PSC-100A PSC100A MEANWELL Eingang: 90-264 AC / 127-370 DC, Ausgabe: 1, V1: 13,8, A1: 4 Vergrößern
Die Bilder sind nur orientativ. Bitte prüfen Sie das Artikelstammdatenblatt.

PSC-100A PSC100A MEANWELL Eingang: 90-264 AC / 127-370 DC, Ausgabe: 1, V1: 13,8, A1: 4

PSC-100A

PSC100A

MEANWELL

Verfügbar

Schiff am heute

Eingang: 90-264 AC / 127-370 DC, Ausgabe: 1, V1: 13,8, A1: 4

Mehr Infos


Spannungsversorgungen

SICHERHEIT

PSC

* Neues Produkt in der Originalverpackung mit allen Garantien und Zertifizierungen von MEANWELL

MengePreis
1+$42.81
7+$38.80
14+$37.86
20+$37.44
27+$37.13
*Dieser Preis ist pro Einheit und ist der Nettowert (ohne Steuern, falls zutreffend).

Wie es funktioniert

Wie funktioniert das?

1 Fügen Sie die Produkte Ihrer Wahl in den Warenkorb
2 Geben Sie Ihre Kontaktdaten und senden Sie Ihre Anfrage
3 Sie werden per E-Mail mit unseren Preisvorschläge mitzuteilen
4 Beenden Sie einfach Ihre Bestellung und Sie erhalten die Produkte

Es gibt verschiedene Möglichkeiten die Zahlung abzuwickeln
- Kreditkarte
- Banküberweisung
- PayPal


Verwandte Produkte

Mehr Infos



100W Single Output with Battery Charger(UPS Function) 100W Single Output with Battery Charger(UPS Function)
100W Single Output with Battery Charger(UPS Function) PSC-100series PSC-100series
PSC-100series UniversalAC input / Full range UniversalAC input / Full range
UniversalAC input / Full range 5"x3"compact size 5"x3"compact size
5"x3"compact size Models with L-Bracket and cover available (PSC-100x-C, x=A,B) Models with L-Bracket and cover available (PSC-100x-C, x=A,B)
Models with L-Bracket and cover available (PSC-100x-C, x=A,B) Protections: Short circuit / Overload / Over voltage Protections: Short circuit / Overload / Over voltage
Protections: Short circuit / Overload / Over voltage Battery low protection / Battery reverse polarity protection by fuse Battery low protection / Battery reverse polarity protection by fuse
Battery low protection / Battery reverse polarity protection by fuse Relay contact signal output for AC OK and Battery Low Relay contact signal output for AC OK and Battery Low
Relay contact signal output for AC OK and Battery Low Cooling by free air convection Cooling by free air convection
Cooling by free air convection 100% full load burn-in test 100% full load burn-in test
100% full load burn-in test 2 years warranty 2 years warranty
2 years warranty .. ..
.. SPECIFICATION SPECIFICATION
SPECIFICATIONPSC-100A -C =Blank,-C ; Blank=PCBonly, -C=Enclosed type PSC-100A -C =Blank,-C ; Blank=PCBonly, -C=Enclosed type
PSC-100A -C =Blank,-C ; Blank=PCBonly, -C=Enclosed typeMODEL MODEL
MODELOUTPUT NUMBER DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER OUTPUT NUMBER DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER
OUTPUT NUMBER DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER PSC-100A PSC-100A
PSC-100A CH1 CH1
CH1 13.8V 13.8V
13.8V 4.75A 4.75A
4.75A 0 ~ 7A 0 ~ 7A
0 ~ 7A 100.05W 100.05W
100.05WCH2 CH2
CH2 13.8V 13.8V
13.8V 2.5A 2.5A
2.5A -------- --------
-------- PSC-100B PSC-100B
PSC-100B CH1 CH1
CH1 27.6V 27.6V
27.6V 2.4A 2.4A
2.4A 0 ~ 3.5A 0 ~ 3.5A
0 ~ 3.5A 100.74W 100.74W
100.74WCH2 CH2
CH2 27.6V 27.6V
27.6V 1.25A 1.25A
1.25A -------- --------
--------OUTPUT OUTPUT
OUTPUT RIPPLE & NOISE (max.) Note.2100mVp-p RIPPLE & NOISE (max.) Note.2100mVp-p
RIPPLE & NOISE (max.) Note.2100mVp-p -------- --------
-------- 100mVp-p 100mVp-p
100mVp-p -------- --------
-------- VOLTAGE ADJ. RANGE VOLTAGE ADJ. RANGE
VOLTAGE ADJ. RANGE CH1: 12 ~ 15V CH1: 12 ~ 15V
CH1: 12 ~ 15V CH1: 24 ~ 29V CH1: 24 ~ 29V
CH1: 24 ~ 29V VOLTAGE TOLERANCE Note.31.0% VOLTAGE TOLERANCE Note.31.0%
VOLTAGE TOLERANCE Note.31.0% -------- --------
-------- 1.0% 1.0%
1.0% -------- --------
-------- LINE REGULATION LOAD REGULATION LINE REGULATION LOAD REGULATION
LINE REGULATION LOAD REGULATION 0.5% 0.5%
0.5% 0.5% 0.5%
0.5% -------- --------
-------- -------- --------
-------- 0.5% 0.5%
0.5% 0.5% 0.5%
0.5% -------- --------
-------- -------- --------
--------INPUT INPUT
INPUT SETUP, RISE TIMENote.4 SETUP, RISE TIMENote.4
SETUP, RISE TIMENote.4 HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT (Typ.) HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT (Typ.)
HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) INRUSH CURRENT (Typ.)
INRUSH CURRENT (Typ.) LEAKAGE CURRENT LEAKAGE CURRENT
LEAKAGE CURRENT 2400ms, 30ms/230VAC 2400ms, 30ms/115VAC at full load 2400ms, 30ms/230VAC 2400ms, 30ms/115VAC at full load
2400ms, 30ms/230VAC 2400ms, 30ms/115VAC at full load 40ms/230VAC16ms/115VAC at full load 40ms/230VAC16ms/115VAC at full load
40ms/230VAC16ms/115VAC at full load 90 ~ 264VAC127 ~ 370VDC 90 ~ 264VAC127 ~ 370VDC
90 ~ 264VAC127 ~ 370VDC 47 ~ 63Hz 47 ~ 63Hz
47 ~ 63Hz 86% 86%
86% 2A/115VAC1.2A/230VAC 2A/115VAC1.2A/230VAC
2A/115VAC1.2A/230VAC COLD START 35A/115VAC 70A/230VAC COLD START 35A/115VAC 70A/230VAC
COLD START 35A/115VAC 70A/230VAC <1mA / 240VAC <1mA / 240VAC
<1mA / 240VAC 105 ~ 150% rated output power 105 ~ 150% rated output power
105 ~ 150% rated output power88% 88%
88% OVERLOAD OVERLOAD
OVERLOAD Protection type : Hiccup mode, recovers automatically after fault condition is removed Protection type : Hiccup mode, recovers automatically after fault condition is removed
Protection type : Hiccup mode, recovers automatically after fault condition is removed PROTECTION PROTECTION
PROTECTION OVER VOLTAGE BATTERY CUT OFF OVER VOLTAGE BATTERY CUT OFF
OVER VOLTAGE BATTERY CUT OFF CH1:14.49 ~ 18.63V CH1:14.49 ~ 18.63V
CH1:14.49 ~ 18.63V Protection type : Shut down o/p voltage, re-power on to recover Protection type : Shut down o/p voltage, re-power on to recover
Protection type : Shut down o/p voltage, re-power on to recover 100.5V 100.5V
100.5V CH1:28.98 ~ 37.26V CH1:28.98 ~ 37.26V
CH1:28.98 ~ 37.26V201V 201V
201VALARM FUNCTION ALARM FUNCTION
ALARM FUNCTION AC OKNote.6Relay contact output, ON : AC OK ; OFF : AC Fail ; Max. rating : 30V / 1A AC OKNote.6Relay contact output, ON : AC OK ; OFF : AC Fail ; Max. rating : 30V / 1A
AC OKNote.6Relay contact output, ON : AC OK ; OFF : AC Fail ; Max. rating : 30V / 1A Relay contact output, OFF : Battery OK ; ON : Battery Low ; Max. rating : 30V / 1A Relay contact output, OFF : Battery OK ; ON : Battery Low ; Max. rating : 30V / 1A
Relay contact output, OFF : Battery OK ; ON : Battery Low ; Max. rating : 30V / 1A BATTERY LOW BATTERY LOW
BATTERY LOW Battery low voltage : < 11VBattery low voltage : < 22V Battery low voltage : < 11VBattery low voltage : < 22V
Battery low voltage : < 11VBattery low voltage : < 22VENVIRONMENT ENVIRONMENT
ENVIRONMENTSAFETY & EMC SAFETY & EMC
SAFETY & EMC (Note 4) (Note 4)
(Note 4)OTHERS OTHERS
OTHERS WORKING TEMP. WORKING HUMIDITY STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION WORKING TEMP. WORKING HUMIDITY STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION
WORKING TEMP. WORKING HUMIDITY STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION SAFETY STANDARDS WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION
SAFETY STANDARDS WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF DIMENSION EMC IMMUNITY MTBF DIMENSION
EMC IMMUNITY MTBF DIMENSION PACKING PACKING
PACKING -20 ~ +70 (Refer to "Derating Curve") -20 ~ +70 (Refer to "Derating Curve")
-20 ~ +70 (Refer to "Derating Curve") 20 ~ 90% RH non-condensing 20 ~ 90% RH non-condensing
20 ~ 90% RH non-condensing -20 ~ +85, 10 ~ 95% RH -20 ~ +85, 10 ~ 95% RH
-20 ~ +85, 10 ~ 95% RH 0.03%/ (0~50) on CH1 output 0.03%/ (0~50) on CH1 output
0.03%/ (0~50) on CH1 output 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 approved UL60950-1, TUV EN60950-1 approved
UL60950-1, TUV EN60950-1 approved I/P-O/P:3KVAC I/P-FG:2.0KVACO/P-FG:0.5KVAC I/P-O/P:3KVAC I/P-FG:2.0KVACO/P-FG:0.5KVAC
I/P-O/P:3KVAC I/P-FG:2.0KVACO/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level,criteria A Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level,criteria A
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level,criteria A 417.6K hrs min.MIL-HDBK-217F (25) 417.6K hrs min.MIL-HDBK-217F (25)
417.6K hrs min.MIL-HDBK-217F (25) PCB:127*76.2*31mm (L*W*H) ; Enclosed type:130*85*37mm (L*W*H) PCB:127*76.2*31mm (L*W*H) ; Enclosed type:130*85*37mm (L*W*H)
PCB:127*76.2*31mm (L*W*H) ; Enclosed type:130*85*37mm (L*W*H) PCB:0.23Kg; 63pcs/15.5Kg/1.35CUFT ; Enclosed type:0.44Kg;32pcs/15Kg/0.64CUFT PCB:0.23Kg; 63pcs/15.5Kg/1.35CUFT ; Enclosed type:0.44Kg;32pcs/15Kg/0.64CUFT
PCB:0.23Kg; 63pcs/15.5Kg/1.35CUFT ; Enclosed type:0.44Kg;32pcs/15Kg/0.64CUFTNOTE NOTE
NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, ratedload and 25 of ambient temperature. 1. All parameters NOT specially mentioned are measured at 230VAC input, ratedload and 25 of ambient temperature.
1. All parameters NOT specially mentioned are measured at 230VAC input, ratedload and 25 of ambient temperature. 2. Ripple & noiseare measured at 20MHz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 2. Ripple & noiseare measured at 20MHz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
2. Ripple & noiseare measured at 20MHz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 3. Tolerance : includes set up tolerance, line regulation and load regulation.
3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Lengthof set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time. 4. Lengthof set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.
4. Lengthof set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time. 5. Heatsink HS2,HS3 can not be shorted. 5. Heatsink HS2,HS3 can not be shorted.
5. Heatsink HS2,HS3 can not be shorted. 6. Heatsink HS2,HS3 must havesafety isolation distance from system case. 6. Heatsink HS2,HS3 must havesafety isolation distance from system case.
6. Heatsink HS2,HS3 must havesafety isolation distance from system case. 7. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets 7. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
7. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to performthese EMC tests, please refer to "EMI testingof component powersupplies." EMC directives. For guidance on how to performthese EMC tests, please refer to "EMI testingof component powersupplies."
EMC directives. For guidance on how to performthese EMC tests, please refer to "EMI testingof component powersupplies." (asavailable on http://www.meanwell.com) (asavailable on http://www.meanwell.com)
(asavailable on http://www.meanwell.com) 8. Please refer to suggest application (2)'(4) in page 3. 8. Please refer to suggest application (2)'(4) in page 3.
8. Please refer to suggest application (2)'(4) in page 3. File Name:PSC-100-SPEC2015-07-17 File Name:PSC-100-SPEC2015-07-17
File Name:PSC-100-SPEC2015-07-17

Datasheet - PDF

Title:Language:Size:Type:
pdf-Eingang: 90-264 AC / 127-370 DC, Ausgabe: 1, V1: 13,8, A1: 4 - MEANWELL - PSC-100A - PSC100AEnglish211 Kbytespdf-Eingang: 90-264 AC / 127-370 DC, Ausgabe: 1, V1: 13,8, A1: 4 - MEANWELL - PSC-100A - PSC100A

Bewertungen (0)

Es gibt keine Produktbewertungenvor.

Bewertung abgeben
Formular verstecken
Wertung:
Name:
E-Mail :
Betreff:
Text:
  Captcha
  Bewertung abgeben
Sie verwirrt?

Wenn Sie Fragen Kauf haben, können Sie die folgenden Links oder E-Mail

Bitte warten





* Pflichtfelder

oder