Product successfully added to your shopping cart
HT-FL75
2665030
CEMBRE
1
Punching tool
TOOLS > Hydraulic tools
* Brand new product in its original packaging covered by the warranties and certifications provided by CEMBRE
Thank you for your interest in our products; we hope the delivery time indicated is to your convenience.
While the order is being processed you can select the type of shipment that best suits your needs: 24-hour air express, standard 48-72 hour land, etc.
Max punching diameter 120 mm
Hand operated hydraulic tool specifically designed for hole punching stainless steel, soft steel, fibreglass and plastic sheet materials up to 3,5 mm thickness.
Compact and lightweight and easy to handle.
The balanced punching head pivots 180deg through a full 360deg rotation for ease of use in confined spaces.
The tool is supplied complete with plastic case VAL P28 for protection and storage when not in use.
Supplied with Pullers TD-11, TD-19 and spiral bit Ø 11,5 mm.
ROUND PUNCH | |||||||||
Hole Diameter | Material max thickness (mm) | Pilot hole Ø | Type | ||||||
Nominal | Pg | ISO | GAS | Stainless Steel | Mild Steel | KIT (Punch + Die) | Puller | ||
Ø (mm) | Ø (inch) | (mm) | |||||||
15,5 | .610 | Pg9 | - | - | 2,5 mm (0.1 in.) Rm= 700 N/mm2 | 3,5 mm (0.14 in.) Rm= 510 N/mm2 | 11,5 | RD15.5SS | TD-11 |
16,2 | .638 | - | ISO-16 | - | RD16.2SS | ||||
17 | .669 | - | - | G3/8” | RD17SS | ||||
17,5 | .689 | - | - | - | RD17.5SS | ||||
18,8 | .740 | Pg11 | - | - | RD18.8SS | ||||
19,1 | .752 | - | - | - | RD19.1SS | ||||
20,5 | .807 | Pg 13,5 | ISO-20 | - | RD20.5SS | ||||
21,5 | .846 | - | - | G1/2" | RD21.5SS | ||||
22,6 | .890 | Pg16 | - | - | RD22.6SS | ||||
23,8 | .937 | - | - | G5/8” | RD23.8SS | ||||
25,4 | 1.000 | - | ISO-25 | - | RD25.4SS | ||||
27 | 1.063 | - | - | G3/4” | RD27SS | ||||
28,5 | 1.122 | Pg21 | - | - | RD28.5SS | ||||
30,5 | 1.201 | - | - | G7/8” | RD30.5SS | ||||
28,5 | 1.122 | Pg 21 | - | - | 20 | RD28.5SS-19 | TD-19 | ||
30,5 | 1.201 | - | - | G7/8” | RD30.5SS-19 | ||||
31,8 | 1.252 | - | - | - | RD31.8SS | ||||
32,5 | 1.279 | - | ISO-32 | - | RD32.5SS | ||||
34 | 1.338 | - | - | G1" | RD34SS | ||||
34,6 | 1.362 | - | - | - | RD34.6SS | ||||
37,2 | 1.464 | Pg29 | - | - | RD37.2SS | ||||
38,1 | 1.500 | - | - | - | RD38.1SS | ||||
38,5 | 1.515 | - | - | G1"1/8" | RD38.5SS | ||||
40,5 | 1.594 | - | ISO-40 | - | RD40.5SS | ||||
41,3 | 1.626 | - | - | - | RD41.3SS | ||||
42,5 | 1.673 | - | - | G1”1/4” | RD42.5SS | ||||
43,2 | 1.701 | - | - | - | RD43.2SS | ||||
44,5 | 1.752 | - | - | - | RD44.5SS | ||||
47,2 | 1.858 | Pg36 | - | - | RD47.2SS | ||||
48,5 | 1.909 | - | - | G1”1/2” | RD48.5SS | ||||
50,5 | 1.988 | - | ISO-50 | - | RD50.5SS | ||||
51,4 | 2.023 | - | - | - | RD51.4SS | ||||
52,4 | 2.063 | - | - | - | RD52.4SS | ||||
54,2 | 2.134 | Pg42 | - | G1”3/4” | RD54.2SS | ||||
60 | 2.362 | Pg48 | - | G2” | RD60SS | ||||
60,5 | 2.381 | - | - | - | RD60.5SS | ||||
64 | 2.520 | - | ISO-63 | - | RD64SS | ||||
65 | 2.559 | - | - | - | RD65SS | ||||
76 | 2.992 | - | - | G2”1/2” | 3 | RD76SS | |||
76,5 | 3.011 | - | - | - | 3,5 | RD76.5SS | |||
80,5 | 3.169 | - | - | - | 3 | RD80.5SS | |||
89 | 3.503 | - | - | G3" | 3,5 | RD89SS | |||
90 | 3.543 | - | - | - | 2 | 3 | RD90SS | ||
100 | 3.937 | - | - | - | 2 | 3 | 29 | RD100SS | TD-28.5* |
102 | 4.015 | - | - | - | 2 | 3 | RD102SS | ||
114 | 4.488 | - | - | - | 2 | 2,5 | RD114SS | ||
120 | 4.724 | - | - | - | 1,5 | 2 | RD120SS | ||
140 | 5.512 | - | - | - | 1,5 | 2 | RD140SS |
SQUARE PUNCH | |||||
Hole Diameter | Material max thickness (mm) | Pilot hole Ø | Type | ||
Nominal | Stainless Steel | Mild Steel | KIT (Punch + Die + Puller) | ||
Ø (mm) | Ø (inch) | (mm) | |||
21,0 x 21,0 | .827 x .827 | 2,5 | 3,5 | 12 | RD21X21 |
46,0 x 46,0 | 1.811 x 1.811 | 1,5 | 2 | 26,5 | RD46X46 |
68,0 x 68,0 | 2.677 x 2.677 | 22,5 | RD68X68 | ||
92,0 x 92,0 | 3.622 x 3.622 | RD92X92 | |||
126,0 x 126,0 | 4.960 x 4.960 | 28,5 | RD126X126 | ||
138,0 x 138,0 | 5.433 x 5.433 | 1 | 1,5 | RD138X138 | |
220,0 x 220,0 | 8.661 x 8.661 | RD220X220 |
RECTANGULAR PUNCH | |||||
Hole Diameter | Material max thickness (mm) | Pilot hole Ø | Type | ||
Nominal | Stainless Steel | Mild Steel | KIT (Punch + Die + Puller) | ||
Ø (mm) | Ø (inch) | (mm) | |||
18,0 x 46,0 | .709 x 1.811 | 2 | 2 | 16,5 | RD18X46 |
22,0 x 30,0 | .866 x 1.181 | RD22X30 | |||
22,0 x 46,0 | .866 x 1.811 | RD22X46 | |||
35,0 x 86,0 | 1.377 x 3.385 | RD35X86 | |||
35,0 x 112,0 | 1.377 x 4.409 | RD35X112 | |||
36,0 x 46,0 | 1.417 x 1.811 | 23,8 | RD36X46 | ||
37,0 x 54,0 | 1.456 x 2.125 | 1,5 | 16,5 | RD37X54 | |
37,0 x 67,0 | 1.456 x 2.637 | RD37X67 | |||
37,0 x 88,0 | 1.456 x 3.464 | 26,5 | RD37X88 | ||
37,0 x 104,0 | 1.456 x 4.094 | RD37X104 | |||
37,0 x 115,0 | 1.456 x 4.527 | RD37X115 | |||
46,0 x 54,0 | 1.811 x 2.126 | RD46X54 | |||
46,0 x 72,0 | 1.811 x 2.835 | RD46X72 | |||
46,0 x 107,0 | 1.811 x 4.212 | RD46X107 | |||
50,0 x 98,0 | 1.968 x 3.858 | RD50X98 | |||
67,0 x 126,0 | 2.637 x 4.960 | 28,5 | RD67X126 |
"D" PUNCH | |||||
Hole Diameter | Material max thickness (mm) | Pilot hole Ø | Type | ||
Nominal | Stainless Steel | Mild Steel | KIT (Punch + Die + Puller) | ||
Ø (mm) | Ø (inch) | (mm) | |||
(a)38,3 x (b)36,6 | (a)1.507 x (b)1.442 | 2,5 | 3,5 | 18,5 | RD18D |
(a)43,1 x (b)41,5 | (a)1.696 x (b)1.632 | RD24D |
USE OF NON-CEMBRE PUNCHING ACCESSORIES | ||
Type | Punch & Die | Pilot Hole Ø mm |
TRD-9,4C (*) | KLAUKE, GREENLEE 3/8" - 24 UNF | Ø 9.7 |
TRD-M11C (*) | IMB, BM, COSMEC (M11x1.5) | Ø 11.5 |
TD-M16C | IMB, BM, COSMEC (M16x1.5) | Ø 16.5 o RD17.5SS |
TD27 | COSMEC (Ø105÷Ø140) | Ø 27.5 |
TD14X14-M14 | COSMEC 46x46 | Ø 18.8 |
TD120X20-M20 | COSMEC 92x92 | Ø 27.5 |
TD20X20-M20 | BM, COSMEC 42x95 | Ø 27.5 |
TGD-13.5X13.5-M13 | COSMEC 40x40; 45x45; 46x46 | Ø 18.8 |
TGD-10X10-M9 | COSMEC 006505 | Ø 13.8 |
Properties | |
---|---|
Maximum diameter pierceable | 140 mm |
Length | 452 mm |
Width | 129 mm |
Weight | 3.67 kg |
Title: | Size: | Type: |
---|---|---|
HT-FL75 PUNCHING TOOL - CEMBRE - HT-FL75 - 2665030 | 270 Kbytes | |
HT-FL75 PUNCHING TOOL - CEMBRE - HT-FL75 - 2665030 | 30 Mbytes | |
HT-FL75 PUNCHING TOOL - CEMBRE - HT-FL75 - 2665030 | 445 Kbytes | |
HT-FL75 PUNCHING TOOL - CEMBRE - HT-FL75 - 2665030 | 28 Mbytes | |
Download general catalog |
No customer reviews for the moment.
Rating: | |
Name: | |
Email: | |
Subject: | |
Text: | |
Do you recommend this product to buy? | |
Add review |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.