UA30CLD35FKM7 CARLO GAVAZZI Selected parameters SYSTEM Sensor HOUSING M30 SENSING RANGE 3 m CONNECTION M16 p..

Ultrasonic
Diffuse, Programmable Outputs
Types UA 30 CLD .. F. M7
Product Description
• Cylindrical M30 polyester housing
• Sensing distance: 150-1500 mm, 250-2000 mm or 350-3500 mm
• Programmable outputs: Analogue (0-10 V or 4-20 mA, inverted or non-inverted) and 2 PNP open collector, NO/NC switching outputs, 100 mA
• Programmable hysteresis, switching frequency and set points
• RS 232 interface
• Power supply: 19 to 30 VDC
• 8° beam angle
• Protection: Short-circuit, reverse polarity, transients
• Protection degree IP 67
• M16 plug
Ordering Key UA 30 CLD 15 FK M7
A family of diffuse ultrasonic sensors with sensing range from 150-1500 mm, 250-2000 mm and 350-3500 mm with programmable settings by Windows based software. The programmability of the sensors gives the possibility of an universal application in any area of industrial environ- ment. The outputs are 0-10V
or 4-20mA and RS232 inter- face, which make it possible to communicate with BUS- systems. Due to use of micro- processorcontrolthe digital filtering makes the sensor immune to most electromag- netic interferences. The con- trol input enables synchroni- sation in an easy way.
Ultrasonic sensor Housing style Housing size Housing material Housing length Detection principle Sensing distance Output type
Output configuration
Connection
Type Selection
HousingConnectionRated operating Ordering no.Ordering no. diameter dist. (Sn)Analogue 0-10 V Analogue 4-20 mA
M30 M16 150-1500 mm UA 30 CLD 15 FK M7UA 30 CLD 15 FG M7
M30 M16 250-2000 mm UA 30 CLD 20 FK M7UA 30 CLD 20 FG M7
M30 M16 350-3500 mm UA 30 CLD 35 FK M7UA 30 CLD 35 FG M7
Specifications
Rated operational volt. (Ue) 19 to 30 VDC (ripple incl.)
Ripple ≤ 10%
Output current (Ie) max. 100 mA (continuous)
No-load supply current (Io) ≤ 35 mA Off-state current (Ir)200 µA Voltage drop (Ud) 4.5 V Power-on delay < 10 ms Carrier frequency200 KHz
ProtectionShort-circuit, transients and reverse polarity
Rated insulation voltage> 1 kV
Control input Hold/Synchronisation
Output, analogue
UA30CLD..FKM7Analogue 0-10 or 10-0 VDC, programmable
Load: > 1 kΩ
UA30CLD..FGM7 Analogue 4-20 or 20-4 mA, programmable
Load: < 500 Ω
ScalingProgrammable
Linearity± 0.5%/3 mm
Repeatabilty ± 0.2%/0.4 mm
Load
4 - 20 mA max. 500 Ω
0 - 10 Vmin. 1 kΩ
Output, switching 2 x PNP, open collector, NO/NC, 100 mA, programmable.
Programming- sensor address
(Windows based software) - analogue output
offset, range, inversion
- 2 set points/Limits NO/NC, position, hysteresis
- digital output
Hex, BCD
- cycle time
- over/under range
- transmit time
- offset
- slope
Output, informationSerial HEX/BCD
Specifications are subject to change without notice (22.09.2009) 1