PD30CNP06PPDU CARLO GAVAZZI Selected parameters SYSTEM Retro-reflective, Polarized HOUSING rectangular SENSI.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

PD30CNP06PPDU CARLO GAVAZZI Selected parameters SYSTEM Retro-reflective, Polarized HOUSING rectangular SENSI..





Ship on today

Selected parameters SYSTEM Retro-reflective, Polarized HOUSING rectangular SENSING RANGE 6 ... 20 m CONNECTION Cable OUTPUT DC PNP MATERIAL Plastic Others SENSING RANGE 6 m HOUSING 30 x 20 x 10,8 mm MATERIAL ABS ADDITIONAL Dust output

More details

Photocells Photoelectric Sensors Detectors


Photoelectric Sensors

* Brand new produt in its original packing covered by the warranties and certifications provided by CARLO GAVAZZI

*This price is per unit and is the net value (not including taxes if applicable).

There are several options for payment
- Credit card
- Wire Transfer
- PayPal

Related products

More info

Retro-reflective, Polarized
Type PD30CNP06....DU
• Miniature sensor range
• Range: 6 m, with reflector
• Sensitivity adjustment by Teach-In programming
• Modulated, red light 660 nm, polarized
• Supply voltage: 10 to 30 VDC
• Output: 100 mA, NPN or PNP preset
• Make and break switching function programmable
• LED indication for output, stability and power ON
• Protection: reverse polarity, short circuit and transients
• Cable and plug versions
• Excellent EMC performance
• Dust alarm output
Product Description
Ordering Key
The PD30CNP06 sensor fam- ily comes in a compact 10 x
30 x 20 mm reinforced
PMMA/ABS housing.
Thesensorsareusefulin applications wherehigh- accuracy detection as well as small size is required. Compacthousingandhigh power LED for excellent per- formance-size ratio.
The Teach-In function for adjustmentof the sensitivity makes the sensors highly flexible. The output type is preset (NPN or PNP), and the output switching function is one programmable (NO or NC) and one dust output NO or NC.
Housing style Housing size Housing material Housing length Detection principle Sensing distance Output type
Output configuration
Connection type
Dust output
Type Selection
HousingRangeConnection Ordering no. Ordering no. W x H x DSn NPN PNP
Make or break switchingMake or break switching
10 x 30 x 20 mm 6 m Cable PD 30 CNP 06 NPDU PD 30 CNP 06 PPDU
10 x 30 x 20 mm 6 m Plug PD 30 CNP 06 NPM5DUPD 30 CNP 06 PPM5DU
Note: Reflectors to be ordered seperately
Rated operating distance (Sn)Up to 6 m, with reflector
Ø 80 mm (ER4)
4 m on ER4060 reflector
Blind zone 100 mm
Sensitivity Adjustable by Teach-In
Temperature drift ≤ 0.1%/ºC
Hysteresis (H)
(differential travel) ≤ 10%
Rated operational volt. (UB )10 to 30 VDC (ripple included)
Ripple (Urpp ) ≤ 10%
Output current
Continuous (Ie) ≤ 100 mA Short-time (I) ≤ 100 mA
(max. load capacity 100 nF)
Dust output current
Continuous (Ie) ≤ 20 mA Short-time (I) ≤ 20 mA
(max. load capacity 100 nF)
No load supply current (Io)≤ 30 mA @ 24 VDC
Minimum operational current (Im) 0.5 mA
OFF-state current (Ir )≤ 100 µA
Voltage drop (Ud ) ≤ 2.4 VDC @ 100 mA
Protection Short-circuit, reverse polarity and transients
Light source GaAlAs, LED, 660 nm Light typeRed, modulated Sensing angle ± 2º
Ambient light10,000 lux
Light spot110 mm @ 1.5 m
Operating frequency1000 Hz
Response time
OFF-ON (tON)≤ 0.5 ms
ON-OFF (tOFF ) ≤ 0.5 ms
Power ON delay (tv) ≤ 300 ms
Output function
NPN and PNPPreset
NO/NC switching function Set up by button
Output configuration
Programming options
Output pin 4 black NO or NC OutputNO or NC (dust)
Dust alarm output
Delay on operate 20 ms
Output ON LED, yellow
Signal stability ON and power ON LED, green
Specifications are subject to change without notice (09.12.2008) 1

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
  Add review