Product name
Eaton XIOC I/O module
Product Length/Depth
100 millimetre
Product height
95 millimetre
Product width
30 millimetre
Product weight
0.145 kilogram
Certifications
CSA-C22.2 No. 142-M
UL File No.: E135462
CSA File No.: 012528
EN 50178
CSA-C22.2 No. 0-M
IEC/EN 61131-2
CE
UL
UL508
UL Category Control No.: NRAQ
CSA
CSA Class No.: 2252-01
Electric connection type
Screw-/spring clamp connection
Features
Digital inputs configurable
Digital outputs configurable
Functions
Overvoltage protection
Admissible range
20.4 – 28.8 V (11.8 – 14.4 V), Power supply
Current consumption
2 A per group, Total max. current, Outputs
80 mA, Internal current consumption (5 V DC), Outputs
Number of channels
16 Channels with the same reference potential (Inputs, Outputs)
Protection
Protection class: 1
Switching capacity
IEC/EN 60947-5-1, utilization category DC-13, Digital outputs
Switching level
≤ 15 V DC, ON, Voltage level to IEC 61131-2, limit value type 1, Inputs
≤ 5 V DC, OFF, Voltage level to IEC 61131-2, limit value type 1, Inputs
Type
Digital module
Plug-in terminal block
Used with
XC100/200 (expandable with up to 15 XI/OC modules)
Ambient conditions, mechanical
Impact resistance
500 g/⌀ 50 mm ±25 g
Shock resistance
15 g, Mechanical, Shock duration 11 ms
Vibration resistance
10 - 57 Hz, ± 0.075 mm
57 - 150 Hz ± 1.0 mm
Climatic environmental conditions
Ambient operating temperature - min
0 °C
Ambient operating temperature - max
55 °C
Ambient storage temperature - min
-25 °C
Ambient storage temperature - max
70 °C
Electro magnetic compatibility
Emitted interference
Class A (according to DIN/EN 55011/22)
Terminals
Optionally, screw terminals or spring-loaded terminals for digital/analog modules
Rated operational voltage
24 (12) V DC
Short-circuit protection
Yes, Outputs
Yes, Short-circuit rating, Outputs
Short-circuit tripping current
Max. 1.2 A over 3 ms per output, Outputs
Supply voltage at AC, 50 Hz - min
0 V AC
Supply voltage at AC, 50 Hz - max
0 V AC
Supply voltage at DC - min
20.4 V DC
Supply voltage at DC - max
28.8 V DC
Connection
16 connections, 4 inputs, 12 freely parameterizable as inputs/outputs, 24 V DC outputs 0.5 A
Connection type
Plug-in terminal block, Power supply
LED indicator
Status indication of Power supply: LED
Delay time
0.1 ms typ., Digital inputs 24 V DC, Delay time from 1 to 0, Debounce ON
0.1 ms typ., Digital inputs 24 V DC, Delay time from 0 to 1, Debounce ON
100 µs typ., Digital outputs, High -> Low, Off-delay
Input current at signal 1
4 mA
Input voltage
24 V DC (modules)
Lamp load
Max. 3 W (without Rv per channel)
Number of inputs (digital)
16
Number of outputs (analog)
3
Number of outputs (digital)
12
Output
Transistor (source type)
Output voltage
12/24 V DC (-15 %/+20 %)
Parallel switching
In groups 0 - 3, 4 - 7, 8 - 11
Actuation of the outputs within a group only in the same program cycle
Explosion safety category for dust
None
Explosion safety category for gas
None
Potential isolation
Power supply against I/O bus: yes
Protection against polarity reversal
Yes
Equipment heat dissipation, current-dependent Pvid
0 W
Heat dissipation capacity Pdiss
0 W
Heat dissipation per pole, current-dependent Pvid
0 W
Rated operational current for specified heat dissipation (In)
0 A
Static heat dissipation, non-current-dependent Pvs
1.8 W
10.2.2 Corrosion resistance
Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard's requirements.
10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects
Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation
Meets the product standard's requirements.
10.2.5 Lifting
Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact
Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions
Meets the product standard's requirements.
10.3 Degree of protection of assemblies
Meets the product standard's requirements.
10.4 Clearances and creepage distances
Meets the product standard's requirements.
10.5 Protection against electric shock
Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
Is the panel builder's responsibility.
10.8 Connections for external conductors
Is the panel builder's responsibility.
10.9.2 Power-frequency electric strength
Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage
Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material
Is the panel builder's responsibility.
10.10 Temperature rise
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
Is the panel builder's responsibility.
10.12 Electromagnetic compatibility
Is the panel builder's responsibility.
10.13 Mechanical function
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.