RPD-75A RPD75A MEANWELL Eingang: 90-264 AC / 127-370 DC, Ausgabe: 2, V1: 5, A1: 7, V2: 12, A2: 3 Vergrößern
Die Bilder sind nur orientativ. Bitte prüfen Sie das Artikelstammdatenblatt.

RPD-75A RPD75A MEANWELL Eingang: 90-264 AC / 127-370 DC, Ausgabe: 2, V1: 5, A1: 7, V2: 12, A2: 3

RPD-75A

RPD75A

MEANWELL

Verfügbar

Schiff am heute

Eingang: 90-264 AC / 127-370 DC, Ausgabe: 2, V1: 5, A1: 7, V2: 12, A2: 3

Mehr Infos


Spannungsversorgungen

OPENFRAME MEDICAL

RPD

* Neues Produkt in der Originalverpackung mit allen Garantien und Zertifizierungen von MEANWELL

MengePreis
1+$33.89
9+$30.29
17+$29.60
25+$29.25
34+$29.00
*Dieser Preis ist pro Einheit und ist der Nettowert (ohne Steuern, falls zutreffend).

Wie es funktioniert

Wie funktioniert das?

1 Fügen Sie die Produkte Ihrer Wahl in den Warenkorb
2 Geben Sie Ihre Kontaktdaten und senden Sie Ihre Anfrage
3 Sie werden per E-Mail mit unseren Preisvorschläge mitzuteilen
4 Beenden Sie einfach Ihre Bestellung und Sie erhalten die Produkte

Es gibt verschiedene Möglichkeiten die Zahlung abzuwickeln
- Kreditkarte
- Banküberweisung
- PayPal


Verwandte Produkte

Mehr Infos



75W Dual Output Medical Type 75W Dual Output Medical Type
75W Dual Output Medical Type RPD-75series RPD-75series
RPD-75series Features : Features :
Features : Universal AC input / Full range Universal AC input / Full range
Universal AC input / Full range Low leakagecurrent<100A Low leakagecurrent<100A
Low leakagecurrent<100A Protections: Short circuit / Overload/ Over voltage Protections: Short circuit / Overload/ Over voltage
Protections: Short circuit / Overload/ Over voltage Free air convection for rated power and 23.5CFM forced air Free air convection for rated power and 23.5CFM forced air
Free air convection for rated power and 23.5CFM forced air convection for peak load convection for peak load
convection for peak load Medical safety approved (2 x MOPPbetweenprimaryto secondary) Medical safety approved (2 x MOPPbetweenprimaryto secondary)
Medical safety approved (2 x MOPPbetweenprimaryto secondary) Fixed switchingfrequencyat 65KHz Fixed switchingfrequencyat 65KHz
Fixed switchingfrequencyat 65KHz 3 years warranty 3 years warranty
3 years warranty SPECIFICATION SPECIFICATION
SPECIFICATION MODEL MODEL
MODEL OUTPUT NUMBER DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER OUTPUT NUMBER DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER
OUTPUT NUMBER DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER PEAK LOAD (23.5CFM) PEAK LOAD (23.5CFM)
PEAK LOAD (23.5CFM) RPD-75A RPD-75A
RPD-75A CH1 CH1
CH1 5V 5V
5V 7A 7A
7A 1 ~ 9.5A 1 ~ 9.5A
1 ~ 9.5A 71W 71W
71W 95.5W 95.5W
95.5WCH2 CH2
CH2 12V 12V
12V 3A 3A
3A 0.3 ~ 4A 0.3 ~ 4A
0.3 ~ 4A RPD-75B RPD-75B
RPD-75B CH1 CH1
CH1 5V 5V
5V 5A 5A
5A 1 ~ 6.8A 1 ~ 6.8A
1 ~ 6.8A 73W 73W
73W 98.8W 98.8W
98.8WCH2 CH2
CH2 24V 24V
24V 2A 2A
2A 0.2 ~ 2.7A 0.2 ~ 2.7A
0.2 ~ 2.7A OUTPUT OUTPUT
OUTPUT RIPPLE & NOISE (max.) Note.2 80mVp-p RIPPLE & NOISE (max.) Note.2 80mVp-p
RIPPLE & NOISE (max.) Note.2 80mVp-p 120mVp-p 120mVp-p
120mVp-p 80mVp-p 80mVp-p
80mVp-p 200mVp-p 200mVp-p
200mVp-p VOLTAGE ADJ. RANGE VOLTAGE ADJ. RANGE
VOLTAGE ADJ. RANGE CH1: 4.75 ~ 5.5V CH1: 4.75 ~ 5.5V
CH1: 4.75 ~ 5.5V CH1: 4.75 ~ 5.5V CH1: 4.75 ~ 5.5V
CH1: 4.75 ~ 5.5V VOLTAGE TOLERANCE Note.32.0% VOLTAGE TOLERANCE Note.32.0%
VOLTAGE TOLERANCE Note.32.0% 6.0% 6.0%
6.0% 2.0% 2.0%
2.0% 6.0% 6.0%
6.0% LINE REGULATION LOAD REGULATION LINE REGULATION LOAD REGULATION
LINE REGULATION LOAD REGULATION 0.5% 0.5%
0.5% 1.5% 1.5%
1.5% 1.0% 1.0%
1.0% 3.0% 3.0%
3.0% 0.5% 0.5%
0.5% 1.5% 1.5%
1.5% 1.0% 1.0%
1.0% 3.0% 3.0%
3.0%INPUT INPUT
INPUT SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT (Typ.) SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT (Typ.)
SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) INRUSH CURRENT (Typ.)
INRUSH CURRENT (Typ.) 500ms, 30ms/230VAC 500ms, 30ms/115VAC at full load 500ms, 30ms/230VAC 500ms, 30ms/115VAC at full load
500ms, 30ms/230VAC 500ms, 30ms/115VAC at full load 80ms/230VAC20ms/115VAC at full load 80ms/230VAC20ms/115VAC at full load
80ms/230VAC20ms/115VAC at full load 90 ~ 264VAC 127 ~ 370VDC 90 ~ 264VAC 127 ~ 370VDC
90 ~ 264VAC 127 ~ 370VDC 47 ~ 63Hz 47 ~ 63Hz
47 ~ 63Hz 77% 77%
77% 1.5A/115VAC1A/230VAC 1.5A/115VAC1A/230VAC
1.5A/115VAC1A/230VAC COLD START 25A/115VAC 50A/230VAC COLD START 25A/115VAC 50A/230VAC
COLD START 25A/115VAC 50A/230VAC79% 79%
79%PROTECTION PROTECTION
PROTECTION ENVIRONMENT ENVIRONMENT
ENVIRONMENT LEAKAGE CURRENTNote.7 LEAKAGE CURRENTNote.7
LEAKAGE CURRENTNote.7OVERLOAD OVERLOAD
OVERLOAD OVER VOLTAGE WORKING TEMP. OVER VOLTAGE WORKING TEMP.
OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION WORKING HUMIDITY STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION
WORKING HUMIDITY STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY STANDARDS
SAFETY STANDARDS Earth leakage current < 150A/264VAC , Touch current < 100A/264VAC Earth leakage current < 150A/264VAC , Touch current < 100A/264VAC
Earth leakage current < 150A/264VAC , Touch current < 100A/264VAC 140 ~ 180% rated output power 140 ~ 180% rated output power
140 ~ 180% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed Protection type : Hiccup mode, recovers automatically after fault condition is removed
Protection type : Hiccup mode, recovers automatically after fault condition is removed CH1: 5.75 ~ 6.75V CH1: 5.75 ~ 6.75V
CH1: 5.75 ~ 6.75V Protection type : Shut down o/p voltage, re-power on to recover Protection type : Shut down o/p voltage, re-power on to recover
Protection type : Shut down o/p voltage, re-power on to recover -20 ~ +70c (Refer to "Derating Curve") -20 ~ +70c (Refer to "Derating Curve")
-20 ~ +70c (Refer to "Derating Curve") 20 ~ 90% RH non-condensing 20 ~ 90% RH non-condensing
20 ~ 90% RH non-condensing -40 ~ +85c, 10 ~ 95% RH -40 ~ +85c, 10 ~ 95% RH
-40 ~ +85c, 10 ~ 95% RH 0.03%/c (0 ~ 45c) 0.03%/c (0 ~ 45c)
0.03%/c (0 ~ 45c) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1 approved ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1 approved
ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1 approved SAFETY & SAFETY &
SAFETY & ISOLATION LEVELPrimary-Secondary:2xMOPP, Primary-Earth:1xMOPP ISOLATION LEVELPrimary-Secondary:2xMOPP, Primary-Earth:1xMOPP
ISOLATION LEVELPrimary-Secondary:2xMOPP, Primary-Earth:1xMOPP EMC EMC
EMC (Note 4) (Note 4)
(Note 4) OTHERS OTHERS
OTHERS WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION
WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF DIMENSION EMC IMMUNITY MTBF DIMENSION
EMC IMMUNITY MTBF DIMENSION PACKING PACKING
PACKING I/P-O/P:4KVAC I/P-FG:2KVACO/P-FG:1.5KVAC I/P-O/P:4KVAC I/P-FG:2KVACO/P-FG:1.5KVAC
I/P-O/P:4KVAC I/P-FG:2KVACO/P-FG:1.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25c/ 70% RH I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25c/ 70% RH
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25c/ 70% RH Compliance to EN55011 (CISPR11), EN55022 (CISPR22) Class B, EN61000-3-2,-3 Compliance to EN55011 (CISPR11), EN55022 (CISPR22) Class B, EN61000-3-2,-3
Compliance to EN55011 (CISPR11), EN55022 (CISPR22) Class B, EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN60601-1-2, EN61000-6-2, EN61204-3, heavy industry level, EN61204-3 medical level, criteria A Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN60601-1-2, EN61000-6-2, EN61204-3, heavy industry level, EN61204-3 medical level, criteria A
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN60601-1-2, EN61000-6-2, EN61204-3, heavy industry level, EN61204-3 medical level, criteria A 569.9K hrs min.MIL-HDBK-217F (25c) 569.9K hrs min.MIL-HDBK-217F (25c)
569.9K hrs min.MIL-HDBK-217F (25c) 127*76.2*31mm (L*W*H) 127*76.2*31mm (L*W*H)
127*76.2*31mm (L*W*H) 0.25Kg; 63pcs/16.7Kg/1.35CUFT 0.25Kg; 63pcs/16.7Kg/1.35CUFT
0.25Kg; 63pcs/16.7Kg/1.35CUFTNOTE NOTE
NOTE1. All parameters NOT specially mentioned are measured at 230VAC input, ratedload and 25c of ambient temperature. 1. All parameters NOT specially mentioned are measured at 230VAC input, ratedload and 25c of ambient temperature.
1. All parameters NOT specially mentioned are measured at 230VAC input, ratedload and 25c of ambient temperature. 2. Ripple & noiseare measured at 20MHz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 2. Ripple & noiseare measured at 20MHz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
2. Ripple & noiseare measured at 20MHz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 3. Tolerance : includes set up tolerance, line regulation and load regulation.
3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to performthese EMC tests, please refer to "EMI testingof component powersupplies." EMC directives. For guidance on how to performthese EMC tests, please refer to "EMI testingof component powersupplies."
EMC directives. For guidance on how to performthese EMC tests, please refer to "EMI testingof component powersupplies." (asavailable on http://www.meanwell.com) (asavailable on http://www.meanwell.com)
(asavailable on http://www.meanwell.com) 5. Lengthof set up time is measured at cold first start.Turning ON/OFF the power supply may lead to increase of the set up time. 5. Lengthof set up time is measured at cold first start.Turning ON/OFF the power supply may lead to increase of the set up time.
5. Lengthof set up time is measured at cold first start.Turning ON/OFF the power supply may lead to increase of the set up time. 6. HeatSink HS1,HS2,HS3 can not be shorted. 6. HeatSink HS1,HS2,HS3 can not be shorted.
6. HeatSink HS1,HS2,HS3 can not be shorted. 7. Touch currentwas measured from primary input to DC output. 7. Touch currentwas measured from primary input to DC output.
7. Touch currentwas measured from primary input to DC output.File Name:RPD-75-SPEC2014-12-08 File Name:RPD-75-SPEC2014-12-08
File Name:RPD-75-SPEC2014-12-08

Datasheet - PDF

Title:Language:Size:Type:
pdf-Eingang: 90-264 AC / 127-370 DC, Ausgabe: 2, V1: 5, A1: 7, V2: 12, A2: 3 - MEANWELL - RPD-75A - RPD75AEnglish212 Kbytespdf-Eingang: 90-264 AC / 127-370 DC, Ausgabe: 2, V1: 5, A1: 7, V2: 12, A2: 3 - MEANWELL - RPD-75A - RPD75A

Bewertungen (0)

Es gibt keine Produktbewertungenvor.

Bewertung abgeben
Formular verstecken
Wertung:
Name:
E-Mail :
Betreff:
Text:
  Captcha
  Bewertung abgeben
Sie verwirrt?

Wenn Sie Fragen Kauf haben, können Sie die folgenden Links oder E-Mail

Bitte warten





* Pflichtfelder

oder