EM33DINAV33XXSX CARLO GAVAZZI Selected parameters FUNCTION Energy Meters MOUNTING DIN Rail POWER SUPPLY Self..

Energy Management
Energy Meter
Type EM33DIN
• Easy connections management
• Certified according to MID Directive (option PF only):
see “how to order” below
• Other version available (not certified, option X):
see “how to order” on the next page
Product Description
• Class 1 (kWh) according to EN62053-21
• Class B (kWh) according to EN50470-1-3
• Accuracy ±0.5% RDG (current/voltage)
• Three –phase energy meter
• Instantaneous variables readout: 3 DGT
• Energies readout: 7 DGT
• System variables: W, phase-sequence.
• Single phase variables: A, V
• Energy measurements: total kWh
• TRMSmeasurementsof distorted sine waves
(voltages/currents)
• Direct connection up to 32A
• RS485 serial communication port (MODBUS-RTU), iFIX SCADA compatibility
• Self power supply
• Dimensions: 4-DIN modules
• Protection degree (front): IP50
• Certified according to MID Directive, Annex "B"+ Annex “D”for legal metrology relevant to active electricalenergymeters(seeAnnexMI-003),see
option “PF” below.
Three-phase energy meter with built-in configuration joystick and LCD data displayingparticularly
indicated for active energy metering and for cost allocation.Housingfor DIN-rail mounting with IP50
(front) protection degree. Direct connection up to 32A, moreoverthemeteris
provided with serial communication port.
MID
Certified according to MID Directive, Annex "B" + Annex "D" for legal metrolo- gyrelevanttoactiveelectricalenergy
How to orderEM33 DINAV3 3 X XS PF
Model
Range code
meter (see Annex MI-003 of MID). Can be used for fis-
cal (legal) metrology.
System
Power supply
Output
Option
Type Selection
Range codes
AV3: 400VLL AC - 5(32)A (direct connection)
VLN : 184V to 276VLN VLL : 318V to 480VLL
System
3:unbalanced load:
3-phase, 4-wire
Power supply
X: Self power supply
-15% +20% of the rated measuring input voltage,
45 to 65 Hz
Output
XS: RS485 port
Options
AV33
X XSPF
NOTE: please check the avail- ability of the needed code on theverification pathdiagram on left before ordering.
PF: Certified according to MID Directive, Annex "B" + Annex "D" for legal metrol- ogy relevant to active electrical energy meter (see Annex MI-003 of MID). Can be used for fiscal (legal) metrology.
Specifications are subject to change without notice EM33DIN DS ENG 261112 1