NA13CT CARLO GAVAZZI Selected parameters FUNCTION Emergency stop SAFETY CATEGORY 3 SAFETY OUTPUT 3 NO Others..

Emergency Stop and Safety Gate Modules
NA13CT
• Safety Category 3 according to EN 954-1
• Category 1 Emergency Stop
• 3 NO delayed safety outputs
• 1 NC auxiliary delayed output
• 24 VDC or 18 VAC power supply
• Single channel operation
• Automatic or manual reset
• Failure diagnosis by LEDs
Product Description
Ordering Key
NA13 C T
Emergency Stop and Safety Gate modules for category 1 emergency STOP according to
EN 60204-1, EN 292-1 /-2, EN
418, EN 1088 and EN 954-1.
Housing Application Controlled Devices Safety Outputs Safety Category Delayed Outputs
Electrical Specifications
Power supply 18 VAC ± 10% 50-60Hz /
24 VDC ± 10%
Power consumption2 VA / 2 W Safety outputs3 NO delayed Auxiliary outputs1 NC delayed Contact ratings
Resistive loads AC1 6 A @ 230 VAC
Small inductive loads AC15 3 A @ 230 VAC
DC13 3 A @ 24 VDC (50000 cycles)
Safety output
contact fuse protection 4 A fast or 4 A delayed
Insulation voltage
Supply to inputnone
Supply to output 4 kV 1.2/50µs
Input to output4 kV 1.2/50µs
Pollution degree 2
Overvoltage category III
TimeSpecificationsEnvironmental Specifications
Delay on energisation ≤ 100 ms
Delay on de-energisation1.2 s ± 0.5 sec @ 24 VDC
Recovery timeTd + 0,4 s Delay time Td 1 s Channel simultaneity Infinite
Operating temperature-25°C ... + 65°C
Storage temperature -25°C ... + 65°C
Mechanical Specifications
Protection degree terminals IP 20
Protection degree housing IP 40
Max cross section
of external conductors2.5 mm2 flexible wire
2
Housing materialPolyamid PA 6.6
2.5 mm
rigid wire
Housing type22.5 mm housing models
MountingDIN rail
Dimensions22.5 x 99 x 114 mm
Weight 200 g
Specifications are subjected to change without notice (20.04.07) 1