EF1801PPAS CARLO GAVAZZI Selected parameters SYSTEM Fibre Optic HOUSING M18 SENSING RANGE 60 ... 150 mm CONN..

Photoelectrics
Type EF 1801
FiberOptic Sensor
• Range: Fiber dependent, typ. 100 mm
• Adjustable sensitivity
• Modulated, red light
• Rated operational voltage: 10 to 40 VDC
• Output: DC 200 mA NPN or PNP
• Make and break switching function, LED indication
• Heavy duty M18 metal housing, IP 67
• Cable and plug versions
• For 2.2 mm fiber cable with 1 mm core
• MB 18 A for DIN-rail mounting (see Accessories)
Product Description
Ordering Key
EF 1801PPA S - 1
Used in through-beam, retro- reflective or diffuse-reflective applicationsdepending upon how the additional fibers are mounted. Easily adjustable sensitivity with 270° potentio- meter. LED indication for out-
put ON. Short M18 metal housing for heavy duty appli- cations. The fiber allows posi- tioning and mounting in tight spaces with the photoelectric sensor itself mounted in a more convenient location.
Type
Housing diameter
Range Output type Housing material Connection type
Type Selection
HousingRatedOrdering no.Ordering no.Ordering no. Ordering no. diameter operating NPN/cable NPN/plug PNP/cable PNP/plug
dist. (Sn) Make & break swit.Make & break swit.Make & break swit.Make & break swit.
M18 Fiber depend.EF 1801 NPAS EF 1801 NPAS-1EF 1801 PPAS EF 1801 PPAS-1
Specifications
Rated operating dist. (Sn)Fiber dependent Temperature drift0.4%/K Hysteresis (H)
(Differential travel)3 to 20%
Rated operational volt. (UB)10 to 40 VDC (ripple included)
Ripple (Urpp) ≤10%
Output current
Continuous (Ie) ≤ 200 mA Short-time (I) 200 mA,
max. load capacity 100 nF
No load supply current(IO) ≤ 20 mA, Min. loadcurrent (Im)0.5 mA OFF-state current (Ir)≤ 100 µA Voltage drop (Ud)≤ 2.5 V
ProtectionReverse polarity,
short circuit, transients
Transient voltageMax. 1 kV/0.5 J
SensitivityAdjustable, 270° turn potentiometer,
Light source660 nm
Light type Red,
modulated, synchronized
Operating frequency (f) 120 Hz, light/dark ratio 1:2
Response time
OFF-ON (tON)≤ 3.2 ms
ON-OFF (tOFF) ≤ 5 ms
Power ON delay (tV)Typ. 100 ms
Indication
Output ON LED, yellow
Environment
Overvoltage categoryIII (IEC 60664/664A60947-1) Pollution degree3 (IEC 60664/664A 60947-1) Degree of protectionIP 67 (IEC 60529 60947-1)
Temperature
Operating -20° to +60°C (-4° to 140°F) Storage-30° to + 70°C (-22° to 158°F)
Vibration 10 to 150 Hz, 0.5 mm/7.5 g
(IEC 60068-2-6)
Shock2 x 1 m & 100 x 0.5 m
(IEC 60068-2-32)
Dielectric voltage 500 VAC (rms)
Housing material
BodyNickel-plated brass FrontTPE/POM, black Cable endPolyester, black Nuts Nickel-plated brass
Specifications are subject to change without notice (06.03.2006)1