G34860059230 CARLO GAVAZZI Selected parameters MAIN CHARACTERISTICS Converter/Repeater HOUSING DIN-rail POWE..

Dupline Wireless Base Unitwith External
Antenna
Type G3486 0059 230
Duline®
FieldbusInstallationbus
• Dupline transceiver for building automation applications
• Easy to install in both old and new installations
• Unlimited number of connected wireless switches
G8x86 440x 703
• DIN-rail mounting
• Range up to 100 m in open air
• Easy to operate
• External antenna
Product Description
Ordering key
G 3486 0059 230
The G3486 0059230wire- less base station is dedi- cated for G8x86 440x 703 wireless switches. The units communicate at 868 MHz. The base station is built into a standard H4 plastic hous- ing.Theantennamustbe
placed outside metal cabi- nets or in open areas in order to avoid loss of range.
The wireless Base unit is Capable of controlling a unlimited number of wireless switches.The wireless sys- tem is built for smarthouse.
Type: Dupline®
Housing Input type Channels Inputs
Colour/Input type
Supply
InputSpecifications
• Wireless communication at 868 MHz.
Supply Specifications
Power supply AC typesOvervoltage cat. III (IEC60664) Rated operational voltage
through term. 21 & 22 230230 VAC, ±15%
Frequency45 to 65 Hz Voltage drop-out 40 ms Rated operational powerTyp. 3 VA Power dissipation 3 W
Rated impulse voltage 230 4 kV Dielectric voltage
Supply – Dupline®4 kVAC (rms)
General Specification
Power ON DelayTyp. 2 s
Indication of
Power ON Green LED Dupline®signalYellow LED Wireless communication ONGreen LED AssociationRed LED Disable RFRed LED
Environment
Protection degree IP 20
Pollution degree3 (IEC 60664)
Operating temperature-20°C to +50°C (-4° to + 122°F) Storage temperature -50°C to +85°C (-58° to +185°F)
Humidity (non-condensing)20 to 80%
Mechanical resistance
Shock15 G (11 ms) Vibration2 G (6 to 55 Hz)
Dimensions72 x 77 x 70 mm
Material
(see “Techical information”) H4 housing
AntennaThe Ant 1 is used, but not included
Weight250 g
Special conditionsIf the wireless base unit is placed in a metal cabinet or another kind of metal installation, it might reduce its range.
Therefore the antenna must be placed outside the cabinet or in open areas.
Specifications are subject to change without notice (24.04.2007)1
Dupline®is a registered trademark. A product of the CARLO GAVAZZI Group