GP62203303724 CARLO GAVAZZI Selected parameters MODULE TYPE Carpark sensor with bus-controlled 3-colour LED ..

Dupline® Car Park System
Type GP6220 330x
3-Colour Ultrasonic Sensor
• Ultrasonic sensor with a 3-colour LED indicator
• LED colour control via the bus
• Low current consumption
• Self-calibration of the sensor can be performed globally on all sensors at once or locally on a single sensor
• Automatic temperature compensation
• Wide measuring range
• Protected against dust and moisture
• Dupline® 3-wire bus system with power
• Address coding with Carpark Configurator GP73800080
• GP6220 3301 has a built in red/green/amber LED indicator
• GP6220 3302 has a built in red/green/blue LED indicator
• GP6220 3303 has a built in red/blue/amber LED indicator
• cULus approved
Product Description
Ordering key
GP 6220 330x 724
GP6220330x is an ultrasonic sensor with a built-in3 col- our LED indicator and part of the Dupline®parking guid- ance system.
TheGP6220330xsensor is installed in the middle of the ceiling above the parking bayanddetectswhethera car is parked in the bay. The parking bay status is indicat- ed using the built in LEDs. Thecolourofthebuilt-in LEDindicatoriscontrolled viathebusbyanexternal device (e.g. a PC or a PLC). Different colour combina- tionsareavailabletofacil- itatedifferentapplications. E.g.thecombination red/ green/ambercanbeused
in a parking facility withan automated bookingsystem, and amber can indicate spaces booked for a specific event or for VIPs.
Each sensor needs to be connectedtotheDupline®
3-wire bus. The bus pro- videspower andenables the sensors totransmitthe statusoftheparkingbays to the carpark monitoring devices (GP3482 9091 724- X), which keep track of the number of free parking bays in an area and show the result on the connected dis- plays.
Type: Dupline®
Housing Input type Addresses Inputs Supply
Type Selection
GP6220 3301 724 Sensor with red/green/amber LED GP6220 3302 724 Sensor with red/green/blue LED GP6220 3303 724 Sensor with red/blue/amber LED
Input/Output Specifications Supply Specifications
RJ12 connectorforaddressprogramming with Carpark Configurator GP7380 0080
2x3-pin connector • Printeddotonthe sensor is Dupline® +
• D- or Gnd
• POW (power from DMM or Coupler). See draw- ing on page 3 (System diagram)
1x2-pin connector Not in use.
NOTE: The sensorconnectorsare usingthe“push-wire connection”methode. Use a 1.5 mm2single core wire for the sensor installation.
Power supply: 21 VDC min. 30 VDC max. (Overvoltage category
III (IEC60664))
Max. supply current20 mA
Nominal Supply 28 VDC / 19 mA
0,53 W
Specifications are subject to change without notice (05.08.2014) 1