Standards
EN 61000-6-2
EN 61000-6-4
EN 61131-2
Potential isolation
Yes, through optocoupler
Ambient temperatureAmbient temperature, operation
0 - +55 °C
Ambient temperatureStorage, transport [ϑ]
-25 - +85 °C
Relative humidityRelative humidity
5 - 95 % (indoor), Level RH-2, no condensation (for storage at 45°C)
Ambient conditions, mechanicalDegree of Protection
IP20
Ambient conditions, mechanicalHarmful gases
SO2: 10 (rel. humidity < 75%, no condensation)
H2S: 1.0 (rel. humidity < 75 %,no condensation) ppm
Vibration resistance, operating conditions
according to IEC/EN 60068-2-6
Mechanical shock resistance
according to IEC 60068-2-27 g
Continuous shock resistance (IEC/EN 60068-2-29)
According to IEC 60068-2-29
Drop and topple
According to IEC 60068-2-31, free fall according to IEC 60068-2-32
Electromagnetic compatibility (EMC)ESD [Air/contact discharge]
EN 61000-4-2 kV
Electromagnetic compatibility (EMC)Electromagnetic fields [(0.08…1) / (1,4…2) / (2…2,7) GHz ]
EN 61100-4-2 V/m
Electromagnetic compatibility (EMC)Burst
EN 61100-4-4
Electromagnetic compatibility (EMC)Surge
EN 61100-4-5
Electromagnetic compatibility (EMC)Radiated RFI
EN 61100-4-6 V
Electromagnetic compatibility (EMC)Emitted interference (radiated, high frequency) [(30...230 MHz) / (230...1000 MHz)]
EN 55016-2-3 dB
Electromagnetic compatibility (EMC)Voltage fluctuations/voltage dips
EN 61131-2
Electromagnetic compatibility (EMC)Type test
to EN 61131-2
Other technical data (sheet catalogue)
Rated voltage through supply terminal [UL]
24 V DC
Rated current consumption from supply terminal [IL]
30 mA
Rated current consumption from module bus [IMB]
≦ 30 mA
Base moduleswithout C connection
2-/3-wire
XN-B6x-SBBSBB
Rated voltage through supply terminal [UL]
24 V DC
Rated current consumption from supply terminal [IL]
30 mA
Rated current consumption from module bus [IMB]
≦ 30 mA
Base moduleswithout C connection
2-/3-wire
XN-B6x-SBBSBB
Rated voltage through supply terminal [UL]
24 V DC
Rated current consumption from the supply terminal (at load current = 0 mA) [IL]
30 mA
Rated current consumption from module bus [IMB]
≦ 30 mA
Rated voltage through supply terminal [UL]
24 V DC
Rated current consumption from supply terminal [IL]
30 mA
Rated current consumption from module bus [IMB]
≦ 30 mA
Rated insulation voltage [Ui]
500 V AC
Input voltageNominal input voltage [Ue]
24 V DC V DC
Input voltageLow level [UeL]
-30/+5 V V
Input voltageHigh level [UeH]
15 - 30 V V
Input currentLow level⁄active level [IeL]
0 mA - 1.5 mA mA
Input currentHigh level⁄active level [IeH]
2 - 10 mA mA
Input delaytRising edge
< 200 µs
Input delaytFalling edge
< 200 µs
Base moduleswithout C connection
2-/3-wire
XN-B6x-SBBSBB
Rated voltage through supply terminal [UL]
24 V DC
Rated current consumption from supply terminal [IL]
30 mA
Rated current consumption from module bus [IMB]
≦ 30 mA
Base moduleswithout C connection
2-/3-wire
XN-B6x-SBBSBB
Rated voltage through supply terminal [UL]
24 V DC
Rated current consumption from supply terminal [IL]
30 mA
Rated current consumption from module bus [IMB]
≦ 30 mA
Rated voltage through supply terminal [UL]
24 V DC
Rated current consumption from supply terminal [IL]
30 mA
Rated current consumption from module bus [IMB]
≦ 30 mA
Input voltageNominal input voltage [Ue]
24 V DC V DC
Input voltageLow level [UeL]
-30/+5 V V
Input voltageHigh level [UeH]
15 - 30 V V
Input currentLow level [IeL]
0 mA - 1.5 mA mA
Input currentHigh level [IeH]
2 - 10 mA mA
Rated voltage through supply terminal [UL]
24 V DC
Rated current consumption from supply terminal [IL]
30 mA
Rated current consumption from module bus [IMB]
≦ 30 mA
The supply terminal (UL) supplies power for the card's electronics and for the sensors at the inputs. The total current required for each card is the sum of all partial currents.
Part of the XI/ON card’s electronics is supplied with module bus voltage (5 V DC), the other part through the supply terminal (UL).
Max. permissible capacity: 141 nF at 79 V AC/50 Hz; 23 nF at 265 V AC/50 Hz