ADD-155B ADD155B MEANWELL Eingang: 88-264 AC / 124-370 DC, Ausgabe: 3, V1: 27,6, A1: 5, V2: 5, A2: 3, V3: 27.. Vergrößern
Die Bilder sind nur orientativ. Bitte prüfen Sie das Artikelstammdatenblatt.

ADD-155B ADD155B MEANWELL Eingang: 88-264 AC / 124-370 DC, Ausgabe: 3, V1: 27,6, A1: 5, V2: 5, A2: 3, V3: 27..

ADD-155B

ADD155B

MEANWELL

Verfügbar

Schiff am heute

Eingang: 88-264 AC / 124-370 DC, Ausgabe: 3, V1: 27,6, A1: 5, V2: 5, A2: 3, V3: 27,1, A3: 0,5

Mehr Infos


Spannungsversorgungen

SICHERHEIT

ADD

* Neues Produkt in der Originalverpackung mit allen Garantien und Zertifizierungen von MEANWELL

MengePreis
1+$71.91
4+$67.38
8+$65.73
12+$64.91
16+$64.45
*Dieser Preis ist pro Einheit und ist der Nettowert (ohne Steuern, falls zutreffend).

Wie es funktioniert

Wie funktioniert das?

1 Fügen Sie die Produkte Ihrer Wahl in den Warenkorb
2 Geben Sie Ihre Kontaktdaten und senden Sie Ihre Anfrage
3 Sie werden per E-Mail mit unseren Preisvorschläge mitzuteilen
4 Beenden Sie einfach Ihre Bestellung und Sie erhalten die Produkte

Es gibt verschiedene Möglichkeiten die Zahlung abzuwickeln
- Kreditkarte
- Banküberweisung
- PayPal


Verwandte Produkte

Mehr Infos



1 5 5 W D u a l O u t p u t w i t h B a t t e r y C h a r g e r ( U P S F u n c t i o n )A D D - 1 5 5s e r i e s 1 5 5 W D u a l O u t p u t w i t h B a t t e r y C h a r g e r ( U P S F u n c t i o n )A D D - 1 5 5s e r i e s
1 5 5 W D u a l O u t p u t w i t h B a t t e r y C h a r g e r ( U P S F u n c t i o n )A D D - 1 5 5s e r i e s Features : Features :
Features : Universal AC input / Full range Universal AC input / Full range
Universal AC input / Full range Built-in active PFCfunction Built-in active PFCfunction
Built-in active PFCfunction Protections: Shortcircuit / Overload / Over voltage Protections: Shortcircuit / Overload / Over voltage
Protections: Shortcircuit / Overload / Over voltage Battery low/battery polarity protections Battery low/battery polarity protections
Battery low/battery polarity protections Cooling by free air convection Cooling by free air convection
Cooling by free air convection 100% full load burn-in test 100% full load burn-in test
100% full load burn-in test Fixed switching frequency at PFC67KHz, PWM 134KHz Fixed switching frequency at PFC67KHz, PWM 134KHz
Fixed switching frequency at PFC67KHz, PWM 134KHz 2 years warranty 2 years warranty
2 years warranty SPECIFICATION SPECIFICATION
SPECIFICATION MODEL MODEL
MODEL ADD-155A ADD-155A
ADD-155A ADD-155B ADD-155C ADD-155B ADD-155C
ADD-155B ADD-155C OUTPUT NUMBER DC VOLTAGE OUTPUT NUMBER DC VOLTAGE
OUTPUT NUMBER DC VOLTAGE CH1 CH1
CH1 13.8V 13.8V
13.8V CH2 CH2
CH2 5V 5V
5V CH3 CH3
CH3 13.3V 13.3V
13.3V CH1 CH1
CH1 27.6V 27.6V
27.6V CH2 CH2
CH2 5V 5V
5V CH3 CH3
CH3 27.1V 27.1V
27.1V CH1 CH1
CH1 54V 54V
54V CH2 CH2
CH2 5V 5V
5V CH3 CH3
CH3 53.5V 53.5V
53.5V RATED CURRENT CURRENT RANGE RATED CURRENT CURRENT RANGE
RATED CURRENT CURRENT RANGE 9.5A 9.5A
9.5A 0 ~ 10.5A 0 ~ 10.5A
0 ~ 10.5A 3A 0.5A 3A 0.5A
3A 0.5A 0 ~ 3A -------- 0 ~ 3A --------
0 ~ 3A -------- 4.5A 4.5A
4.5A 0 ~ 5A 0 ~ 5A
0 ~ 5A 3A 3A
3A 0 ~ 3A 0 ~ 3A
0 ~ 3A 0.5A 0.5A
0.5A -------- --------
-------- 2.3A 2.3A
2.3A 0 ~ 2.5A 0 ~ 2.5A
0 ~ 2.5A 3A 3A
3A 0 ~ 3A 0 ~ 3A
0 ~ 3A 0.2A 0.2A
0.2A -------- --------
-------- RATED POWER RATED POWER
RATED POWER 152.75W 152.75W
152.75W 152.75W149.9W 152.75W149.9W
152.75W149.9WOUTPUT OUTPUT
OUTPUT RIPPLE & NOISE (max.)Note.2150mVp-p RIPPLE & NOISE (max.)Note.2150mVp-p
RIPPLE & NOISE (max.)Note.2150mVp-p 100mVp-p-------- 100mVp-p--------
100mVp-p-------- 200mVp-p 200mVp-p
200mVp-p 100mVp-p 100mVp-p
100mVp-p -------- --------
-------- 240mVp-p 240mVp-p
240mVp-p 100mVp-p 100mVp-p
100mVp-p -------- --------
-------- VOLTAGE ADJ. RANGE VOLTAGE ADJ. RANGE
VOLTAGE ADJ. RANGE CH1: 12 ~ 14.5V CH1: 12 ~ 14.5V
CH1: 12 ~ 14.5V CH1: 24 ~ 29V CH1: 48 ~ 58V CH1: 24 ~ 29V CH1: 48 ~ 58V
CH1: 24 ~ 29V CH1: 48 ~ 58V VOLTAGE TOLERANCE Note.3 2.0%3.0% VOLTAGE TOLERANCE Note.3 2.0%3.0%
VOLTAGE TOLERANCE Note.3 2.0%3.0% -------- --------
-------- 1.0% 1.0%
1.0% 3.0% 3.0%
3.0% -------- --------
-------- 1.0% 5.0% 1.0% 5.0%
1.0% 5.0% -------- --------
-------- LINE REGULATION LOAD REGULATION LINE REGULATION LOAD REGULATION
LINE REGULATION LOAD REGULATION 1.0%0.5% 1.0%0.5%
1.0%0.5% 1.0%2.0% 1.0%2.0%
1.0%2.0% -------- --------
-------- -------- --------
-------- 1.0% 1.0%
1.0% 1.0% 1.0%
1.0% 0.5% 0.5%
0.5% 2.0% 2.0%
2.0% -------- --------
-------- -------- --------
-------- 1.0% 1.0%
1.0% 1.0% 1.0%
1.0% 0.5% 0.5%
0.5% 2.0% 2.0%
2.0% -------- --------
-------- -------- --------
-------- SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE
SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE FREQUENCY RANGE
FREQUENCY RANGE 1000ms, 90ms/230VAC 2000ms, 90ms/115VAC at full load 1000ms, 90ms/230VAC 2000ms, 90ms/115VAC at full load
1000ms, 90ms/230VAC 2000ms, 90ms/115VAC at full load 24ms/230VAC 20ms/115VAC at full load 24ms/230VAC 20ms/115VAC at full load
24ms/230VAC 20ms/115VAC at full load 88 ~ 264VAC 124 ~ 370VDC 88 ~ 264VAC 124 ~ 370VDC
88 ~ 264VAC 124 ~ 370VDC 47 ~ 63Hz 47 ~ 63Hz
47 ~ 63Hz POWER FACTOR (Typ.) PF>0.92 at full load POWER FACTOR (Typ.) PF>0.92 at full load
POWER FACTOR (Typ.) PF>0.92 at full load INPUT INPUT
INPUT EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT
EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENTOVERLOAD OVERLOAD
OVERLOAD 78%81% 81% 78%81% 81%
78%81% 81% 2.5A/115VAC 1.5A/230VAC 2.5A/115VAC 1.5A/230VAC
2.5A/115VAC 1.5A/230VAC COLD START 23A/115VAC 45A/230VAC COLD START 23A/115VAC 45A/230VAC
COLD START 23A/115VAC 45A/230VAC <1mA / 240VAC <1mA / 240VAC
<1mA / 240VAC CH1,CH2:105 ~ 135% CH3:0.51 ~ 0.9A rated output power CH1,CH2:105 ~ 135% CH3:0.51 ~ 0.9A rated output power
CH1,CH2:105 ~ 135% CH3:0.51 ~ 0.9A rated output power Protection type : AC Charging Mode : Constant current limiting, recovers automatically after fault condition is removed Protection type : AC Charging Mode : Constant current limiting, recovers automatically after fault condition is removed
Protection type : AC Charging Mode : Constant current limiting, recovers automatically after fault condition is removed UPS Mode : Protected by internal fuse UPS Mode : Protected by internal fuse
UPS Mode : Protected by internal fuse PROTECTION PROTECTION
PROTECTIONOVER VOLTAGE OVER VOLTAGE
OVER VOLTAGE CH1:15.87 ~ 18.63V CH1:15.87 ~ 18.63V
CH1:15.87 ~ 18.63V CH1:31.74 ~ 37.26V CH1:62.1 ~ 72.9V CH1:31.74 ~ 37.26V CH1:62.1 ~ 72.9V
CH1:31.74 ~ 37.26V CH1:62.1 ~ 72.9V Protection type : Shut down o/p voltage, re-power on to recover Protection type : Shut down o/p voltage, re-power on to recover
Protection type : Shut down o/p voltage, re-power on to recover ENVIRONMENT ENVIRONMENT
ENVIRONMENT BATTERY LOW WORKING TEMP. WORKING HUMIDITY BATTERY LOW WORKING TEMP. WORKING HUMIDITY
BATTERY LOW WORKING TEMP. WORKING HUMIDITY STORAGE TEMP., HUMIDITY STORAGE TEMP., HUMIDITY
STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT TEMP. COEFFICIENT
TEMP. COEFFICIENT 10V0.8V 10V0.8V
10V0.8V -10 ~ +60 (Refer to "Derating Curve") -10 ~ +60 (Refer to "Derating Curve")
-10 ~ +60 (Refer to "Derating Curve") 20 ~ 90% RH non-condensing 20 ~ 90% RH non-condensing
20 ~ 90% RH non-condensing -20 ~ +85, 10 ~ 95% RH -20 ~ +85, 10 ~ 95% RH
-20 ~ +85, 10 ~ 95% RH 0.03%/ (0 ~ 50) on +5V output 0.03%/ (0 ~ 50) on +5V output
0.03%/ (0 ~ 50) on +5V output 19.5V(+1.5V,-1V ) 39V2V 19.5V(+1.5V,-1V ) 39V2V
19.5V(+1.5V,-1V ) 39V2V SAFETY & EMC SAFETY & EMC
SAFETY & EMC (Note 4) (Note 4)
(Note 4)OTHERS OTHERS
OTHERS VIBRATION VIBRATION
VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION SAFETY STANDARDS WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION
SAFETY STANDARDS WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF DIMENSION EMC IMMUNITY MTBF DIMENSION
EMC IMMUNITY MTBF DIMENSION PACKING PACKING
PACKING 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 approved UL60950-1, TUV EN60950-1 approved
UL60950-1, TUV EN60950-1 approved I/P-O/P:3KVACI/P-FG:2.0KVACO/P-FG:0.5KVAC I/P-O/P:3KVACI/P-FG:2.0KVACO/P-FG:0.5KVAC
I/P-O/P:3KVACI/P-FG:2.0KVACO/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A 164.2K hrs min. MIL-HDBK-217F (25) 164.2K hrs min. MIL-HDBK-217F (25)
164.2K hrs min. MIL-HDBK-217F (25) 199*110*50mm (L*W*H) 199*110*50mm (L*W*H)
199*110*50mm (L*W*H) 1Kg; 16pcs/16Kg/0.95CUFT 1Kg; 16pcs/16Kg/0.95CUFT
1Kg; 16pcs/16Kg/0.95CUFTNOTE NOTE
NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, ratedload and 25 of ambient temperature. 1. All parameters NOT specially mentioned are measured at 230VAC input, ratedload and 25 of ambient temperature.
1. All parameters NOT specially mentioned are measured at 230VAC input, ratedload and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 3. Tolerance : includes set up tolerance, line regulation and load regulation.
3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com) EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com)
EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com)Fi le Name:ADD-155-SPEC2 015-11-18 Fi le Name:ADD-155-SPEC2 015-11-18
Fi le Name:ADD-155-SPEC2 015-11-18

Datasheet - PDF

Title:Language:Size:Type:
pdf1-Eingang: 88-264 AC / 124-370 DC, Ausgabe: 3, V1: 27,6, A1: 5, V2: 5, A2: 3, V3: 27,1 - MEANWELL - ADD-155English218 Kbytespdf1-Eingang: 88-264 AC / 124-370 DC, Ausgabe: 3, V1: 27,6, A1: 5, V2: 5, A2: 3, V3: 27,1 - MEANWELL - ADD-155

Bewertungen (0)

Es gibt keine Produktbewertungenvor.

Bewertung abgeben
Formular verstecken
Wertung:
Name:
E-Mail :
Betreff:
Text:
  Captcha
  Bewertung abgeben
Sie verwirrt?

Wenn Sie Fragen Kauf haben, können Sie die folgenden Links oder E-Mail

Bitte warten





* Pflichtfelder

oder