CLP2EB1B115 CARLO GAVAZZI Selected parameters SYSTEM System SENSING FUNCTION Filling or Emptying CONNECTION .. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

CLP2EB1B115 CARLO GAVAZZI Selected parameters SYSTEM System SENSING FUNCTION Filling or Emptying CONNECTION ..

CLP2EB1B115

CLP2EB1B115

CARLO GAVAZZI

Available

Ship on today

Selected parameters SYSTEM System SENSING FUNCTION Filling or Emptying CONNECTION Terminals OUTPUT Relay SPDT MATERIAL NORYL Others HOUSING 35,5 x 81 x 60 mm SENSING FUNCTION 5 koHm to 150 koHm MATERIAL NORYL

More details


Level Sensors Detectors Measurement

Sensors

Conductive Level Sensors

* Brand new produt in its original packing covered by the warranties and certifications provided by CARLO GAVAZZI

QuantityPrice
1+$48.50
5+$44.96
9+$44.04
13+$43.54
18+$43.20
*This price is per unit and is the net value (not including taxes if applicable).

How it Works

How does this work?

1 Add the products of your choice to the shopping cart
2 Enter your contact details and submit your request
3 You will be notified by email with a quotation
4 From the quotation simply finish your order and you will receive the products

There are several options for payment
- Credit card
- Wire Transfer
- PayPal


Related products

More info



Conductive Sensors
2-point level controller
Type CL with potentiometer
• Conductive level controller
• Sensitivity adjustment from 5 kΩ to 150 kΩ
• For filling or emptying applications
• Low-voltage AC electrodes
• Easy installation with 11 pin circular plug
• Rated operational voltage:
24 VDC, 24 VAC, 115 VAC or 230 VAC
• Output 1 x 8A/250 VAC SPDT relay
• LED indication for: Output ON and Power ON
Product Description
Ordering Key
CLP2EB1B230
µ-Processor based level controller for liquids with a wide sensitivity range (like sewage water, chemicals, salt water etc.).
Max./min. control of charging/ discharging. The sensitivity is adjustable by means of the potentiometer.
1 x 8A SPDT relay output.
Conductive level Plug mounting No of inputs
Charge/discharge
Basic with potentiometer
1 relay output Relay SPDT Power supply
Type Selection
Mounting Relay Ordering no. Ordering no. Ordering no. Ordering no.
Supply: 24 VDC Supply: 24 VAC Supply: 115 VAC Supply: 230 VAC
11-p circular plug SPDT CLP2EB1B724 CLP2EB1B024 CLP2EB1B115 CLP2EB1B230
Specifications
Rated operational voltage (UB)
Pin 2 & 10 230 195 to 265 VAC, 45 to 65 Hz
115 98 to 132 VAC, 45 to 65 Hz
024 20.4 to 27.6 VAC, 45 to 65 Hz
Supply class 2 724 20.4 to 27.6 VDC Rated insulation voltage <2.0 kVAC (rms) Rated impulse withstand
voltage 4 kV (1.2/50 µs) (line/neutral)
Rated operational power
AC supply 5 VA DC supply 1 W
Delay on operate (tV) < 2 s
Outputs
Rated insulation voltage 250 VAC (rms) (cont./elec.)
Relay Rating (AgCdO) µ (micro gap)
Resistive loads AC1 8 A / 250 VAC (2500 VA) DC1 1 A / 250 VDC (250 W)
or 10 A / 25 VDC (250 W) Small induc. Loads AC15 0,4 A / 250 VAC
DC13 0,4 A / 30 VDC Mechanical life (typical) ≥ 30 x 106 operations
@ 18’000 imp/h
Electrical life (typical) AC1 > 250’000 operations
Level probe supply Max. 5 VAC
Level probe current Max. 2 mA
Sensitivity 5 kΩ to 150 kΩ, CF* = 2.2 nF
Dielectric voltage >2.0 KVAC (rms) (contacts / electronics)
Rated impulse withstand volt. 4 kV (1.2/50 µS) (contacts /
electronics) (IEC 664)
Operating frequency (f)
Relay output 1 Hz
Response time
OFF-ON (ton) 1 s
ON-OFF (toff) 1 s
Environment
Overvoltage category III (IEC 60664)
Degree of protection IP 20 (IEC 60529, 60947-1) Pollution degree 2 (IEC 60664/60664A,
60947-1)
Temperature
Operating -20º to +50ºC (-4º to + 122ºF) Storage -40º to +85ºC (-40º to +185ºF)
Housing material NORYL PPO, light grey
Weight
AC supply 180 g
DC supply 70 g
Approvals cURus UL508, CSA C22.2
CSA CSA C22.2
CE marking Yes
*CF = maximum Cable Capacitance
Specifications are subject to change without notice (26.08.2014) 1

Datasheet - PDF

Title:Language:Size:Type:
pdf1-mostradoSelected parameters SYSTEM System SENSING FUNCTION Filling or Emptying CONNECTION Te - CARLO GAVAEnglish232 Kbytespdf1-mostradoSelected parameters SYSTEM System SENSING FUNCTION Filling or Emptying CONNECTION Te - CARLO GAVA
pdf1-Selected parameters SYSTEM System SENSING FUNCTION Filling or Emptying CONNECTION Te - CARLO GAEnglish12 Mbytespdf1-mostradoSelected parameters SYSTEM System SENSING FUNCTION Filling or Emptying CONNECTION Te - CARLO GAVA
pdf2-mostradoSelected parameters SYSTEM System SENSING FUNCTION Filling or Emptying CONNECTION Te - CARLO GAVAEnglish200 Kbytespdf1-mostradoSelected parameters SYSTEM System SENSING FUNCTION Filling or Emptying CONNECTION Te - CARLO GAVA

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review
Have you got any questions?

If you have any questions, you can visit the following links or contact us via email

Please wait





* Required fields

or