LPF-16D-12 LPF16D12 MEANWELL Eingang: 90-305 AC / 127-431 DC, Ausgabe: 1, V1: 12, A1: 1,34 Vergrößern
Die Bilder sind nur orientativ. Bitte prüfen Sie das Artikelstammdatenblatt.

LPF-16D-12 LPF16D12 MEANWELL Eingang: 90-305 AC / 127-431 DC, Ausgabe: 1, V1: 12, A1: 1,34

LPF-16D-12

LPF16D12

MEANWELL

Verfügbar

Schiff am heute

Eingang: 90-305 AC / 127-431 DC, Ausgabe: 1, V1: 12, A1: 1,34

Mehr Infos


Spannungsversorgungen

LED-Treiber

LPF

* Neues Produkt in der Originalverpackung mit allen Garantien und Zertifizierungen von MEANWELL

MengePreis
1+$30.68
10+$27.41
19+$26.79
28+$26.47
38+$26.25
*Dieser Preis ist pro Einheit und ist der Nettowert (ohne Steuern, falls zutreffend).

Wie es funktioniert

Wie funktioniert das?

1 Fügen Sie die Produkte Ihrer Wahl in den Warenkorb
2 Geben Sie Ihre Kontaktdaten und senden Sie Ihre Anfrage
3 Sie werden per E-Mail mit unseren Preisvorschläge mitzuteilen
4 Beenden Sie einfach Ihre Bestellung und Sie erhalten die Produkte

Es gibt verschiedene Möglichkeiten die Zahlung abzuwickeln
- Kreditkarte
- Banküberweisung
- PayPal


Verwandte Produkte

Mehr Infos



16W Single Output Switching Power Supply 16W Single Output Switching Power Supply
16W Single Output Switching Power Supply LPF-16series LPF-16series
LPF-16series Features : Features :
Features : UniversalAC input / Full range (up to 305VAC) UniversalAC input / Full range (up to 305VAC)
UniversalAC input / Full range (up to 305VAC) Protections: Short circuit / Over current/ Over voltage/ Over temperature Protections: Short circuit / Over current/ Over voltage/ Over temperature
Protections: Short circuit / Over current/ Over voltage/ Over temperature Built-in active PFC function Built-in active PFC function
Built-in active PFC function Cooling by free air convection Cooling by free air convection
Cooling by free air convection Fully isolated plastic case with IP30 level (Note.8) Fully isolated plastic case with IP30 level (Note.8)
Fully isolated plastic case with IP30 level (Note.8) Classpower unit, no FG Classpower unit, no FG
Classpower unit, no FG Class 2 power unit Class 2 power unit
Class 2 power unit IP67(optional , model NO. : LPF-16-12 P) IP67(optional , model NO. : LPF-16-12 P)
IP67(optional , model NO. : LPF-16-12 P) Suitable for LED lighting and moving sign applications Suitable for LED lighting and moving sign applications
Suitable for LED lighting and moving sign applications Compliance to worldwide safetyregulations for lighting Compliance to worldwide safetyregulations for lighting
Compliance to worldwide safetyregulations for lighting Suitable for dry / damplocations(wet locationfor LPF-16-12 P) Suitable for dry / damplocations(wet locationfor LPF-16-12 P)
Suitable for dry / damplocations(wet locationfor LPF-16-12 P) 5 years warranty 5 years warranty
5 years warranty SPECIFICATION SPECIFICATION
SPECIFICATION F110 F110
F110 MM SELVIP30 MM SELVIP30
MM SELVIP30 MODEL MODEL
MODEL LPF-16-12LPF-16-15LPF-16-20LPF-16-24LPF-16-30LPF-16-36LPF-16-42LPF-16-48LPF-16-54 LPF-16-12LPF-16-15LPF-16-20LPF-16-24LPF-16-30LPF-16-36LPF-16-42LPF-16-48LPF-16-54
LPF-16-12LPF-16-15LPF-16-20LPF-16-24LPF-16-30LPF-16-36LPF-16-42LPF-16-48LPF-16-54 DC VOLTAGE DC VOLTAGE
DC VOLTAGE 12V 12V
12V 15V 15V
15V 20V 20V
20V 24V 24V
24V 30V 30V
30V 36V 36V
36V 42V 42V
42V 48V 48V
48V 54V 54V
54V CONSTANT CURRENT REGION Note.4 6.6 ~12V CONSTANT CURRENT REGION Note.4 6.6 ~12V
CONSTANT CURRENT REGION Note.4 6.6 ~12V 8.25 ~ 15V 8.25 ~ 15V
8.25 ~ 15V 11 ~ 20V 11 ~ 20V
11 ~ 20V 13.2 ~ 24V 13.2 ~ 24V
13.2 ~ 24V 16.5 ~ 30V 16.5 ~ 30V
16.5 ~ 30V 19.8 ~ 36V 19.8 ~ 36V
19.8 ~ 36V 23.1 ~ 42V 23.1 ~ 42V
23.1 ~ 42V 26.4 ~ 48V 26.4 ~ 48V
26.4 ~ 48V 29.7 ~ 54V 29.7 ~ 54V
29.7 ~ 54V RATED CURRENT RATED POWER RATED CURRENT RATED POWER
RATED CURRENT RATED POWER 1.34A1.07A0.8A0.67A0.54A0.45A 1.34A1.07A0.8A0.67A0.54A0.45A
1.34A1.07A0.8A0.67A0.54A0.45A 16.08W 16.05W 16W16.08W 16.2W 16.2W 16.08W 16.05W 16W16.08W 16.2W 16.2W
16.08W 16.05W 16W16.08W 16.2W 16.2W 0.39A 0.39A
0.39A 16.38W 16.38W
16.38W 0.34A 0.34A
0.34A 16.32W 16.32W
16.32W 0.3A 0.3A
0.3A 16.2W 16.2W
16.2WOUTPUT OUTPUT
OUTPUT RIPPLE & NOISE (max.) Note.2150mVp-p 150mVp-p 150mVp-p 150mVp-p 200mVp-p 250mVp-p RIPPLE & NOISE (max.) Note.2150mVp-p 150mVp-p 150mVp-p 150mVp-p 200mVp-p 250mVp-p
RIPPLE & NOISE (max.) Note.2150mVp-p 150mVp-p 150mVp-p 150mVp-p 200mVp-p 250mVp-p VOLTAGE TOLERANCE Note.34.0% 4.0% 4.0% 4.0% 4.0% 4.0% VOLTAGE TOLERANCE Note.34.0% 4.0% 4.0% 4.0% 4.0% 4.0%
VOLTAGE TOLERANCE Note.34.0% 4.0% 4.0% 4.0% 4.0% 4.0% 250mVp-p 250mVp-p
250mVp-p 4.0% 4.0%
4.0% 250mVp-p 250mVp-p
250mVp-p 4.0% 4.0%
4.0% 350mVp-p 350mVp-p
350mVp-p 4.0% 4.0%
4.0% LINE REGULATION LOAD REGULATION LINE REGULATION LOAD REGULATION
LINE REGULATION LOAD REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5%
0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 2.0% 1.5% 1.0% 0.5% 0.5% 0.5% 2.0% 1.5% 1.0% 0.5% 0.5% 0.5%
2.0% 1.5% 1.0% 0.5% 0.5% 0.5% 0.5% 0.5%
0.5% 0.5% 0.5%
0.5% 0.5% 0.5%
0.5% 0.5% 0.5%
0.5% 0.5% 0.5%
0.5% 0.5% 0.5%
0.5% SETUP, RISE TIME Note.61500ms, 80ms / 115VAC at full load 500ms, 80ms / 230VAC SETUP, RISE TIME Note.61500ms, 80ms / 115VAC at full load 500ms, 80ms / 230VAC
SETUP, RISE TIME Note.61500ms, 80ms / 115VAC at full load 500ms, 80ms / 230VAC HOLD UP TIME (Typ.) HOLD UP TIME (Typ.)
HOLD UP TIME (Typ.) 16ms at full load 230VAC /115VAC 16ms at full load 230VAC /115VAC
16ms at full load 230VAC /115VAC VOLTAGE RANGE Note.5 90 ~ 305VAC127 ~ 431VDC VOLTAGE RANGE Note.5 90 ~ 305VAC127 ~ 431VDC
VOLTAGE RANGE Note.5 90 ~ 305VAC127 ~ 431VDC FREQUENCY RANGE POWER FACTOR (Typ.) FREQUENCY RANGE POWER FACTOR (Typ.)
FREQUENCY RANGE POWER FACTOR (Typ.) TOTAL HARMONIC DISTORTION TOTAL HARMONIC DISTORTION
TOTAL HARMONIC DISTORTION 47 ~ 63Hz 47 ~ 63Hz
47 ~ 63Hz PF>0.97/115VAC, PF>0.95/230VAC, PF>0.92/277VAC at full load (Please refer to "Power Factor Characteristic" curve) THD< 20% when output loading60% at 115VAC/230VAC input and output loading75% at 277VAC input PF>0.97/115VAC, PF>0.95/230VAC, PF>0.92/277VAC at full load (Please refer to "Power Factor Characteristic" curve) THD< 20% when output loading60% at 115VAC/230VAC input and output loading75% at 277VAC input
PF>0.97/115VAC, PF>0.95/230VAC, PF>0.92/277VAC at full load (Please refer to "Power Factor Characteristic" curve) THD< 20% when output loading60% at 115VAC/230VAC input and output loading75% at 277VAC input INPUT INPUT
INPUT EFFICIENCY (Typ.) AC CURRENT EFFICIENCY (Typ.) AC CURRENT
EFFICIENCY (Typ.) AC CURRENT INRUSH CURRENT (Typ.) INRUSH CURRENT (Typ.)
INRUSH CURRENT (Typ.) MAX. No. of PSUs on 16A CIRCUIT BREAKER MAX. No. of PSUs on 16A CIRCUIT BREAKER
MAX. No. of PSUs on 16A CIRCUIT BREAKER LEAKAGE CURRENT LEAKAGE CURRENT
LEAKAGE CURRENT 84% 84% 86% 86% 86% 86% 84% 84% 86% 86% 86% 86%
84% 84% 86% 86% 86% 86% 0.4A / 115VAC0.25A / 230VAC0.2A/277VAC 0.4A / 115VAC0.25A / 230VAC0.2A/277VAC
0.4A / 115VAC0.25A / 230VAC0.2A/277VAC COLD START 45A(twidth=200s measured at 50% Ipeak) at 230VAC COLD START 45A(twidth=200s measured at 50% Ipeak) at 230VAC
COLD START 45A(twidth=200s measured at 50% Ipeak) at 230VAC14 units (circuit breaker of type B) / 24 units (circuit breaker of type C) at 230VAC 14 units (circuit breaker of type B) / 24 units (circuit breaker of type C) at 230VAC
14 units (circuit breaker of type B) / 24 units (circuit breaker of type C) at 230VAC<0.75mA / 240VAC <0.75mA / 240VAC
<0.75mA / 240VAC 86% 86%
86% 86% 86%
86% 86% 86%
86%PROTECTION PROTECTION
PROTECTION OVER CURRENTNote.4 95 ~ 108% OVER CURRENTNote.4 95 ~ 108%
OVER CURRENTNote.4 95 ~ 108% Protection type : Constant current limiting, recovers automatically after fault condition is removed Protection type : Constant current limiting, recovers automatically after fault condition is removed
Protection type : Constant current limiting, recovers automatically after fault condition is removed SHORT CIRCUITHiccup mode, recovers automatically after fault condition is removed. SHORT CIRCUITHiccup mode, recovers automatically after fault condition is removed.
SHORT CIRCUITHiccup mode, recovers automatically after fault condition is removed.OVER VOLTAGE OVER VOLTAGE
OVER VOLTAGE 15 ~ 18V 17.5 ~ 21V23 ~ 27V 28 ~ 35V 34 ~ 40V 41 ~ 49V 15 ~ 18V 17.5 ~ 21V23 ~ 27V 28 ~ 35V 34 ~ 40V 41 ~ 49V
15 ~ 18V 17.5 ~ 21V23 ~ 27V 28 ~ 35V 34 ~ 40V 41 ~ 49V Protection type : Shut down and latch off o/p voltage, re-power on to recover Protection type : Shut down and latch off o/p voltage, re-power on to recover
Protection type : Shut down and latch off o/p voltage, re-power on to recover 46 ~ 54V 46 ~ 54V
46 ~ 54V 54 ~ 63V 54 ~ 63V
54 ~ 63V 59 ~ 66V 59 ~ 66V
59 ~ 66V OVER TEMPERATURE Shut down o/p voltage, recovers automatically after temperature goes down OVER TEMPERATURE Shut down o/p voltage, recovers automatically after temperature goes down
OVER TEMPERATURE Shut down o/p voltage, recovers automatically after temperature goes downENVIRONMENT ENVIRONMENT
ENVIRONMENT WORKING TEMP. WORKING HUMIDITY STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION WORKING TEMP. WORKING HUMIDITY STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION
WORKING TEMP. WORKING HUMIDITY STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATIONSAFETY STANDARDS SAFETY STANDARDS
SAFETY STANDARDS -35 ~ +70 (Refer to "Derating Curve") -35 ~ +70 (Refer to "Derating Curve")
-35 ~ +70 (Refer to "Derating Curve") 20 ~ 95% RH non-condensing 20 ~ 95% RH non-condensing
20 ~ 95% RH non-condensing -40 ~ +80C, 10 ~ 95% RH -40 ~ +80C, 10 ~ 95% RH
-40 ~ +80C, 10 ~ 95% RH 0.03%/C (0 ~ 50C) 0.03%/C (0 ~ 50C)
0.03%/C (0 ~ 50C) 10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes 10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes
10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes UL8750, CSA C22.2 No. 250.0-08,EN61347-1, EN61347-2-13 independent,EN62384,J61347-1, J61347-2-13 approved,IP67 (optional) ; Design refer to UL60950-1, TUV EN60950-1 UL8750, CSA C22.2 No. 250.0-08,EN61347-1, EN61347-2-13 independent,EN62384,J61347-1, J61347-2-13 approved,IP67 (optional) ; Design refer to UL60950-1, TUV EN60950-1
UL8750, CSA C22.2 No. 250.0-08,EN61347-1, EN61347-2-13 independent,EN62384,J61347-1, J61347-2-13 approved,IP67 (optional) ; Design refer to UL60950-1, TUV EN60950-1 SAFETY & SAFETY &
SAFETY & WITHSTAND VOLTAGEI/P-O/P:3.75KVAC WITHSTAND VOLTAGEI/P-O/P:3.75KVAC
WITHSTAND VOLTAGEI/P-O/P:3.75KVAC EMC EMC
EMC OTHERS OTHERS
OTHERS ISOLATION RESISTANCE EMC EMISSION ISOLATION RESISTANCE EMC EMISSION
ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF DIMENSION EMC IMMUNITY MTBF DIMENSION
EMC IMMUNITY MTBF DIMENSION PACKING PACKING
PACKING I/P-O/P:100M Ohms / 500VDC / 25C/ 70% RH I/P-O/P:100M Ohms / 500VDC / 25C/ 70% RH
I/P-O/P:100M Ohms / 500VDC / 25C/ 70% RH Compliance to EN55015; EN61000-3-2 Class C (50% load) ; EN61000-3-3 Compliance to EN55015; EN61000-3-2 Class C (50% load) ; EN61000-3-3
Compliance to EN55015; EN61000-3-2 Class C (50% load) ; EN61000-3-3 Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547,light industry level(surge 2KV),criteria A Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547,light industry level(surge 2KV),criteria A
Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547,light industry level(surge 2KV),criteria A 473.3Khrs min.MIL-HDBK-217F (25C) 473.3Khrs min.MIL-HDBK-217F (25C)
473.3Khrs min.MIL-HDBK-217F (25C) 148*40*32mm (L*W*H) 148*40*32mm (L*W*H)
148*40*32mm (L*W*H) 0.21Kg; 40pcs/9.4Kg/1.02CUFT 0.21Kg; 40pcs/9.4Kg/1.02CUFT
0.21Kg; 40pcs/9.4Kg/1.02CUFT NOTE NOTE
NOTE 1. All parameters NOT speciallymentioned are measured at 230VAC input, ratedload and 25C of ambient temperature. 1. All parameters NOT speciallymentioned are measured at 230VAC input, ratedload and 25C of ambient temperature.
1. All parameters NOT speciallymentioned are measured at 230VAC input, ratedload and 25C of ambient temperature. 2. Ripple & noiseare measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 2. Ripple & noiseare measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
2. Ripple & noiseare measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes setup tolerance, line regulation and load regulation. 3. Tolerance : includes setup tolerance, line regulation and load regulation.
3. Tolerance : includes setup tolerance, line regulation and load regulation. 4. Constant currentoperation region is within 50% .100% ratedoutput voltage.This is the suitable operation region for LED related applications, but please reconfirm special electricalrequirements for some specific system design. 4. Constant currentoperation region is within 50% .100% ratedoutput voltage.This is the suitable operation region for LED related applications, but please reconfirm special electricalrequirements for some specific system design.
4. Constant currentoperation region is within 50% .100% ratedoutput voltage.This is the suitable operation region for LED related applications, but please reconfirm special electricalrequirements for some specific system design. 5. Deratingmay be needed underlow input voltages. Please checkthe static characteristics for more details. 5. Deratingmay be needed underlow input voltages. Please checkthe static characteristics for more details.
5. Deratingmay be needed underlow input voltages. Please checkthe static characteristics for more details. 6. Lengthof setup time is measured at cold first start.Turning ON/OFF the powersupply may lead to increase of the setup time. 6. Lengthof setup time is measured at cold first start.Turning ON/OFF the powersupply may lead to increase of the setup time.
6. Lengthof setup time is measured at cold first start.Turning ON/OFF the powersupply may lead to increase of the setup time. 7. The powersupply is considered as a component that will be operated in combination with final equipment. SinceEMC performance will be affected by the complete installation,the final equipment manufacturers must re-qualify EMC Directive on the complete installationagain. 7. The powersupply is considered as a component that will be operated in combination with final equipment. SinceEMC performance will be affected by the complete installation,the final equipment manufacturers must re-qualify EMC Directive on the complete installationagain.
7. The powersupply is considered as a component that will be operated in combination with final equipment. SinceEMC performance will be affected by the complete installation,the final equipment manufacturers must re-qualify EMC Directive on the complete installationagain. 8. Suitable for indoor use. 8. Suitable for indoor use.
8. Suitable for indoor use. 9.To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently 9.To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently
9.To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently connected to the mains. connected to the mains.
connected to the mains.File Name:LPF-16-SPEC2015-05-28 File Name:LPF-16-SPEC2015-05-28
File Name:LPF-16-SPEC2015-05-28

Datasheet - PDF

Title:Language:Size:Type:
pdf-Eingang: 90-305 AC / 127-431 DC, Ausgabe: 1, V1: 12, A1: 1,34 - MEANWELL - LPF-16D-12 - LPF16D12English147 Kbytespdf-Eingang: 90-305 AC / 127-431 DC, Ausgabe: 1, V1: 12, A1: 1,34 - MEANWELL - LPF-16D-12 - LPF16D12

Bewertungen (0)

Es gibt keine Produktbewertungenvor.

Bewertung abgeben
Formular verstecken
Wertung:
Name:
E-Mail :
Betreff:
Text:
  Captcha
  Bewertung abgeben
Sie verwirrt?

Wenn Sie Fragen Kauf haben, können Sie die folgenden Links oder E-Mail

Bitte warten





* Pflichtfelder

oder