Standards
EN 61000-6-2
EN 61000-6-4
EN 61131-2
Potential isolation
Yes, through optocoupler
Ambient temperatureAmbient temperature, operation
0 - +55 °C
Ambient temperatureStorage, transport [ϑ]
-25 - +85 °C
Relative humidityRelative humidity
5 - 95 % (indoor), Level RH-2, no condensation (for storage at 45°C)
Ambient conditions, mechanicalDegree of Protection
IP20
Ambient conditions, mechanicalHarmful gases
SO2: 10 (rel. humidity < 75%, no condensation)
H2S: 1.0 (rel. humidity < 75 %,no condensation) ppm
Vibration resistance, operating conditions
according to IEC/EN 60068-2-6
Mechanical shock resistance
according to IEC 60068-2-27 g
Continuous shock resistance (IEC/EN 60068-2-29)
According to IEC 60068-2-29
Drop and topple
According to IEC 60068-2-31, free fall according to IEC 60068-2-32
Electromagnetic compatibility (EMC)ESD [Air/contact discharge]
EN 61000-4-2 kV
Electromagnetic compatibility (EMC)Electromagnetic fields [(0.08…1) / (1,4…2) / (2…2,7) GHz ]
EN 61100-4-2 V/m
Electromagnetic compatibility (EMC)Burst
EN 61100-4-4
Electromagnetic compatibility (EMC)Surge
EN 61100-4-5
Electromagnetic compatibility (EMC)Radiated RFI
EN 61100-4-6 V
Electromagnetic compatibility (EMC)Emitted interference (radiated, high frequency) [(30...230 MHz) / (230...1000 MHz)]
EN 55016-2-3 dB
Electromagnetic compatibility (EMC)Voltage fluctuations/voltage dips
EN 61131-2
Electromagnetic compatibility (EMC)Type test
to EN 61131-2
Other technical data (sheet catalogue)
Measured variables
Voltage
Rated voltage through supply terminal [UL]
24 V DC
Rated current consumption from supply terminal [IL]
50 mA
Rated current consumption from module bus [IMB]
≦ 43 mA
Heat dissipation
normally 1 W
Basic error limit at 23 °C
0.2 %
Repetition accuracy (deviation)
0.05 %
Temperature coefficient
300 ppm/°C of full scale
Measured value representation
16-bit signed integer
12-bit signed integer left-justified
12-bit full range left-justified
Measured variables
Voltage
Rated voltage through supply terminal [UL]
24 V DC
Rated current consumption from supply terminal [IL]
50 mA
Rated current consumption from module bus [IMB]
≦ 43 mA
Heat dissipation
normally 1 W
Output voltage
-10/0…+10 V DC
Load resistanceResistive load
> 1000 Ω
Load resistanceCapacitive load
>1 µF
Short-circuit current
40 mA
Basic error limit at 23 °C
0.2 %
Repetition accuracy (deviation)
0.05 %
Temperature coefficient
300 ppm/°C of full scale
Settling timeResistive load
0.1 ms
Settling timeInductive load
0.5 ms
Settling timeCapacitive load
0.5 ms
Interference voltage suppression
Common-mode > 90 dB
Differential-mode > 70 dB
Crosstalk between the channels > -50 dB
Measured value representation
16-bit signed integer
12-bit signed integer left-justified
12-bit full range left-justified
Rated voltage through supply terminal [UL]
24 V DC
Rated current consumption from the supply terminal (at load current = 0 mA) [IL]
50 mA
Rated current consumption from module bus [IMB]
≦ 43 mA
Power loss [P]
Normally 1 W
Rated voltage through supply terminal [UL]
24 V DC
Rated current consumption from supply terminal [IL]
50 mA
Rated current consumption from module bus [IMB]
≦ 43 mA
Heat dissipation
normally 1 W
Rated voltage through supply terminal [UL]
24 V DC
Rated current consumption from supply terminal [IL]
50 mA
Rated current consumption from module bus [IMB]
≦ 43 mA
Power loss [P]
Normally 1 W
Rated voltage through supply terminal [UL]
24 V DC
Rated current consumption from supply terminal [IL]
50 mA
Rated current consumption from module bus [IMB]
≦ 43 mA
Rated voltage through supply terminal [UL]
24 V DC
Rated current consumption from supply terminal [IL]
50 mA
Rated current consumption from module bus [IMB]
≦ 43 mA
Heat dissipation
normally 1 W
Temperature coefficient
300 ppm/°C of full scale
Number of parameter bits
6 (3 per channel)
Rated voltage through supply terminal [UL]
24 V DC
Rated current consumption from supply terminal [IL]
50 mA
Rated current consumption from module bus [IMB]
≦ 43 mA
Power loss [P]
Normally 1 W
Number of parameter bytes
6 (3 per channel)