MPT-65A MPT65A MEANWELL Eingang: 90-264 AC / 127-370 DC, Ausgabe: 3, V1: 5, A1: 7, V2: 12, A2: 3,2, V3: -5, .. Vergrößern
Die Bilder sind nur orientativ. Bitte prüfen Sie das Artikelstammdatenblatt.

MPT-65A MPT65A MEANWELL Eingang: 90-264 AC / 127-370 DC, Ausgabe: 3, V1: 5, A1: 7, V2: 12, A2: 3,2, V3: -5, ..

MPT-65A

MPT65A

MEANWELL

Verfügbar

Schiff am heute

Eingang: 90-264 AC / 127-370 DC, Ausgabe: 3, V1: 5, A1: 7, V2: 12, A2: 3,2, V3: -5, A3: 0,7

Mehr Infos


Spannungsversorgungen

OPENFRAME MEDICAL

MPT

* Neues Produkt in der Originalverpackung mit allen Garantien und Zertifizierungen von MEANWELL

MengePreis
1+$32.28
9+$28.91
18+$28.19
27+$27.84
36+$27.62
*Dieser Preis ist pro Einheit und ist der Nettowert (ohne Steuern, falls zutreffend).

Wie es funktioniert

Wie funktioniert das?

1 Fügen Sie die Produkte Ihrer Wahl in den Warenkorb
2 Geben Sie Ihre Kontaktdaten und senden Sie Ihre Anfrage
3 Sie werden per E-Mail mit unseren Preisvorschläge mitzuteilen
4 Beenden Sie einfach Ihre Bestellung und Sie erhalten die Produkte

Es gibt verschiedene Möglichkeiten die Zahlung abzuwickeln
- Kreditkarte
- Banküberweisung
- PayPal


Verwandte Produkte

Mehr Infos



65W Tr iple Output Medical Type MP T -65series 65W Tr iple Output Medical Type MP T -65series
65W Tr iple Output Medical Type MP T -65series Features : Features :
Features : Universal AC input / Full range Universal AC input / Full range
Universal AC input / Full range Low leakage current<250A Low leakage current<250A
Low leakage current<250A Protections: Short circuit / Overload / Over voltage Protections: Short circuit / Overload / Over voltage
Protections: Short circuit / Overload / Over voltage Cooling by free air convection Cooling by free air convection
Cooling by free air convection Medical safetyapproved (2 x MOPP between primary to secondary) Medical safetyapproved (2 x MOPP between primary to secondary)
Medical safetyapproved (2 x MOPP between primary to secondary) 100% full load burn-in test 100% full load burn-in test
100% full load burn-in test Fixed switching frequency at 45KHz Fixed switching frequency at 45KHz
Fixed switching frequency at 45KHz 3 years warranty 3 years warranty
3 years warrantySPECIFICATION SPECIFICATION
SPECIFICATION MODEL MODEL
MODEL MPT-65A MPT-65B MPT-65C MPT-65A MPT-65B MPT-65C
MPT-65A MPT-65B MPT-65C OUTPUT NUMBER OUTPUT NUMBER
OUTPUT NUMBER CH1 CH1
CH1 CH2 CH2
CH2 CH3 CH3
CH3 CH1 CH1
CH1 CH2 CH2
CH2 CH3 CH3
CH3 CH1 CH1
CH1 CH2 CH2
CH2 CH3 CH3
CH3 DC VOLTAGE DC VOLTAGE
DC VOLTAGE 5V12V 5V12V
5V12V -5V5V -5V5V
-5V5V 12V 12V
12V -12V5V -12V5V
-12V5V 15V 15V
15V -15V -15V
-15V RATED CURRENT CURRENT RANGE RATED POWER RATED CURRENT CURRENT RANGE RATED POWER
RATED CURRENT CURRENT RANGE RATED POWER 5.5A2.5A0.5A5.5A2.5A0.5A5.5A2A0.5A 5.5A2.5A0.5A5.5A2.5A0.5A5.5A2A0.5A
5.5A2.5A0.5A5.5A2.5A0.5A5.5A2A0.5A 0.4 ~ 7A0.2 ~ 3.2A 0 ~ 0.7A0.4 ~ 7A0.2 ~ 3.2A 0 ~ 0.7A0.4 ~ 7A0.2 ~ 2.6A 0 ~ 0.7A 0.4 ~ 7A0.2 ~ 3.2A 0 ~ 0.7A0.4 ~ 7A0.2 ~ 3.2A 0 ~ 0.7A0.4 ~ 7A0.2 ~ 2.6A 0 ~ 0.7A
0.4 ~ 7A0.2 ~ 3.2A 0 ~ 0.7A0.4 ~ 7A0.2 ~ 3.2A 0 ~ 0.7A0.4 ~ 7A0.2 ~ 2.6A 0 ~ 0.7A 60W 63.5W65W 60W 63.5W65W
60W 63.5W65WOUTPUT OUTPUT
OUTPUT OUTPUT POWER (max.)72W with 18CFM min. Forced air convection OUTPUT POWER (max.)72W with 18CFM min. Forced air convection
OUTPUT POWER (max.)72W with 18CFM min. Forced air convection RIPPLE & NOISE (max.) Note.260mVp-p 120mVp-p 60mVp-p 60mVp-p 160mVp-p 100mVp-p 60mVp-p 180mVp-p 100mVp-p RIPPLE & NOISE (max.) Note.260mVp-p 120mVp-p 60mVp-p 60mVp-p 160mVp-p 100mVp-p 60mVp-p 180mVp-p 100mVp-p
RIPPLE & NOISE (max.) Note.260mVp-p 120mVp-p 60mVp-p 60mVp-p 160mVp-p 100mVp-p 60mVp-p 180mVp-p 100mVp-p VOLTAGE ADJ. RANGE VOLTAGE ADJ. RANGE
VOLTAGE ADJ. RANGE CH1:4.5 ~ 5.5V CH1:4.5 ~ 5.5V
CH1:4.5 ~ 5.5V VOLTAGE TOLERANCE Note.34.0% VOLTAGE TOLERANCE Note.34.0%
VOLTAGE TOLERANCE Note.34.0% +10,-7% +10,-7%
+10,-7% 5.0% 5.0%
5.0% 4.0% 4.0%
4.0% +10,-7% +10,-7%
+10,-7% 5.0% 5.0%
5.0% 4.0% 4.0%
4.0% +10,-7% +10,-7%
+10,-7% 5.0% 5.0%
5.0% LINE REGULATION LINE REGULATION
LINE REGULATION 1.0% 1.0%
1.0% 2.0%1.0% 2.0%1.0%
2.0%1.0% 1.0% 1.0%
1.0% 2.0% 2.0%
2.0% 1.0% 1.0%
1.0% 1.0% 1.0%
1.0% 2.0% 2.0%
2.0% 1.0% 1.0%
1.0% LOAD REGULATION LOAD REGULATION
LOAD REGULATION 3.0% 3.0%
3.0% 4.0% 4.0%
4.0% 1.0% 1.0%
1.0% 3.0% 3.0%
3.0% 4.0% 4.0%
4.0% 1.0% 1.0%
1.0% 3.0% 3.0%
3.0% 4.0% 4.0%
4.0% 1.0% 1.0%
1.0%INPUT INPUT
INPUTPROTECTION PROTECTION
PROTECTION ENVIRONMENT ENVIRONMENT
ENVIRONMENT SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY(Typ.) SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY(Typ.)
SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY(Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT Note.7 AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT Note.7
AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT Note.7OVERLOAD OVERLOAD
OVERLOADOVER VOLTAGE WORKING TEMP. OVER VOLTAGE WORKING TEMP.
OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT WORKING HUMIDITY STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT
WORKING HUMIDITY STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION VIBRATION
VIBRATION 800ms, 20ms/230VAC 800ms, 20ms/115VAC at full load 800ms, 20ms/230VAC 800ms, 20ms/115VAC at full load
800ms, 20ms/230VAC 800ms, 20ms/115VAC at full load 80ms/230VAC12ms/115VAC at full load 80ms/230VAC12ms/115VAC at full load
80ms/230VAC12ms/115VAC at full load 90 ~ 264VAC127 ~ 370VDC 90 ~ 264VAC127 ~ 370VDC
90 ~ 264VAC127 ~ 370VDC 47 ~ 440Hz 47 ~ 440Hz
47 ~ 440Hz 74%74%74% 74%74%74%
74%74%74% 1.6A/115VAC1A/230VAC 1.6A/115VAC1A/230VAC
1.6A/115VAC1A/230VAC COLD START 20A/115VAC 40A/230VAC COLD START 20A/115VAC 40A/230VAC
COLD START 20A/115VAC 40A/230VAC Earth leakage current < 250 A/264VAC , Touch current < 60 A/264VAC Earth leakage current < 250 A/264VAC , Touch current < 60 A/264VAC
Earth leakage current < 250 A/264VAC , Touch current < 60 A/264VAC 73 ~ 95W rated output power 73 ~ 95W rated output power
73 ~ 95W rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed Protection type : Hiccup mode, recovers automatically after fault condition is removed
Protection type : Hiccup mode, recovers automatically after fault condition is removed 5.75 ~ 6.75VDC on CH1 5.75 ~ 6.75VDC on CH1
5.75 ~ 6.75VDC on CH1 Protection type : Hiccup mode, recovers automatically after fault condition is removed Protection type : Hiccup mode, recovers automatically after fault condition is removed
Protection type : Hiccup mode, recovers automatically after fault condition is removed -10 ~ +55c (Refer to "Derating Curve") -10 ~ +55c (Refer to "Derating Curve")
-10 ~ +55c (Refer to "Derating Curve") 20 ~ 90% RH non-condensing 20 ~ 90% RH non-condensing
20 ~ 90% RH non-condensing -20 ~ +85c, 10 ~ 95% RH -20 ~ +85c, 10 ~ 95% RH
-20 ~ +85c, 10 ~ 95% RH 0.04%/c (0 ~ 50c) on +5V output 0.04%/c (0 ~ 50c) on +5V output
0.04%/c (0 ~ 50c) on +5V output 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes SAFETY & SAFETY &
SAFETY & SAFETY STANDARDSANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1 approved SAFETY STANDARDSANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1 approved
SAFETY STANDARDSANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1 approved ISOLATION LEVELPrimary-Secondary: 2xMOPP, Primary-Earth:1xMOPP ISOLATION LEVELPrimary-Secondary: 2xMOPP, Primary-Earth:1xMOPP
ISOLATION LEVELPrimary-Secondary: 2xMOPP, Primary-Earth:1xMOPP EMC EMC
EMC (Note 4) (Note 4)
(Note 4) OTHERS OTHERS
OTHERS WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION
WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY EMC IMMUNITY
EMC IMMUNITY MTBF DIMENSION MTBF DIMENSION
MTBF DIMENSION PACKING PACKING
PACKING I/P-O/P:4KVAC I/P-FG:2KVACO/P-FG:0.5KVAC 1min. I/P-O/P, I/P-FG:100M Ohms / 500VDC / 25c/ 70% RH Compliance to EN55011 (CISPR11) Class B, EN61000-3-2,-3 I/P-O/P:4KVAC I/P-FG:2KVACO/P-FG:0.5KVAC 1min. I/P-O/P, I/P-FG:100M Ohms / 500VDC / 25c/ 70% RH Compliance to EN55011 (CISPR11) Class B, EN61000-3-2,-3
I/P-O/P:4KVAC I/P-FG:2KVACO/P-FG:0.5KVAC 1min. I/P-O/P, I/P-FG:100M Ohms / 500VDC / 25c/ 70% RH Compliance to EN55011 (CISPR11) Class B, EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN60601-1-2, medical level, criteria A Compliance to EN61000-4-2,3,4,5,6,8,11, EN60601-1-2, medical level, criteria A
Compliance to EN61000-4-2,3,4,5,6,8,11, EN60601-1-2, medical level, criteria A 275.1Khrs min.MIL-HDBK-217F (25c) 275.1Khrs min.MIL-HDBK-217F (25c)
275.1Khrs min.MIL-HDBK-217F (25c) 127*76*42mm (L*W*H) 127*76*42mm (L*W*H)
127*76*42mm (L*W*H) 0.27Kg; 54pcs/16.8Kg/1.35CUFT 0.27Kg; 54pcs/16.8Kg/1.35CUFT
0.27Kg; 54pcs/16.8Kg/1.35CUFTNOTE NOTE
NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, ratedload and 25c of ambient temperature. 1. All parameters NOT specially mentioned are measured at 230VAC input, ratedload and 25c of ambient temperature.
1. All parameters NOT specially mentioned are measured at 230VAC input, ratedload and 25c of ambient temperature. 2. Ripple & noiseare measured at 20MHz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 2. Ripple & noiseare measured at 20MHz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
2. Ripple & noiseare measured at 20MHz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 3. Tolerance : includes set up tolerance, line regulation and load regulation.
3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to performthese EMC tests, please refer to "EMI testingof component powersupplies." EMC directives. For guidance on how to performthese EMC tests, please refer to "EMI testingof component powersupplies."
EMC directives. For guidance on how to performthese EMC tests, please refer to "EMI testingof component powersupplies." (asavailable on http://www.meanwell.com) (asavailable on http://www.meanwell.com)
(asavailable on http://www.meanwell.com) 5. Mounting holesM1 and M2 should be grounded for EMI purposes. 5. Mounting holesM1 and M2 should be grounded for EMI purposes.
5. Mounting holesM1 and M2 should be grounded for EMI purposes. 6. HeatSink HS1,HS2 can not be shorted. 6. HeatSink HS1,HS2 can not be shorted.
6. HeatSink HS1,HS2 can not be shorted. 7. Touchcurrentwas measured from primary input to DC output. 7. Touchcurrentwas measured from primary input to DC output.
7. Touchcurrentwas measured from primary input to DC output.File Name:MPT-65-SPEC2015-07-17 File Name:MPT-65-SPEC2015-07-17
File Name:MPT-65-SPEC2015-07-17

Datasheet - PDF

Title:Language:Size:Type:
pdf-Eingang: 90-264 AC / 127-370 DC, Ausgabe: 3, V1: 5, A1: 7, V2: 12, A2: 3,2, V3: -5, - MEANWELL - MPT-65A -English143 Kbytespdf-Eingang: 90-264 AC / 127-370 DC, Ausgabe: 3, V1: 5, A1: 7, V2: 12, A2: 3,2, V3: -5, - MEANWELL - MPT-65A -

Bewertungen (0)

Es gibt keine Produktbewertungenvor.

Bewertung abgeben
Formular verstecken
Wertung:
Name:
E-Mail :
Betreff:
Text:
  Captcha
  Bewertung abgeben
Sie verwirrt?

Wenn Sie Fragen Kauf haben, können Sie die folgenden Links oder E-Mail

Bitte warten





* Pflichtfelder

oder