PC50CNR10BAM1 CARLO GAVAZZI Selected parameters SYSTEM Retro-reflective HOUSING rectangular SENSING RANGE 6 .. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

PC50CNR10BAM1 CARLO GAVAZZI Selected parameters SYSTEM Retro-reflective HOUSING rectangular SENSING RANGE 6 ..





Ship on today

Selected parameters SYSTEM Retro-reflective HOUSING rectangular SENSING RANGE 6 ... 20 m CONNECTION M12 Plug AC OUTPUT RELAY SPDT MATERIAL Plastic Others SENSING RANGE 10 m HOUSING 50 x 50 x 17 mm MATERIAL PC + ABS

More details

Photocells Photoelectric Sensors Detectors


Photoelectric Sensors

* Brand new produt in its original packing covered by the warranties and certifications provided by CARLO GAVAZZI

*This price is per unit and is the net value (not including taxes if applicable).

There are several options for payment
- Credit card
- Wire Transfer
- PayPal

Related products

More info

Retro-reflective, Transistor Output
Type PC50CNR10BA
• Range: 10 m
• Adjustable sensitivity
• Modulated, infrared light
• Supply voltage: 10 to 30 VDC
• Output: 200 mA, NPN or PNP selectable
• Make and break switching function
• LED for output indication, signal stability and power ON
• Protection: reverse polarity, short-circuit, transients
• Cable and plug versions
• High degree of EMC
Product Description
Ordering Key
The PC50CNR. is a family of general purpose retro-reflec- tive sensors in a compact square 17 x 50 x 50 mm rein- forced PC/ABS-housing. They are useful in applications where basic sensors provide adequatesensingperfor-
mance. The long sensing range together with sensitivity adjustment gives a very flexi- ble sensor. The DC types are witha transistoroutputand the configurationis fully pro- grammable (NPN, PNP, NO and NC).
Housing style Housing size Housing material Housing length Detection principle Sensing distance Output type
Output configuration
Connection type
Type Selection
HousingRangeOrdering no.Ordering no.
W x H x DSn NPN & PNP cable NPN & PNP plug
Make & break switchingMake & break switching
17 x 50 x 50 mm10 m PC 50 CNR 10 BA PC 50 CNR 10 BAM1
Note: Reflectors to be ordered separately
Rated operating distance (Sn)10 m,
with reflector type ER 4, ref. target
Blind zone Max. 10 cm
Sensitivity Adjustable by single-turn potentiometer
Temperature drift ≤ 0.5%/°C
Hysteresis (H)
Diffential travel 3-20%
Rated operational volt. (UB) 10 to 30 VDC (ripple included)
Ripple (Urpp ) ≤ 10%
Output current
Continuous (Ie) ≤ 200 mA Short-time (I)≤ 200 mA,
(max. load capacity 100 nF)
No load supply current (Io)≤ 40 mA Minimum operational current (Im) 0.5 mA OFF-state current (Ir ) ≤ 100 µA
Voltage drop (Ud)≤ 2.5 VDC @200 mA
Protection Short-circuit, reverse pola- rity, transients
Light source GaAlAs, LED, 880 nm Light typeinfrared, modulated Sensing angle ± 2° at 1/2 range Ambient lightMax. 5’000 lux
Operating frequency500 Hz
Response time
OFF-ON (tON)≤ 1 ms
ON-OFF (tOFF)≤ 1 ms
Power ON delay (tv)≤ 300 ms
Output function
NPN and PNP Switch selectable
Complementary function Make and break (NO + NC)
Indication function
Output ON LED, yellow
Signal stability ON and power ONLED, green
Installation categoryII (IEC 60664/60664A
Pollution degree3 (IEC 60664/60664A
Degree of protectionIP 67 (IEC 60529 60947-1)
Specifications are subject to change without notice (28.02.2006)1

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
  Add review