G88101102 CARLO GAVAZZI Selected parameters MAIN CHARACTERISTICS Input module HOUSING Decentral POWER SUPPLY..

Remote Voltage Input
Type G 8810 1102
Duline®
FieldbusInstallationbus
• 1-channel monostable transmitter
• 1 opto-isolated voltage input 90-265 VAC
• Powered via Dupline®
• Compact housing
• Address coding by GAP 1605
Product Description Ordering Key
G 8810 1102
G8810 1102 is a 1 channel Dupline® supplied transmitter with 1 voltage input. The module is especially designed for the use in building auto- mationapplicationswhere it allowsaflexibleinstallation
conceptfeaturing a separate power and signal (control) bus.The compact size of the module makes it possible to fit it in a junction box or direct- ly behind a power outlet.
Type: Dupline® Housing Transmitter
No. of channels
Input type
Type Selection
Ordering no.
1 channel, voltage input 90-265 VAC
G 8810 1102
InputSpecifications
Input
Input 90-265 VAC
Input connection Red and blue wire
2 x 1.5 mm2, 150 mm, single core, isolation 250 V
ON³ 90 VAC OFF£ 60 VAC
Dielectric voltage
Input-Dupline®³ 4 kVAC (rms)
General Specifications
Channel coding By GAP 1605 and special cable: GAP-THP-CAB
No. of channels 1
Environment
Degree of protection IP 20
Pollution degree3 (IEC 60664)
Operating temperature-20 - +50 °C (-4 - +122°F) Storage temperature -50 - +70°C (-58 - +158°F)
Humidity (non condensing)20 - 80%
Weight50 g
Supply SpecificationsModeof Operation
Supplied by Dupline®
Consumption, unactivatedTyp. 1 mA Consumption, activatedTyp. 1.4 mA
Dupline connection® White and black wire
Power-on delay Typ. 2 s
Power dissipation
@ max. input voltage0.5 W
The address may be coded by means of the codepro- grammer GAP 1605, with GAP-THP-CAB cable.
When the voltage on the input wires exceeds 90 VAC, the transmitter is activated and when the voltage drops below 60 VAC the transmis- sion stops.
Specifications are subject to change without notice (11.05.04)1
Dupline®is a registered trademark. A product of the CARLO GAVAZZI Group