PD30CNB15NPRT CARLO GAVAZZI Selected parameters SYSTEM Diffuse reflective BGS HOUSING rectangular SENSING RA..

Photoelectrics
Diffuse-reflective, Background Suppression
Type PD30CNB15....RT
• Miniature sensor range
• Range: 150 mm
• Sensitivity adjustment by Teach-In programming
• Modulated, red light 660 nm
• Supply voltage: 10 to 30 VDC
• Output: 100 mA, NPN or PNP preset
• Make or break switching function programmable
• LED indication for output, stability and power ON
• Protection: reverse polarity, short circuit and transients
• Cable and plug versions
• Excellent EMC performance
• Remote teach features
Product Description
Ordering KeyPD30CNB15PPM5RT
ThePD30CNB15sensor familycomesin a compact
10 x 30 x 20 mm reinforced
PMMA/ABS housing.
Thesensorsareusefulin applications wherehigh- accuracy detection as well as small size is required. Compacthousingandhigh powerLED forexcellent performance-size ratio.
The Teach-In function for adjustmentof the sensitivity makes the sensors highly flexible. The output type is preset (NPN or PNP), and the output switching function is NO or NC output.
A remote teach feature allow the sensor to be set up from e.g. a PLC.
Type
Housing style Housing size Housing material Housing length Detection principle Sensing distance Output type
Output configuration Connection type Remote teach
Type Selection
Housing Range ConnectionOrdering no. Ordering no. W x H x D Sn NPNPNP
Make or break switchingMake or break switching
10 x 30 x 20 mm 150 m mCablePD 30 CNB 15 NPRT PD 30 CNB 15 PPRT
10 x 30 x 20 mm 150 m mPlug PD 30 CNB 15 NPM5RTPD 30 CNB 15 PPM5RT
Specifications
Rated operating distance (Sn)Up to 150 mm,
referece target Kodak test card R27, white, 90% reflective, 200 x 200 mm
Blind zone 30 mm
Sensitivity Adjustable by Teach-In
Temperature drift ≤ 0.2%/ºC
Hysteresis (H)
90% White < 10%
18% Grey< 15%
Rated operational volt. (UB )10 to 30 VDC (ripple included)
Ripple (Urpp ) ≤ 10%
Output current
Continuous (Ie) ≤ 100 mA Short-time (I) ≤ 100 mA
(max. load capacity 100 nF)
No load supply current (Io)≤ 32 mA @ 24 VDC
Minimum operational current (Im) 0.5 mA
OFF-state current (Ir ) ≤ 100 µA
Voltage drop (Ud ) ≤ 2.4 VDC @ 100 mA
Protection Short-circuit, reverse polarity and transients
Light source GaAlAs, LED, 660 nm Light typeRed, modulated Sensing angle ± 2º
Ambient light10,000 lux
Light spot110 mm @ 1.5 m
Operating frequency1000 Hz
Response time
OFF-ON (tON)≤ 0.5 ms
ON-OFF (tOFF ) ≤ 0.5 ms
Power ON delay (tv) ≤ 400 ms
Output function
NPN and PNPPreset
NO/NC switching function Set up by button
Remote teach function
Teach on 0 to 2.5 VDC (NPN)
5 to 30 VDC (PNP)
Tamper proof When activated more than
20 sec. the sensor goes into a Tamper proof mode.
Indication
Output ON LED, yellow
Signal stability ON and power ON LED, green
Specifications are subject to change without notice (19.08.2010) 1