HVG-65-15A HVG6515A MEANWELL Eingang: 180-528 AC / 254-747 DC, Ausgabe: 1, V1: 15, A1: 4,3 Vergrößern
Die Bilder sind nur orientativ. Bitte prüfen Sie das Artikelstammdatenblatt.

HVG-65-15A HVG6515A MEANWELL Eingang: 180-528 AC / 254-747 DC, Ausgabe: 1, V1: 15, A1: 4,3

HVG-65-15A

HVG6515A

MEANWELL

Verfügbar

Schiff am heute

Eingang: 180-528 AC / 254-747 DC, Ausgabe: 1, V1: 15, A1: 4,3

Mehr Infos


Spannungsversorgungen

LED-Treiber

HVG

* Neues Produkt in der Originalverpackung mit allen Garantien und Zertifizierungen von MEANWELL

MengePreis
1+$67.71
5+$62.86
9+$61.59
13+$60.91
17+$60.54
*Dieser Preis ist pro Einheit und ist der Nettowert (ohne Steuern, falls zutreffend).

Wie es funktioniert

Wie funktioniert das?

1 Fügen Sie die Produkte Ihrer Wahl in den Warenkorb
2 Geben Sie Ihre Kontaktdaten und senden Sie Ihre Anfrage
3 Sie werden per E-Mail mit unseren Preisvorschläge mitzuteilen
4 Beenden Sie einfach Ihre Bestellung und Sie erhalten die Produkte

Es gibt verschiedene Möglichkeiten die Zahlung abzuwickeln
- Kreditkarte
- Banküberweisung
- PayPal


Verwandte Produkte

Mehr Infos



65W Single Output Switching Power Supply 65W Single Output Switching Power Supply
65W Single Output Switching Power Supply HVG-65series HVG-65series
HVG-65series Features : Features :
Features : Wide input range 180$528VAC Wide input range 180$528VAC
Wide input range 180$528VAC Built-in active PFC function Built-in active PFC function
Built-in active PFC function High efficiencyup to 90% High efficiencyup to 90%
High efficiencyup to 90% Protections: Short circuit / Over current / Over voltage / Over temperature Protections: Short circuit / Over current / Over voltage / Over temperature
Protections: Short circuit / Over current / Over voltage / Over temperature Cooling by free air convection Cooling by free air convection
Cooling by free air convection OCP point adjustable through outputcable or internal potentiometer OCP point adjustable through outputcable or internal potentiometer
OCP point adjustable through outputcable or internal potentiometer IP67 / IP65 design for indoor or outdoorinstallations IP67 / IP65 design for indoor or outdoorinstallations
IP67 / IP65 design for indoor or outdoorinstallations Class 2 powerunit Class 2 powerunit
Class 2 powerunit Three in one dimmingfunction(0$10Vdc or 10V PWM signal or resistance) Three in one dimmingfunction(0$10Vdc or 10V PWM signal or resistance)
Three in one dimmingfunction(0$10Vdc or 10V PWM signal or resistance) Suitable for LED lighting and street lighting applications Suitable for LED lighting and street lighting applications
Suitable for LED lighting and street lighting applications Compliance to worldwide safety regulations for lighting Compliance to worldwide safety regulations for lighting
Compliance to worldwide safety regulations for lighting Suitable for dry / damp / wet locations Suitable for dry / damp / wet locations
Suitable for dry / damp / wet locations 5 years warranty(Note.9) 5 years warranty(Note.9)
5 years warranty(Note.9) IP65IP67 IP65IP67
IP65IP67HVG-65-12A HVG-65-12A
HVG-65-12A A : IP65 rated. Output voltageand constant currentlevel can be adjusted throughinternal potentiometer. A : IP65 rated. Output voltageand constant currentlevel can be adjusted throughinternal potentiometer.
A : IP65 rated. Output voltageand constant currentlevel can be adjusted throughinternal potentiometer. B : IP67 rated. Constantcurrent level adjustablethrough output cable with 0$10Vdc or 10V PWM signal or resistance. D (option) : IP67 rated. Timer dimming function, contact MEAN WELL for details. B : IP67 rated. Constantcurrent level adjustablethrough output cable with 0$10Vdc or 10V PWM signal or resistance. D (option) : IP67 rated. Timer dimming function, contact MEAN WELL for details.
B : IP67 rated. Constantcurrent level adjustablethrough output cable with 0$10Vdc or 10V PWM signal or resistance. D (option) : IP67 rated. Timer dimming function, contact MEAN WELL for details.SPECIFICATION SPECIFICATION
SPECIFICATION MODEL MODEL
MODELHVG-65-12 HVG-65-12
HVG-65-12HVG-65-15 HVG-65-15
HVG-65-15HVG-65-20 HVG-65-24 HVG-65-30 HVG-65-36 HVG-65-42 HVG-65-48 HVG-65-54 HVG-65-20 HVG-65-24 HVG-65-30 HVG-65-36 HVG-65-42 HVG-65-48 HVG-65-54
HVG-65-20 HVG-65-24 HVG-65-30 HVG-65-36 HVG-65-42 HVG-65-48 HVG-65-54 DC VOLTAGE DC VOLTAGE
DC VOLTAGE 12V 12V
12V 15V 15V
15V 20V 20V
20V 24V30V 24V30V
24V30V 36V 36V
36V 42V 42V
42V 48V 48V
48V 54V 54V
54V CONSTANT CURRENT REGION Note.4 7.2 ~12V 9 ~ 15V 12 ~ 20V 14.4 ~ 24V18 ~ 30V 21.6 ~ 36V CONSTANT CURRENT REGION Note.4 7.2 ~12V 9 ~ 15V 12 ~ 20V 14.4 ~ 24V18 ~ 30V 21.6 ~ 36V
CONSTANT CURRENT REGION Note.4 7.2 ~12V 9 ~ 15V 12 ~ 20V 14.4 ~ 24V18 ~ 30V 21.6 ~ 36V 25.2 ~ 42V 25.2 ~ 42V
25.2 ~ 42V 28.8 ~ 48V32.4 ~ 54V 28.8 ~ 48V32.4 ~ 54V
28.8 ~ 48V32.4 ~ 54V RATED CURRENT RATED CURRENT
RATED CURRENT 5A4.3A 5A4.3A
5A4.3A 3.25A2.71A 3.25A2.71A
3.25A2.71A 2.17A1.81A 2.17A1.81A
2.17A1.81A 1.55A 1.55A
1.55A 1.36A 1.36A
1.36A 1.21A 1.21A
1.21A RATED POWER RATED POWER
RATED POWER 60W 60W
60W 64.5W 64.5W
64.5W 65W 65W
65W 65W 65.1W 65.2W 65W 65.1W 65.2W
65W 65.1W 65.2W 65.1W 65.1W
65.1W 65.3W 65.3W
65.3W 65.3W 65.3W
65.3W RIPPLE & NOISE (max.) Note.2120mVp-p RIPPLE & NOISE (max.) Note.2120mVp-p
RIPPLE & NOISE (max.) Note.2120mVp-p VOLTAGE ADJ. RANGE Note.6 10.8 ~ 13.5V VOLTAGE ADJ. RANGE Note.6 10.8 ~ 13.5V
VOLTAGE ADJ. RANGE Note.6 10.8 ~ 13.5V 150mVp-p 150mVp-p
150mVp-p 13.5 ~ 17V 13.5 ~ 17V
13.5 ~ 17V 150mVp-p 150mVp-p
150mVp-p 17 ~ 22V 17 ~ 22V
17 ~ 22V 150mVp-p 150mVp-p
150mVp-p 22 ~ 27V 22 ~ 27V
22 ~ 27V 200mVp-p 200mVp-p
200mVp-p 27 ~ 33V 27 ~ 33V
27 ~ 33V 200mVp-p 200mVp-p
200mVp-p 33 ~ 40V 33 ~ 40V
33 ~ 40V 300mVp-p 300mVp-p
300mVp-p 38 ~ 46V 38 ~ 46V
38 ~ 46V 300mVp-p 300mVp-p
300mVp-p 43 ~ 53V 43 ~ 53V
43 ~ 53V 300mVp-p 300mVp-p
300mVp-p 49 ~ 58V 49 ~ 58V
49 ~ 58VOUTPUT OUTPUT
OUTPUTCURRENT ADJ. RANGE CURRENT ADJ. RANGE
CURRENT ADJ. RANGE Can be adjusted by internal potentiometer A type only Can be adjusted by internal potentiometer A type only
Can be adjusted by internal potentiometer A type only 3 ~ 5A 3 ~ 5A
3 ~ 5A 2.58 ~ 4.3A 2.58 ~ 4.3A
2.58 ~ 4.3A 1.95 ~ 3.25A 1.62 ~ 2.71A 1.3 ~ 2.17A 1.08 ~ 1.81A 0.93 ~ 1.55A 0.81 ~ 1.36A 0.72 ~ 1.21A 1.95 ~ 3.25A 1.62 ~ 2.71A 1.3 ~ 2.17A 1.08 ~ 1.81A 0.93 ~ 1.55A 0.81 ~ 1.36A 0.72 ~ 1.21A
1.95 ~ 3.25A 1.62 ~ 2.71A 1.3 ~ 2.17A 1.08 ~ 1.81A 0.93 ~ 1.55A 0.81 ~ 1.36A 0.72 ~ 1.21A VOLTAGE TOLERANCE Note.3 2.0% VOLTAGE TOLERANCE Note.3 2.0%
VOLTAGE TOLERANCE Note.3 2.0% 2.0% 2.0%
2.0% 1.0%1.0%1.0%1.0% 1.0%1.0%1.0%1.0%
1.0%1.0%1.0%1.0% 1.0% 1.0%
1.0% 1.0% 1.0%
1.0% 1.0% 1.0%
1.0% LINE REGULATION LOAD REGULATION LINE REGULATION LOAD REGULATION
LINE REGULATION LOAD REGULATION 0.5% 0.5%
0.5% 1.5% 1.5%
1.5% 0.5% 0.5%
0.5% 1.5% 1.5%
1.5% 0.5%0.5%0.5%0.5% 0.5%0.5%0.5%0.5%
0.5%0.5%0.5%0.5% 0.5%0.5%0.5%0.5% 0.5%0.5%0.5%0.5%
0.5%0.5%0.5%0.5% 0.5% 0.5%
0.5% 0.5% 0.5%
0.5% 0.5% 0.5%
0.5% 0.5% 0.5%
0.5% 0.5% 0.5%
0.5% 0.5% 0.5%
0.5% SETUP, RISE TIME HOLD UP TIME (Typ.) SETUP, RISE TIME HOLD UP TIME (Typ.)
SETUP, RISE TIME HOLD UP TIME (Typ.) 500ms, 80ms / 230VAC 400ms, 80ms / 347VAC / 480VAC at full load 500ms, 80ms / 230VAC 400ms, 80ms / 347VAC / 480VAC at full load
500ms, 80ms / 230VAC 400ms, 80ms / 347VAC / 480VAC at full load Btype 500ms, 80ms / 230VAC 500ms, 80ms / 347VAC / 480VAC at 95% load Btype 500ms, 80ms / 230VAC 500ms, 80ms / 347VAC / 480VAC at 95% load
Btype 500ms, 80ms / 230VAC 500ms, 80ms / 347VAC / 480VAC at 95% load 16ms / 347VAC30ms / 480VAC at full load 16ms / 347VAC30ms / 480VAC at full load
16ms / 347VAC30ms / 480VAC at full load VOLTAGE RANGENote.5 180 ~ 528VAC254VDC ~ 747VDC VOLTAGE RANGENote.5 180 ~ 528VAC254VDC ~ 747VDC
VOLTAGE RANGENote.5 180 ~ 528VAC254VDC ~ 747VDC FREQUENCY RANGE POWER FACTOR (Typ.) FREQUENCY RANGE POWER FACTOR (Typ.)
FREQUENCY RANGE POWER FACTOR (Typ.) TOTAL HARMONIC DISTORTION TOTAL HARMONIC DISTORTION
TOTAL HARMONIC DISTORTION 47 ~ 63Hz 47 ~ 63Hz
47 ~ 63Hz PF0.98/230VAC, PF0.97/277VAC, PF0.97/347VAC, PF0.93/480VAC at full load (Please refer to "Power Factor Characteristic"curve) Total harmonic distortion will be lower than 20% when output loading is 60% or higher at 230VAC / 277VAC / 347VAC PF0.98/230VAC, PF0.97/277VAC, PF0.97/347VAC, PF0.93/480VAC at full load (Please refer to "Power Factor Characteristic"curve) Total harmonic distortion will be lower than 20% when output loading is 60% or higher at 230VAC / 277VAC / 347VAC
PF0.98/230VAC, PF0.97/277VAC, PF0.97/347VAC, PF0.93/480VAC at full load (Please refer to "Power Factor Characteristic"curve) Total harmonic distortion will be lower than 20% when output loading is 60% or higher at 230VAC / 277VAC / 347VAC Total harmonic distortion will be lower than 20% when output loading is 75% or higher at 480VAC Total harmonic distortion will be lower than 20% when output loading is 75% or higher at 480VAC
Total harmonic distortion will be lower than 20% when output loading is 75% or higher at 480VAC INPUT INPUT
INPUT EFFICIENCY (Typ.) EFFICIENCY (Typ.)
EFFICIENCY (Typ.) 86.5% 86.5%
86.5% 87.5% 87.5%
87.5% 88.5% 88.5%
88.5% 89% 89% 89% 89%
89% 89% 89.5% 89.5%
89.5% 89.5% 89.5%
89.5% 90% 90%
90% 90% 90%
90% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.)
AC CURRENT (Typ.) INRUSH CURRENT (Typ.) MAX. No. of PSUs on 16A MAX. No. of PSUs on 16A
MAX. No. of PSUs on 16A 0.22A / 347VAC0.18A / 480VAC 0.22A / 347VAC0.18A / 480VAC
0.22A / 347VAC0.18A / 480VAC COLD START 25A(twidth=420s measured at 50% Ipeak) at 480VAC COLD START 25A(twidth=420s measured at 50% Ipeak) at 480VAC
COLD START 25A(twidth=420s measured at 50% Ipeak) at 480VAC CIRCUIT BREAKER 12 units (circuit breaker of type B) / 20 units(circuit breaker of type C) at 480VAC CIRCUIT BREAKER 12 units (circuit breaker of type B) / 20 units(circuit breaker of type C) at 480VAC
CIRCUIT BREAKER 12 units (circuit breaker of type B) / 20 units(circuit breaker of type C) at 480VAC PROTECTION PROTECTION
PROTECTION LEAKAGE CURRENT OVER CURRENT LEAKAGE CURRENT OVER CURRENT
LEAKAGE CURRENT OVER CURRENT SHORT CIRCUIT SHORT CIRCUIT
SHORT CIRCUIT <0.75mA / 480VAC <0.75mA / 480VAC
<0.75mA / 480VAC 95 ~ 108% 95 ~ 108%
95 ~ 108% Protection type : Constant current limiting, recovers automatically after fault condition is removed Protection type : Constant current limiting, recovers automatically after fault condition is removed
Protection type : Constant current limiting, recovers automatically after fault condition is removed Constant current limiting, recovers automatically after fault condition is removed Constant current limiting, recovers automatically after fault condition is removed
Constant current limiting, recovers automatically after fault condition is removed 14.4 ~ 16.8V 18 ~ 21V 14.4 ~ 16.8V 18 ~ 21V
14.4 ~ 16.8V 18 ~ 21V 23 ~ 27V 23 ~ 27V
23 ~ 27V 28 ~ 34V 34 ~ 38V 28 ~ 34V 34 ~ 38V
28 ~ 34V 34 ~ 38V 41 ~ 46V 41 ~ 46V
41 ~ 46V 47 ~ 53V 47 ~ 53V
47 ~ 53V 54 ~ 60V 59 ~ 65V 54 ~ 60V 59 ~ 65V
54 ~ 60V 59 ~ 65V OVER VOLTAGE OVER VOLTAGE
OVER VOLTAGEOVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY
OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT TEMP. COEFFICIENT
TEMP. COEFFICIENT VIBRATION VIBRATION
VIBRATION Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery
Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery Shut down o/p voltage, recovers automatically after temperature goes down Shut down o/p voltage, recovers automatically after temperature goes down
Shut down o/p voltage, recovers automatically after temperature goes down -40 ~ +70 (Refer to "Derating Curve") -40 ~ +70 (Refer to "Derating Curve")
-40 ~ +70 (Refer to "Derating Curve") 20 ~ 95% RH non-condensing 20 ~ 95% RH non-condensing
20 ~ 95% RH non-condensing -40 ~ +80, 10 ~ 95% RH -40 ~ +80, 10 ~ 95% RH
-40 ~ +80, 10 ~ 95% RH 0.03%/ (0 ~ 60) 0.03%/ (0 ~ 60)
0.03%/ (0 ~ 60) 10 ~ 500Hz, 5G 12min./1cycle, period for72min. each along X, Y, Z axes 10 ~ 500Hz, 5G 12min./1cycle, period for72min. each along X, Y, Z axes
10 ~ 500Hz, 5G 12min./1cycle, period for72min. each along X, Y, Z axes SAFETY STANDARDSNote.7 UL8750, CSA C22.2 No. 250.0-13, IP65 or IP67 approved SAFETY STANDARDSNote.7 UL8750, CSA C22.2 No. 250.0-13, IP65 or IP67 approved
SAFETY STANDARDSNote.7 UL8750, CSA C22.2 No. 250.0-13, IP65 or IP67 approvedSAFETY & EMC SAFETY & EMC
SAFETY & EMCOTHERS OTHERS
OTHERS WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION
WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF DIMENSION EMC IMMUNITY MTBF DIMENSION
EMC IMMUNITY MTBF DIMENSION PACKING PACKING
PACKING I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC
I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH Compliance to EN55015, EN61000-3-2Class C (60% load ) ; EN61000-3-3, FCC part 15 class B Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, light industry level (surge 4KV),criteria A Compliance to EN55015, EN61000-3-2Class C (60% load ) ; EN61000-3-3, FCC part 15 class B Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, light industry level (surge 4KV),criteria A
Compliance to EN55015, EN61000-3-2Class C (60% load ) ; EN61000-3-3, FCC part 15 class B Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, light industry level (surge 4KV),criteria A 208K hrs min.MIL-HDBK-217F (25) 208K hrs min.MIL-HDBK-217F (25)
208K hrs min.MIL-HDBK-217F (25) 189*61.5*36.8mm (L*W*H) 189*61.5*36.8mm (L*W*H)
189*61.5*36.8mm (L*W*H) 0.77Kg; 18pcs/14.9Kg/0.89CUFT 0.77Kg; 18pcs/14.9Kg/0.89CUFT
0.77Kg; 18pcs/14.9Kg/0.89CUFTNOTE NOTE
NOTE 1. All parameters NOT specially mentioned aremeasured at 347VAC input, rated load and25 of ambient temperature. 1. All parameters NOT specially mentioned aremeasured at 347VAC input, rated load and25 of ambient temperature.
1. All parameters NOT specially mentioned aremeasured at 347VAC input, rated load and25 of ambient temperature. 2. Ripple & noisearemeasured at 20MHz of bandwidth by usinga 12" twistedpair-wireterminated with a 0.1uf & 47uf parallelcapacitor. 2. Ripple & noisearemeasured at 20MHz of bandwidth by usinga 12" twistedpair-wireterminated with a 0.1uf & 47uf parallelcapacitor.
2. Ripple & noisearemeasured at 20MHz of bandwidth by usinga 12" twistedpair-wireterminated with a 0.1uf & 47uf parallelcapacitor. 3. Tolerance : includes set up tolerance, line regulation andload regulation. 3. Tolerance : includes set up tolerance, line regulation andload regulation.
3. Tolerance : includes set up tolerance, line regulation andload regulation. 4. Please refer to "DRIVING METHODSOF LED MODULE". 4. Please refer to "DRIVING METHODSOF LED MODULE".
4. Please refer to "DRIVING METHODSOF LED MODULE". 5. Derating may be needed under low input voltages. Please check the staticcharacteristics for moredetails. 5. Derating may be needed under low input voltages. Please check the staticcharacteristics for moredetails.
5. Derating may be needed under low input voltages. Please check the staticcharacteristics for moredetails. 6. A Typeonly. 6. A Typeonly.
6. A Typeonly. 7. Safety andEMC design refer to EN60598-1, CNS15233, GB7000.1. 7. Safety andEMC design refer to EN60598-1, CNS15233, GB7000.1.
7. Safety andEMC design refer to EN60598-1, CNS15233, GB7000.1. 8. The powersupplyis considered a component which will be installed into a final equipment. The final equipment mustbe re-confirmed that it still meets 8. The powersupplyis considered a component which will be installed into a final equipment. The final equipment mustbe re-confirmed that it still meets
8. The powersupplyis considered a component which will be installed into a final equipment. The final equipment mustbe re-confirmed that it still meets EMC directives. For guidance on how to performthese EMC tests, please refer to "EMI testing of component powersupplies." EMC directives. For guidance on how to performthese EMC tests, please refer to "EMI testing of component powersupplies."
EMC directives. For guidance on how to performthese EMC tests, please refer to "EMI testing of component powersupplies." (as available on http://www.meanwell.com) (as available on http://www.meanwell.com)
(as available on http://www.meanwell.com) 9. Referto warranty statement. 9. Referto warranty statement.
9. Referto warranty statement. 10. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently 10. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently
10. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently connected to the mains. connected to the mains.
connected to the mains. File Name:HVG-65-SPEC 2015-05-11 File Name:HVG-65-SPEC 2015-05-11
File Name:HVG-65-SPEC 2015-05-11

Datasheet - PDF

Title:Language:Size:Type:
pdf1-Eingang: 180-528 AC / 254-747 DC, Ausgabe: 1, V1: 15, A1: 4,3 - MEANWELL - HVG-65-15A - HVG6515A English201 Kbytespdf1-Eingang: 180-528 AC / 254-747 DC, Ausgabe: 1, V1: 15, A1: 4,3 - MEANWELL - HVG-65-15A - HVG6515A

Bewertungen (0)

Es gibt keine Produktbewertungenvor.

Bewertung abgeben
Formular verstecken
Wertung:
Name:
E-Mail :
Betreff:
Text:
  Captcha
  Bewertung abgeben
Sie verwirrt?

Wenn Sie Fragen Kauf haben, können Sie die folgenden Links oder E-Mail

Bitte warten





* Pflichtfelder

oder