LPV-35-24 LPV3524 MEANWELL Eingang: 90-264 AC / 127-370 DC, Ausgabe: 1, V1: 24, A1: 1,5 Vergrößern
Die Bilder sind nur orientativ. Bitte prüfen Sie das Artikelstammdatenblatt.

LPV-35-24 LPV3524 MEANWELL Eingang: 90-264 AC / 127-370 DC, Ausgabe: 1, V1: 24, A1: 1,5

LPV-35-24

LPV3524

MEANWELL

Verfügbar

Schiff am heute

Eingang: 90-264 AC / 127-370 DC, Ausgabe: 1, V1: 24, A1: 1,5

Mehr Infos


Spannungsversorgungen

LED-Treiber

LPV

* Neues Produkt in der Originalverpackung mit allen Garantien und Zertifizierungen von MEANWELL

MengePreis
1+$18.81
15+$16.85
30+$16.43
45+$16.23
60+$16.09
*Dieser Preis ist pro Einheit und ist der Nettowert (ohne Steuern, falls zutreffend).

Wie es funktioniert

Wie funktioniert das?

1 Fügen Sie die Produkte Ihrer Wahl in den Warenkorb
2 Geben Sie Ihre Kontaktdaten und senden Sie Ihre Anfrage
3 Sie werden per E-Mail mit unseren Preisvorschläge mitzuteilen
4 Beenden Sie einfach Ihre Bestellung und Sie erhalten die Produkte

Es gibt verschiedene Möglichkeiten die Zahlung abzuwickeln
- Kreditkarte
- Banküberweisung
- PayPal


Verwandte Produkte

Mehr Infos



35W Single Output Switching Power Supply 35W Single Output Switching Power Supply
35W Single Output Switching Power Supply LP V -35series LP V -35series
LP V -35series Features : Features :
Features : Constant voltagedesign Constant voltagedesign
Constant voltagedesign UniversalAC input / Full range UniversalAC input / Full range
UniversalAC input / Full range Withstand 300VAC surge input for 5 seconds Withstand 300VAC surge input for 5 seconds
Withstand 300VAC surge input for 5 seconds Protections: Short circuit / Overload / Over voltage Protections: Short circuit / Overload / Over voltage
Protections: Short circuit / Overload / Over voltage Cooling by free air convection Cooling by free air convection
Cooling by free air convection Fully encapsulated with IP67 level (Note.s) Fully encapsulated with IP67 level (Note.s)
Fully encapsulated with IP67 level (Note.s) Fully isolated plastic case Fully isolated plastic case
Fully isolated plastic case Classpower unit, no FG Classpower unit, no FG
Classpower unit, no FG Class 2 power unit Class 2 power unit
Class 2 power unit Pass LPS Pass LPS
Pass LPS Suitable for LED lighting and moving sign applications (Note.8) Suitable for LED lighting and moving sign applications (Note.8)
Suitable for LED lighting and moving sign applications (Note.8) 100% full load burn-in test 100% full load burn-in test
100% full load burn-in test Low cost,high reliability Low cost,high reliability
Low cost,high reliability 2 years warranty 2 years warranty
2 years warrantySPECIFICATION SPECIFICATION
SPECIFICATION F110 F110
F110 LPS LPS
LPS IP67 IP67
IP67 MODEL LPV-35-5LPV-35-12LPV-35-15LPV-35-24 LPV-35-36 MODEL LPV-35-5LPV-35-12LPV-35-15LPV-35-24 LPV-35-36
MODEL LPV-35-5LPV-35-12LPV-35-15LPV-35-24 LPV-35-36 DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER
DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER 5V 12V 15V 24V 36V 5V 12V 15V 24V 36V
5V 12V 15V 24V 36V 5A 3A 2.4A1.5A1A 5A 3A 2.4A1.5A1A
5A 3A 2.4A1.5A1A 0 ~ 6A (Note.7)0 ~ 3A 0 ~ 2.4A0 ~ 1.5A0 ~ 1A 0 ~ 6A (Note.7)0 ~ 3A 0 ~ 2.4A0 ~ 1.5A0 ~ 1A
0 ~ 6A (Note.7)0 ~ 3A 0 ~ 2.4A0 ~ 1.5A0 ~ 1A 30W36W36W36W36W 30W36W36W36W36W
30W36W36W36W36W RIPPLE & NOISE (max.) Note.2 80mVp-p120mVp-p RIPPLE & NOISE (max.) Note.2 80mVp-p120mVp-p
RIPPLE & NOISE (max.) Note.2 80mVp-p120mVp-p 120mVp-p150mVp-p150mVp-p 120mVp-p150mVp-p150mVp-p
120mVp-p150mVp-p150mVp-p OUTPUT OUTPUT
OUTPUT VOLTAGE TOLERANCE Note.36.0% VOLTAGE TOLERANCE Note.36.0%
VOLTAGE TOLERANCE Note.36.0% 5.0% 5.0%
5.0% LINE REGULATION LOAD REGULATION LINE REGULATION LOAD REGULATION
LINE REGULATION LOAD REGULATION 1.0% 1.0%
1.0% 4.0% 4.0%
4.0%2.0% 2.0%
2.0% SETUP, RISE TIME Note.6500ms, 20ms / 230VAC500ms, 20ms / 115VAC at full load SETUP, RISE TIME Note.6500ms, 20ms / 230VAC500ms, 20ms / 115VAC at full load
SETUP, RISE TIME Note.6500ms, 20ms / 230VAC500ms, 20ms / 115VAC at full load HOLD UP TIME (Typ.) HOLD UP TIME (Typ.)
HOLD UP TIME (Typ.) 50ms/230VAC16ms/115VAC at full load 50ms/230VAC16ms/115VAC at full load
50ms/230VAC16ms/115VAC at full load VOLTAGE RANGE Note.4 90 ~ 264VAC127 ~ 370VDC VOLTAGE RANGE Note.4 90 ~ 264VAC127 ~ 370VDC
VOLTAGE RANGE Note.4 90 ~ 264VAC127 ~ 370VDC INPUT INPUT
INPUT FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT (Typ.) FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT (Typ.)
FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT (Typ.) 47 ~ 63Hz 47 ~ 63Hz
47 ~ 63Hz 77%84% 77%84%
77%84% 1.1A/115VAC 0.7A/230VAC 1.1A/115VAC 0.7A/230VAC
1.1A/115VAC 0.7A/230VAC84%85%85% 84%85%85%
84%85%85% INRUSH CURRENT(Typ.) INRUSH CURRENT(Typ.)
INRUSH CURRENT(Typ.) MAX. No. of PSUs on 16A MAX. No. of PSUs on 16A
MAX. No. of PSUs on 16A COLD START 55A(twidth=510s measured at 50% Ipeak) at 230VAC COLD START 55A(twidth=510s measured at 50% Ipeak) at 230VAC
COLD START 55A(twidth=510s measured at 50% Ipeak) at 230VAC CIRCUIT BREAKER4 units (circuit breaker of type B) / 7 units(circuit breaker of type C) at 230VAC CIRCUIT BREAKER4 units (circuit breaker of type B) / 7 units(circuit breaker of type C) at 230VAC
CIRCUIT BREAKER4 units (circuit breaker of type B) / 7 units(circuit breaker of type C) at 230VACPROTECTION PROTECTION
PROTECTION ENVIRONMENT ENVIRONMENT
ENVIRONMENT SAFETY & EMC SAFETY & EMC
SAFETY & EMCOTHERS OTHERS
OTHERS LEAKAGE CURRENT OVERLOAD LEAKAGE CURRENT OVERLOAD
LEAKAGE CURRENT OVERLOAD OVER VOLTAGE WORKING TEMP. OVER VOLTAGE WORKING TEMP.
OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION WORKING HUMIDITY STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION
WORKING HUMIDITY STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION SAFETY STANDARDS WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION
SAFETY STANDARDS WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY EMC IMMUNITY
EMC IMMUNITY MTBF DIMENSION PACKING MTBF DIMENSION PACKING
MTBF DIMENSION PACKING 0.25mA / 240VAC 0.25mA / 240VAC
0.25mA / 240VAC 110 ~ 150% rated output power 110 ~ 150% rated output power
110 ~ 150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed Protection type : Hiccup mode, recovers automatically after fault condition is removed
Protection type : Hiccup mode, recovers automatically after fault condition is removed 5.75 ~ 6.75V13.8 ~ 16.2V17.25 ~ 20.25V27.6 ~ 32.4V41.4 ~ 48.6V Protection type : Shut down o/p voltage, re-power on to recover 5.75 ~ 6.75V13.8 ~ 16.2V17.25 ~ 20.25V27.6 ~ 32.4V41.4 ~ 48.6V Protection type : Shut down o/p voltage, re-power on to recover
5.75 ~ 6.75V13.8 ~ 16.2V17.25 ~ 20.25V27.6 ~ 32.4V41.4 ~ 48.6V Protection type : Shut down o/p voltage, re-power on to recover -30 ~ +65 (Refer to "Derating Curve") -30 ~ +65 (Refer to "Derating Curve")
-30 ~ +65 (Refer to "Derating Curve") 20 ~ 90% RH non-condensing 20 ~ 90% RH non-condensing
20 ~ 90% RH non-condensing -40 ~ +80, 10 ~ 95% RH -40 ~ +80, 10 ~ 95% RH
-40 ~ +80, 10 ~ 95% RH 0.03%/ (0 ~ 50) 0.03%/ (0 ~ 50)
0.03%/ (0 ~ 50) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL1310 class 2, CAN/CSA No. 223-M91, CB IEC61347-1,IEC61347-2-13,IP67 approved ; design refer to TUV EN60950-1 UL1310 class 2, CAN/CSA No. 223-M91, CB IEC61347-1,IEC61347-2-13,IP67 approved ; design refer to TUV EN60950-1
UL1310 class 2, CAN/CSA No. 223-M91, CB IEC61347-1,IEC61347-2-13,IP67 approved ; design refer to TUV EN60950-1 I/P-O/P:3KVAC I/P-O/P:3KVAC
I/P-O/P:3KVAC I/P-O/P:>100M Ohms / 500VDC / 25/ 70% RH I/P-O/P:>100M Ohms / 500VDC / 25/ 70% RH
I/P-O/P:>100M Ohms / 500VDC / 25/ 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2 Class A, EN61000-3-3 Compliance to EN55022 (CISPR22) Class B, EN61000-3-2 Class A, EN61000-3-3
Compliance to EN55022 (CISPR22) Class B, EN61000-3-2 Class A, EN61000-3-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level,criteria A Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level,criteria A
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level,criteria A 743.5Khrs min.MIL-HDBK-217F (25) 743.5Khrs min.MIL-HDBK-217F (25)
743.5Khrs min.MIL-HDBK-217F (25) 148*40*30mm (L*W*H) 148*40*30mm (L*W*H)
148*40*30mm (L*W*H) 0.34Kg; 40pcs/14.6Kg/0.63CUFT 0.34Kg; 40pcs/14.6Kg/0.63CUFT
0.34Kg; 40pcs/14.6Kg/0.63CUFTNOTE NOTE
NOTE 1. All parameters NOT speciallymentioned are measured at 230VAC input, ratedload and 25 of ambient temperature. 1. All parameters NOT speciallymentioned are measured at 230VAC input, ratedload and 25 of ambient temperature.
1. All parameters NOT speciallymentioned are measured at 230VAC input, ratedload and 25 of ambient temperature. 2. Ripple & noiseare measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 2. Ripple & noiseare measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
2. Ripple & noiseare measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes setup tolerance, line regulation and load regulation. 3. Tolerance : includes setup tolerance, line regulation and load regulation.
3. Tolerance : includes setup tolerance, line regulation and load regulation. 4. Deratingmay be needed underlow input voltage.Please checkthe static characteristics for more details. 4. Deratingmay be needed underlow input voltage.Please checkthe static characteristics for more details.
4. Deratingmay be needed underlow input voltage.Please checkthe static characteristics for more details. 5. The powersupply is considered as a component that will be operated in combination with final equipment. SinceEMC performance will be affected by the complete installation,the final equipment manufacturers must re-qualify EMC Directive on the complete installationagain. 5. The powersupply is considered as a component that will be operated in combination with final equipment. SinceEMC performance will be affected by the complete installation,the final equipment manufacturers must re-qualify EMC Directive on the complete installationagain.
5. The powersupply is considered as a component that will be operated in combination with final equipment. SinceEMC performance will be affected by the complete installation,the final equipment manufacturers must re-qualify EMC Directive on the complete installationagain. 6. Lengthof setup time is measured at first cold start.Turning ON/OFF the powersupply may lead to increase of the setup time. 6. Lengthof setup time is measured at first cold start.Turning ON/OFF the powersupply may lead to increase of the setup time.
6. Lengthof setup time is measured at first cold start.Turning ON/OFF the powersupply may lead to increase of the setup time. 7. LPV-35-5 canprovide 6A of output currentcontinuously. Based on the requirement of UL1310 class 2, the output currentis only certified up to 5A for the testreport of LPV-35-5. 7. LPV-35-5 canprovide 6A of output currentcontinuously. Based on the requirement of UL1310 class 2, the output currentis only certified up to 5A for the testreport of LPV-35-5.
7. LPV-35-5 canprovide 6A of output currentcontinuously. Based on the requirement of UL1310 class 2, the output currentis only certified up to 5A for the testreport of LPV-35-5. 8. The unit might not be suitable for lighting applications in EU countries. Please checkwith your local authorities for the possible useof the unit. s. Suitable for indoor useor outdoorusewithout direct sunlightexposure. Please avoid immerse in the waterover 30 minute. 8. The unit might not be suitable for lighting applications in EU countries. Please checkwith your local authorities for the possible useof the unit. s. Suitable for indoor useor outdoorusewithout direct sunlightexposure. Please avoid immerse in the waterover 30 minute.
8. The unit might not be suitable for lighting applications in EU countries. Please checkwith your local authorities for the possible useof the unit. s. Suitable for indoor useor outdoorusewithout direct sunlightexposure. Please avoid immerse in the waterover 30 minute.File Name:LPV-35-SPEC2015-05-28 File Name:LPV-35-SPEC2015-05-28
File Name:LPV-35-SPEC2015-05-28

Datasheet - PDF

Title:Language:Size:Type:
pdf-Eingang: 90-264 AC / 127-370 DC, Ausgabe: 1, V1: 24, A1: 1,5 - MEANWELL - LPV-35-24 - LPV3524English110 Kbytespdf-Eingang: 90-264 AC / 127-370 DC, Ausgabe: 1, V1: 24, A1: 1,5 - MEANWELL - LPV-35-24 - LPV3524

Bewertungen (0)

Es gibt keine Produktbewertungenvor.

Bewertung abgeben
Formular verstecken
Wertung:
Name:
E-Mail :
Betreff:
Text:
  Captcha
  Bewertung abgeben
Sie verwirrt?

Wenn Sie Fragen Kauf haben, können Sie die folgenden Links oder E-Mail

Bitte warten





* Pflichtfelder

oder