RSO2250 CARLO GAVAZZI Selected parameters SYSTEM Output Module LOAD Phase 3 HOUSING WIDTH 45mm to 90mm MOTOR..

Motor Controllers
3-Phase Analog Power Controller
Types RSC-AAM60/RSO .....
• Control and output modules for analogue control of 3-phase induction motors or heaters
• Rated operational current: 3 x 10, 25, 50, 90, 110 AACrms
• Rated operational voltage: Up to 600 VACrms
• Supply voltage range: 10 to 32 VDC
• Control current range: 0 to 20 mA/4 to 20 mA
• LED-indication for line ON and load ON
• Varistor protection
• Approvals: CE, CCC, UL, CSA
Product DescriptionOrdering Key
RSC-AA M 60
The micro processor based controlmoduleRSC-AAM60 is used with outputmodules RSO... toachieve a voltage controlled soft start/softstop of 3-phase motors and a pos- sibility for energy reduction when e.g. a fan is running with a variable capacity. This func- tion is achieved by controlling the control module with a cur- rent between 4 and 20 mA (0 and 20 mA). The outputmod-
ule can be selected according to the rated operational volt- age and the size of the load.
This phase angle controlled soft-start unit can be used for pumps, fans, heaters, lights and many other applications.
LED indicationsforlineON and load ON gives a clear sta- tus indication.
Solid State Relay
Soft starting/stopping Control module Output module Control input type Multivoltage
Rated operational voltage
Rated operational current
RSO 4050
Type Selection, Control Module
Control current MainsMax. operational voltageType Number
0-20 mA/4-20 mAMultivoltage 600 VACRSC-AA M 60
Type Selection, Output Module
Rated operational voltageRated operational current
10 A 25 A 50 A 90 A 110 A
3 x 220 VACRSO 2210 RSO 2225 RSO 2250 RSO 2290 RSO 22110
3 x 400 VACRSO 4010 RSO 4025 RSO 4050 RSO 4090 RSO 40110
3 x 480 VACRSO 4810 RSO 4825 RSO 4850 RSO 4890 RSO 48110
3 x 600 VACRSO 6050 RSO 6090 RSO 60110
General Spec., Control Module Control Specifications
Operational voltage range
Line to line150 to 660 VACrms
Operational frequency range45 to 65 Hz
Supply current
@ no output current< 30 mA
@ max. output current< 180 mA
Supply voltage range10 to 32 VDC CE-marking Yes
ApprovalsUL, CSA, CCC
Minimum output voltage Power supply minus 8 VDC Output current
short-circuit protected≤ 150 mA DC
Thermal Specifications
Operating temperature -20° to +70°C (-4° to +158°F) Storage temperature -40° to +100°C (-40° to +212°F)
Specifications are subject to change without notice (26.03.2010) 1