel builder's responsibility. | ||
10.5 Protection against electric shock | Protection class 2, therefore not applicable. | ||
10.6 Incorporation of switching devices and components | Is the panel builder's responsibility. | ||
10.7 Internal electrical circuits and connections | Is the panel builder's responsibility. | ||
10.8 Connections for external conductors | Is the panel builder's responsibility. | ||
10.9 Insulation properties | |||
10.9.2 Power-frequency electric strength | Ui= 400 V AC | ||
10.9.3 Impulse withstand voltage | 3 kV | ||
10.9.4 Testing of enclosures made of insulating material | Does not apply to metal enclosures. | ||
10.10 Temperature rise | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. | ||
10.11 Short-circuit rating | Is the panel builder's responsibility. | ||
10.12 Electromagnetic compatibility | Is the panel builder's responsibility. | ||
10.13 Mechanical function | Meets the product standard's requirements. |
Cabinet enclosures (EG000011) / Enclosure/switchgear cabinet (empty) (EC000261) | |||
Electric engineering, automation, process control engineering / Electrical cabinet, housing, rack / Electrical cabinet (empty) / Electrical cabinet ([email protected] [AGZ056013]) | |||
Width | mm | 1050 | |
Height | mm | 800 | |
Depth | mm | 160 | |
Material | Steel | ||
Type of surface | With powder coating | ||
Colour | White | ||
RAL-number | 9016 | ||
With mounting plate | No | ||
Mounting plate depth-adjustable | No | ||
Number of locks | 1 | ||
Floor installation possible | No | ||
Wall fastening possible | Yes | ||
Wall build in | Yes | ||
Pole fastening | No | ||
Tackable | Yes | ||
Number of doors | 2 | ||
Suitable for metrical mounting | Yes | ||
Suitable for outdoor set-up | No | ||
Pitched roof | No | ||
EMC-version | Yes | ||
Impact strength | IK09 | ||
Degree of protection (IP) | IP43 | ||
With glazed door | No | ||
With ventilation door | No | ||
With backside door | No |
Title: | Size: | Type: |
---|---|---|
EWK-10081 174662 174662.pdf | 137 Kbytes |
No customer reviews for the moment.
Rating: | |
Name: | |
Email: | |
Subject: | |
Text: | |
Do you recommend this product to buy? | |
Add review |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.