HDP-190 HDP190 MEANWELL Eingang: 90-264 AC / 127-370 DC, Ausgabe: 2, V1: 3,8, A1: 33, V2: 2,8, A2: 20 Vergrößern
Die Bilder sind nur orientativ. Bitte prüfen Sie das Artikelstammdatenblatt.

HDP-190 HDP190 MEANWELL Eingang: 90-264 AC / 127-370 DC, Ausgabe: 2, V1: 3,8, A1: 33, V2: 2,8, A2: 20

HDP-190

HDP190

MEANWELL

Verfügbar

Schiff am heute

Eingang: 90-264 AC / 127-370 DC, Ausgabe: 2, V1: 3,8, A1: 33, V2: 2,8, A2: 20

Mehr Infos


Spannungsversorgungen

PFC

HDP

* Neues Produkt in der Originalverpackung mit allen Garantien und Zertifizierungen von MEANWELL

MengePreis
1+$97.55
3+$92.86
6+$90.61
9+$89.49
12+$88.94
*Dieser Preis ist pro Einheit und ist der Nettowert (ohne Steuern, falls zutreffend).

Wie es funktioniert

Wie funktioniert das?

1 Fügen Sie die Produkte Ihrer Wahl in den Warenkorb
2 Geben Sie Ihre Kontaktdaten und senden Sie Ihre Anfrage
3 Sie werden per E-Mail mit unseren Preisvorschläge mitzuteilen
4 Beenden Sie einfach Ihre Bestellung und Sie erhalten die Produkte

Es gibt verschiedene Möglichkeiten die Zahlung abzuwickeln
- Kreditkarte
- Banküberweisung
- PayPal


Verwandte Produkte

Mehr Infos



190W Dual Output with PFC Function 190W Dual Output with PFC Function
190W Dual Output with PFC Function HDP-190 HDP-190
HDP-190 Features : Features :
Features : UniversalAC input / Full range UniversalAC input / Full range
UniversalAC input / Full range Built-in active PFC function Built-in active PFC function
Built-in active PFC function High efficiency up to 86% High efficiency up to 86%
High efficiency up to 86% Protections: Short circuit / Overload / Over voltage/ Over temperature Protections: Short circuit / Overload / Over voltage/ Over temperature
Protections: Short circuit / Overload / Over voltage/ Over temperature Cooling by free air convection Cooling by free air convection
Cooling by free air convection 1U low profile 36mm 1U low profile 36mm
1U low profile 36mm Conformalcoated Conformalcoated
Conformalcoated ZVStechnology to reduce power dissipation ZVStechnology to reduce power dissipation
ZVStechnology to reduce power dissipation LED indicator for power on LED indicator for power on
LED indicator for power on 3 years warranty 3 years warranty
3 years warranty SPECIFICATION SPECIFICATION
SPECIFICATION Bauar t gepr u f t Bauar t gepr u f t
Bauar t gepr u f t Sicherheit egel ma ge Sicherheit egel ma ge
Sicherheit egel ma ge od o s od o s
od o s be wacg be wacg
be wacg www. tuv. com www. tuv. com
www. tuv. com ID 2000000000 ID 2000000000
ID 2000000000 MODEL MODEL
MODEL OUTPUT OUTPUT
OUTPUT OUTPUT NUMBER DC VOLTAGE RATED CURRENT OUTPUT NUMBER DC VOLTAGE RATED CURRENT
OUTPUT NUMBER DC VOLTAGE RATED CURRENT CURRENT RANGE (max.) RATED POWER CURRENT RANGE (max.) RATED POWER
CURRENT RANGE (max.) RATED POWEROUTPUT POWER (max.) OUTPUT POWER (max.)
OUTPUT POWER (max.) HDP-190 HDP-190
HDP-190 V1 V2 V1 V2
V1 V2 +3.8V+2.8V +3.8V+2.8V
+3.8V+2.8V 33A 20A 33A 20A
33A 20A 0 ~ 40A 0 ~ 22A 0 ~ 40A 0 ~ 22A
0 ~ 40A 0 ~ 22A 181.4W (typ.)192W (max.) 181.4W (typ.)192W (max.)
181.4W (typ.)192W (max.) 192W continue. V1 total power output shall not exceed 160W (max. 40A) ; V2 total power output shall not exceed 66W (max. 22A) (The V1 & V2 combine total power output shall not exceed 192W) 192W continue. V1 total power output shall not exceed 160W (max. 40A) ; V2 total power output shall not exceed 66W (max. 22A) (The V1 & V2 combine total power output shall not exceed 192W)
192W continue. V1 total power output shall not exceed 160W (max. 40A) ; V2 total power output shall not exceed 66W (max. 22A) (The V1 & V2 combine total power output shall not exceed 192W) RIPPLE & NOISE (max.) Note.2100mVp-p100mVp-p RIPPLE & NOISE (max.) Note.2100mVp-p100mVp-p
RIPPLE & NOISE (max.) Note.2100mVp-p100mVp-p VOLTAGE ADJ. RANGE Note.63.6 ~ 4V2.5 ~ 3V VOLTAGE ADJ. RANGE Note.63.6 ~ 4V2.5 ~ 3V
VOLTAGE ADJ. RANGE Note.63.6 ~ 4V2.5 ~ 3V VOLTAGE TOLERANCE Note.32.0% 2.0% VOLTAGE TOLERANCE Note.32.0% 2.0%
VOLTAGE TOLERANCE Note.32.0% 2.0% LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.) LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.)
LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.) 0.5% 0.5% 0.5% 0.5%
0.5% 0.5% 2.0% 2.0% 2.0% 2.0%
2.0% 2.0% 1000ms, 50ms/230VAC 2500ms, 50ms/115VAC at full load 1000ms, 50ms/230VAC 2500ms, 50ms/115VAC at full load
1000ms, 50ms/230VAC 2500ms, 50ms/115VAC at full load 16ms/230VAC16ms/115VAC at full load 16ms/230VAC16ms/115VAC at full load
16ms/230VAC16ms/115VAC at full load VOLTAGE RANGE Note.5 90 ~ 264VAC127 ~ 370VDC VOLTAGE RANGE Note.5 90 ~ 264VAC127 ~ 370VDC
VOLTAGE RANGE Note.5 90 ~ 264VAC127 ~ 370VDCINPUT INPUT
INPUT FREQUENCY RANGE POWER FACTOR (Typ.) EFFICIENCY (Typ.) FREQUENCY RANGE POWER FACTOR (Typ.) EFFICIENCY (Typ.)
FREQUENCY RANGE POWER FACTOR (Typ.) EFFICIENCY (Typ.) AC CURRENT (Typ.) AC CURRENT (Typ.)
AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT INRUSH CURRENT (Typ.) LEAKAGE CURRENT
INRUSH CURRENT (Typ.) LEAKAGE CURRENTOVERLOAD OVERLOAD
OVERLOAD 47 ~ 63Hz 47 ~ 63Hz
47 ~ 63Hz PF0.94/230VACPF0.98/115VAC at full load PF0.94/230VACPF0.98/115VAC at full load
PF0.94/230VACPF0.98/115VAC at full load 86% 86%
86% 2.7A/115VAC1.1A/230VAC 2.7A/115VAC1.1A/230VAC
2.7A/115VAC1.1A/230VAC 30A/115VAC45A/230VAC 30A/115VAC45A/230VAC
30A/115VAC45A/230VAC <0.7mA / 240VAC <0.7mA / 240VAC
<0.7mA / 240VAC V1+V2: 105 ~ 150% max. output power ; or V2: 125 ~ 170% rated current V1+V2: 105 ~ 150% max. output power ; or V2: 125 ~ 170% rated current
V1+V2: 105 ~ 150% max. output power ; or V2: 125 ~ 170% rated current Protection type: Hiccup mode, recovers automatically after fault condition is removed Protection type: Hiccup mode, recovers automatically after fault condition is removed
Protection type: Hiccup mode, recovers automatically after fault condition is removedPROTECTION PROTECTION
PROTECTION ENVIRONMENT ENVIRONMENT
ENVIRONMENT SAFETY & EMC SAFETY & EMC
SAFETY & EMCOVER VOLTAGE OVER VOLTAGE
OVER VOLTAGEOVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY
OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY STORAGE TEMP., HUMIDITY STORAGE TEMP., HUMIDITY
STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION TEMP. COEFFICIENT VIBRATION
TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE ISOLATION RESISTANCE SAFETY STANDARDS WITHSTAND VOLTAGE ISOLATION RESISTANCE
SAFETY STANDARDS WITHSTAND VOLTAGE ISOLATION RESISTANCE V1: 4.37 ~ 5.13V V1: 4.37 ~ 5.13V
V1: 4.37 ~ 5.13V Protection type : Shut down o/p voltage, re-power on to recover Protection type : Shut down o/p voltage, re-power on to recover
Protection type : Shut down o/p voltage, re-power on to recover Shut down o/p voltage, re-power on to recovery Shut down o/p voltage, re-power on to recovery
Shut down o/p voltage, re-power on to recovery -30 ~ +70C (Refer to "Derating Curve") -30 ~ +70C (Refer to "Derating Curve")
-30 ~ +70C (Refer to "Derating Curve") 20 ~ 90% RH non-condensing 20 ~ 90% RH non-condensing
20 ~ 90% RH non-condensing -40 ~ +85C, 10 ~ 95% RH -40 ~ +85C, 10 ~ 95% RH
-40 ~ +85C, 10 ~ 95% RH 0.03%/C (0 ~ 50C) 0.03%/C (0 ~ 50C)
0.03%/C (0 ~ 50C) 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1, CCC GB4943.1 approved UL60950-1, TUV EN60950-1, CCC GB4943.1 approved
UL60950-1, TUV EN60950-1, CCC GB4943.1 approved I/P-O/P:3KVAC I/P-FG:2KVACO/P-FG:0.5KVAC I/P-O/P:3KVAC I/P-FG:2KVACO/P-FG:0.5KVAC
I/P-O/P:3KVAC I/P-FG:2KVACO/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25C/ 70% RH I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25C/ 70% RH
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25C/ 70% RH V2: 3.22 ~ 3.78V V2: 3.22 ~ 3.78V
V2: 3.22 ~ 3.78V (Note 4) (Note 4)
(Note 4)OTHERS OTHERS
OTHERS EMC EMISSION EMC EMISSION
EMC EMISSION EMC IMMUNITY MTBF DIMENSION EMC IMMUNITY MTBF DIMENSION
EMC IMMUNITY MTBF DIMENSION PACKING PACKING
PACKING Compliance to EN55022 (CISPR22), GB9254,class B, EN61000-3-2,-3, GB17625.1 Compliance to EN55022 (CISPR22), GB9254,class B, EN61000-3-2,-3, GB17625.1
Compliance to EN55022 (CISPR22), GB9254,class B, EN61000-3-2,-3, GB17625.1 Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2, heavy industry level, criteria A Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2, heavy industry level, criteria A
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2, heavy industry level, criteria A 111.3K hrs min.MIL-HDBK-217F (25C) 111.3K hrs min.MIL-HDBK-217F (25C)
111.3K hrs min.MIL-HDBK-217F (25C) 215*115*36mm (L*W*H) 215*115*36mm (L*W*H)
215*115*36mm (L*W*H) 0.95Kg; 15pcs/15.3Kg/0.7CUFT 0.95Kg; 15pcs/15.3Kg/0.7CUFT
0.95Kg; 15pcs/15.3Kg/0.7CUFTNOTE NOTE
NOTE 1. All parameters NOT speciallymentioned are measured at 230VAC input, ratedload and 25C of ambient temperature. 1. All parameters NOT speciallymentioned are measured at 230VAC input, ratedload and 25C of ambient temperature.
1. All parameters NOT speciallymentioned are measured at 230VAC input, ratedload and 25C of ambient temperature. 2. Ripple & noiseare measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 2. Ripple & noiseare measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
2. Ripple & noiseare measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes setup tolerance, line regulation and load regulation. 3. Tolerance : includes setup tolerance, line regulation and load regulation.
3. Tolerance : includes setup tolerance, line regulation and load regulation. 4. The powersupply is considered a component which will be installedinto a final equipment. All the EMC tests are been executed by mountingthe unit on a 360mm*360mm metalplate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to performthese EMC tests, please refer to "EMI testingof component powersupplies." (as available on http://www.meanwell.com) 4. The powersupply is considered a component which will be installedinto a final equipment. All the EMC tests are been executed by mountingthe unit on a 360mm*360mm metalplate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to performthese EMC tests, please refer to "EMI testingof component powersupplies." (as available on http://www.meanwell.com)
4. The powersupply is considered a component which will be installedinto a final equipment. All the EMC tests are been executed by mountingthe unit on a 360mm*360mm metalplate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to performthese EMC tests, please refer to "EMI testingof component powersupplies." (as available on http://www.meanwell.com) 5. Deratingmay be needed underlow input voltages. Please checkthe derating curvefor more details. 5. Deratingmay be needed underlow input voltages. Please checkthe derating curvefor more details.
5. Deratingmay be needed underlow input voltages. Please checkthe derating curvefor more details. 6. Outputvoltagebetween V1 and V2 shouldbe higher than1.0V(V1-V21.0V). 6. Outputvoltagebetween V1 and V2 shouldbe higher than1.0V(V1-V21.0V).
6. Outputvoltagebetween V1 and V2 shouldbe higher than1.0V(V1-V21.0V). File Name:HDP-190-SPEC2016-01-21 File Name:HDP-190-SPEC2016-01-21
File Name:HDP-190-SPEC2016-01-21

Datasheet - PDF

Title:Language:Size:Type:
pdf-Eingang: 90-264 AC / 127-370 DC, Ausgabe: 2, V1: 3,8, A1: 33, V2: 2,8, A2: 20 - MEANWELL - HDP-190 - HDP19English143 Kbytespdf-Eingang: 90-264 AC / 127-370 DC, Ausgabe: 2, V1: 3,8, A1: 33, V2: 2,8, A2: 20 - MEANWELL - HDP-190 - HDP19

Bewertungen (0)

Es gibt keine Produktbewertungenvor.

Bewertung abgeben
Formular verstecken
Wertung:
Name:
E-Mail :
Betreff:
Text:
  Captcha
  Bewertung abgeben
Sie verwirrt?

Wenn Sie Fragen Kauf haben, können Sie die folgenden Links oder E-Mail

Bitte warten





* Pflichtfelder

oder