USP-150-12 USP15012 MEANWELL Eingang: 90-295 AC / 127-417 DC, Ausgabe: 1, V1: 12, A1: 12,5 Vergrößern
Die Bilder sind nur orientativ. Bitte prüfen Sie das Artikelstammdatenblatt.

USP-150-12 USP15012 MEANWELL Eingang: 90-295 AC / 127-417 DC, Ausgabe: 1, V1: 12, A1: 12,5

USP-150-12

USP15012

MEANWELL

Verfügbar

Schiff am heute

Eingang: 90-295 AC / 127-417 DC, Ausgabe: 1, V1: 12, A1: 12,5

Mehr Infos


Spannungsversorgungen

PFC

USP

* Neues Produkt in der Originalverpackung mit allen Garantien und Zertifizierungen von MEANWELL

MengePreis
1+$65.59
5+$60.83
9+$59.59
13+$58.92
17+$58.47
*Dieser Preis ist pro Einheit und ist der Nettowert (ohne Steuern, falls zutreffend).

Wie es funktioniert

Wie funktioniert das?

1 Fügen Sie die Produkte Ihrer Wahl in den Warenkorb
2 Geben Sie Ihre Kontaktdaten und senden Sie Ihre Anfrage
3 Sie werden per E-Mail mit unseren Preisvorschläge mitzuteilen
4 Beenden Sie einfach Ihre Bestellung und Sie erhalten die Produkte

Es gibt verschiedene Möglichkeiten die Zahlung abzuwickeln
- Kreditkarte
- Banküberweisung
- PayPal


Verwandte Produkte

Mehr Infos



150W U-Bracket Single Output with PFC Function 150W U-Bracket Single Output with PFC Function
150W U-Bracket Single Output with PFC Function USP-150series USP-150series
USP-150series Features : Features :
Features : UniversalAC input / Full range(up to 295VAC) UniversalAC input / Full range(up to 295VAC)
UniversalAC input / Full range(up to 295VAC) Built in active PFC function Built in active PFC function
Built in active PFC function Constant Voltage design Constant Voltage design
Constant Voltage design High efficiency up to 93% High efficiency up to 93%
High efficiency up to 93% Protections: Short circuit / Overload / Over voltage/ Over temperature Protections: Short circuit / Overload / Over voltage/ Over temperature
Protections: Short circuit / Overload / Over voltage/ Over temperature Cooling by free air convection Cooling by free air convection
Cooling by free air convection U-bracket low profile:33mm U-bracket low profile:33mm
U-bracket low profile:33mm ZVS technology to reduce power dissipation ZVS technology to reduce power dissipation
ZVS technology to reduce power dissipation 3 years warranty 3 years warranty
3 years warrantySPECIFICATION SPECIFICATION
SPECIFICATION MODEL MODEL
MODEL USP-150-12 USP-150-15 USP-150-24 USP-150-12 USP-150-15 USP-150-24
USP-150-12 USP-150-15 USP-150-24 USP-150-36 USP-150-36
USP-150-36 USP-150-48 USP-150-48
USP-150-48 DC VOLTAGE RATED CURRENT CURRENT RANGE DC VOLTAGE RATED CURRENT CURRENT RANGE
DC VOLTAGE RATED CURRENT CURRENT RANGE 12V 12V
12V 12.5A 12.5A
12.5A 0 ~ 12.5A 0 ~ 12.5A
0 ~ 12.5A 15V 15V
15V 10A 10A
10A 0 ~ 10A 0 ~ 10A
0 ~ 10A 24V 24V
24V 6.3A 6.3A
6.3A 0 ~ 6.3A 0 ~ 6.3A
0 ~ 6.3A 36V 36V
36V 4.2A 4.2A
4.2A 0 ~ 4.2A 0 ~ 4.2A
0 ~ 4.2A 48V 48V
48V 3.2A 3.2A
3.2A 0 ~ 3.2A 0 ~ 3.2A
0 ~ 3.2A RATED POWER RATED POWER
RATED POWER 150W150W151.2W 150W150W151.2W
150W150W151.2W 151.2W 151.2W
151.2W 153.6W 153.6W
153.6W OUTPUT OUTPUT
OUTPUT RIPPLE & NOISE (max.) Note.2100mVp-p150mVp-p150mVp-p RIPPLE & NOISE (max.) Note.2100mVp-p150mVp-p150mVp-p
RIPPLE & NOISE (max.) Note.2100mVp-p150mVp-p150mVp-p 250mVp-p 250mVp-p
250mVp-p 250mVp-p 250mVp-p
250mVp-p VOLTAGE ADJ. RANGE VOLTAGE ADJ. RANGE
VOLTAGE ADJ. RANGE 11.0~13.2V 13.5~16.5V21.6~26.4V 11.0~13.2V 13.5~16.5V21.6~26.4V
11.0~13.2V 13.5~16.5V21.6~26.4V 32.4~39.6V 32.4~39.6V
32.4~39.6V 43.2~52.8V 43.2~52.8V
43.2~52.8V VOLTAGE TOLERANCE Note.32.0% 2.0% 2.0% VOLTAGE TOLERANCE Note.32.0% 2.0% 2.0%
VOLTAGE TOLERANCE Note.32.0% 2.0% 2.0% 2.0% 2.0%
2.0% 2.0% 2.0%
2.0% LINE REGULATION LOAD REGULATION SETUP, RISE TIME LINE REGULATION LOAD REGULATION SETUP, RISE TIME
LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.) HOLD UP TIME (Typ.)
HOLD UP TIME (Typ.) 0.5% 0.5% 0.5% 0.5% 0.5% 0.5%
0.5% 0.5% 0.5% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0%
1.0% 1.0% 1.0% 2000ms, 100ms/230VAC 3000ms, 100ms/115VAC at full load 2000ms, 100ms/230VAC 3000ms, 100ms/115VAC at full load
2000ms, 100ms/230VAC 3000ms, 100ms/115VAC at full load 16ms/230VAC16ms/115VAC at full load 16ms/230VAC16ms/115VAC at full load
16ms/230VAC16ms/115VAC at full load 0.5% 0.5%
0.5% 1.0% 1.0%
1.0% 0.5% 0.5%
0.5% 1.0% 1.0%
1.0% VOLTAGE RANGE Note.4 90 ~ 295VAC127 ~ 417VDC VOLTAGE RANGE Note.4 90 ~ 295VAC127 ~ 417VDC
VOLTAGE RANGE Note.4 90 ~ 295VAC127 ~ 417VDC FREQUENCY RANGE POWER FACTOR (Typ.) FREQUENCY RANGE POWER FACTOR (Typ.)
FREQUENCY RANGE POWER FACTOR (Typ.) 47 ~ 63Hz 47 ~ 63Hz
47 ~ 63Hz PF0.98/115VAC PF0.96/230VAC PF0.94/277VAC at full load PF0.98/115VAC PF0.96/230VAC PF0.94/277VAC at full load
PF0.98/115VAC PF0.96/230VAC PF0.94/277VAC at full load INPUT INPUT
INPUT EFFICIENCY (Typ.) EFFICIENCY (Typ.)
EFFICIENCY (Typ.) 91.5% 91.5%
91.5% 91.5% 93% 91.5% 93%
91.5% 93% 93% 93%
93% 93% 93%
93% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT
AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVERLOAD OVERLOAD
OVERLOAD 2A/115VAC 1A/230VAC0.7A/277VAC Cold start 65A/230VAC 2A/115VAC 1A/230VAC0.7A/277VAC Cold start 65A/230VAC
2A/115VAC 1A/230VAC0.7A/277VAC Cold start 65A/230VAC <2mA / 240VAC <2mA / 240VAC
<2mA / 240VAC 110~160% rated output power 110~160% rated output power
110~160% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed Protection type : Hiccup mode, recovers automatically after fault condition is removed
Protection type : Hiccup mode, recovers automatically after fault condition is removed SHORT CIRCUIT Protection type : Hiccup mode, recovers automatically after fault condition is removed SHORT CIRCUIT Protection type : Hiccup mode, recovers automatically after fault condition is removed
SHORT CIRCUIT Protection type : Hiccup mode, recovers automatically after fault condition is removedPROTECTION PROTECTION
PROTECTIONOVER VOLTAGE OVER VOLTAGE
OVER VOLTAGE 13.6 ~ 16.3V17 ~ 21V 26.7 ~ 32.4V 13.6 ~ 16.3V17 ~ 21V 26.7 ~ 32.4V
13.6 ~ 16.3V17 ~ 21V 26.7 ~ 32.4V 41.4 ~ 48.6V 41.4 ~ 48.6V
41.4 ~ 48.6V 53 ~ 64.8V 53 ~ 64.8V
53 ~ 64.8V ENVIRONMENT ENVIRONMENT
ENVIRONMENTOVER TEMPERATURE WORKING TEMP WORKING HUMIDITY OVER TEMPERATURE WORKING TEMP WORKING HUMIDITY
OVER TEMPERATURE WORKING TEMP WORKING HUMIDITY STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION
STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY STANDARDS
SAFETY STANDARDS Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery
Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery Shut down o/p voltage, recovers automatically after temperature goes down Shut down o/p voltage, recovers automatically after temperature goes down
Shut down o/p voltage, recovers automatically after temperature goes down -30 ~ +65 (Refer to output load derating curve) -30 ~ +65 (Refer to output load derating curve)
-30 ~ +65 (Refer to output load derating curve) 20 ~ 90% RH non-condensing 20 ~ 90% RH non-condensing
20 ~ 90% RH non-condensing -40 ~ +85, 10 ~ 95% RH -40 ~ +85, 10 ~ 95% RH
-40 ~ +85, 10 ~ 95% RH 0.03%/ (0 ~ 60) 0.03%/ (0 ~ 60)
0.03%/ (0 ~ 60) 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1 approved; design refer to IEC60950-1,EN60950-1 UL60950-1 approved; design refer to IEC60950-1,EN60950-1
UL60950-1 approved; design refer to IEC60950-1,EN60950-1 SAFETY & SAFETY &
SAFETY & WITHSTAND VOLTAGE Note.6I/P-O/P:3.0KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC WITHSTAND VOLTAGE Note.6I/P-O/P:3.0KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
WITHSTAND VOLTAGE Note.6I/P-O/P:3.0KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC EMC EMC
EMC (Note 5) (Note 5)
(Note 5)OTHERS OTHERS
OTHERS ISOLATION RESISTANCE EMC EMISSION ISOLATION RESISTANCE EMC EMISSION
ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF DIMENSION EMC IMMUNITY MTBF DIMENSION
EMC IMMUNITY MTBF DIMENSION PACKING PACKING
PACKING I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/25/ 70%RH I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/25/ 70%RH
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/25/ 70%RH Compliance to EN55022 (CISPR22) Class B,EN61000-3-2,EN61000-3-3 Compliance to EN55022 (CISPR22) Class B,EN61000-3-2,EN61000-3-3
Compliance to EN55022 (CISPR22) Class B,EN61000-3-2,EN61000-3-3 Compliance to EN61000-4-2,3,4,5,6,8,11; EN55024, light industry level (surge 4KV),criteria A Compliance to EN61000-4-2,3,4,5,6,8,11; EN55024, light industry level (surge 4KV),criteria A
Compliance to EN61000-4-2,3,4,5,6,8,11; EN55024, light industry level (surge 4KV),criteria A 216.3K hrs min.MIL-HDBK-217F (25) 216.3K hrs min.MIL-HDBK-217F (25)
216.3K hrs min.MIL-HDBK-217F (25) 215*67.4*33mm (L*W*H) 215*67.4*33mm (L*W*H)
215*67.4*33mm (L*W*H) 0.48kg;24PCS/12.5kg/0.61CUFT 0.48kg;24PCS/12.5kg/0.61CUFT
0.48kg;24PCS/12.5kg/0.61CUFTNOTE NOTE
NOTE 1. All parameters NOT speciallymentioned are measured at 230VAC input, ratedload and 25 of ambient temperature. 1. All parameters NOT speciallymentioned are measured at 230VAC input, ratedload and 25 of ambient temperature.
1. All parameters NOT speciallymentioned are measured at 230VAC input, ratedload and 25 of ambient temperature. 2. Ripple & noiseare measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 2. Ripple & noiseare measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
2. Ripple & noiseare measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes setup tolerance, line regulation and load regulation. 3. Tolerance : includes setup tolerance, line regulation and load regulation.
3. Tolerance : includes setup tolerance, line regulation and load regulation. 4. Deratingmay be needed underlow input voltages. Please checkthe static characteristics for more details. 4. Deratingmay be needed underlow input voltages. Please checkthe static characteristics for more details.
4. Deratingmay be needed underlow input voltages. Please checkthe static characteristics for more details. 5. The powersupply is considered a component which will be installedinto a final equipment. All the EMC tests are been executed by mountingthe unit on a 360mm*360mm metalplate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to performthese EMC tests, please refer to "EMI testingof component powersupplies." (as available on http://www.meanwell.com) 5. The powersupply is considered a component which will be installedinto a final equipment. All the EMC tests are been executed by mountingthe unit on a 360mm*360mm metalplate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to performthese EMC tests, please refer to "EMI testingof component powersupplies." (as available on http://www.meanwell.com)
5. The powersupply is considered a component which will be installedinto a final equipment. All the EMC tests are been executed by mountingthe unit on a 360mm*360mm metalplate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to performthese EMC tests, please refer to "EMI testingof component powersupplies." (as available on http://www.meanwell.com) 6. Please remove the component D1 beforeconducted Hipot test. 6. Please remove the component D1 beforeconducted Hipot test.
6. Please remove the component D1 beforeconducted Hipot test.File Name:USP-150-SPEC2016-01-21 File Name:USP-150-SPEC2016-01-21
File Name:USP-150-SPEC2016-01-21

Datasheet - PDF

Title:Language:Size:Type:
pdf-Eingang: 90-295 AC / 127-417 DC, Ausgabe: 1, V1: 12, A1: 12,5 - MEANWELL - USP-150-12 - USP15012English134 Kbytespdf-Eingang: 90-295 AC / 127-417 DC, Ausgabe: 1, V1: 12, A1: 12,5 - MEANWELL - USP-150-12 - USP15012

Bewertungen (0)

Es gibt keine Produktbewertungenvor.

Bewertung abgeben
Formular verstecken
Wertung:
Name:
E-Mail :
Betreff:
Text:
  Captcha
  Bewertung abgeben
Sie verwirrt?

Wenn Sie Fragen Kauf haben, können Sie die folgenden Links oder E-Mail

Bitte warten





* Pflichtfelder

oder